Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹21.7 L+₹2.5 L (13.2%)Rejected-Finance VILL JASSAI DISTRICT BARMER RAJ 344001 | JASSAI | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Highest | |
| 3 | Rejected-Technical V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | - | Rejected-Technical Rejected | |
| 4 | Rejected-Technical | - | Rejected-Technical Rejected |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
7 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BARMER
Military Engineer Services, Jalipa Military Station, Garrison Engineer (Army), Barmer, PIN 344001
REPAIRS CLEANING OF SEPTIC TANKS SEWAGE LINES SOAKAGE WELL IN ZONE A AT JALIPA MIL STN UNDER GE A BARMER
2022_MES_551036_1
8659/E8
Open Tender
Civil Works
Item Rate
330 days
GE ARMY BARMER
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (A) Barmer
₹40,000
7 Dec 2022
9 Sept 2022
8 Oct 2022
9 Sept 2022
7 Oct 2022
23 Sept 2022
Amount
Taking out & cleaning of sludge/mud/silt from manhole/septic tanks/ soakage pit of any capacity by manually or with mechanically device and removing of same beyond MoD premises. Note:- The measurement shall be taken before taking out the sludge/mud/silt from manhole/septic tanks/ soakage pit. All labour and T&P required i.e. manpower/ mechanically device for taking out sludge/mud/silt and arrangement for dispossed off it etc, shall be deemed included in unit rates quated by the contractor and and nothing extra shall be admissible on this account.
Taking out muddy/ sewage water from septic tank/ soakage pit/ manholes by using of mechanically sewage water diesel pump set of 5 HP power and dispossed off it through delivery pipe of required size more than 50 mtr away from pits/ septic tanks/ manholes. Note:- All labour and T&P i.e. sewage water pump set, diesel, transportation of pump set from one place to other place, suction pipe, delivery pipe and manpower etc required for above work, shall be deemed included in unit rates quoted by the contractor and nothing extra shall be admissible on this account.
Cleaning of blokage of sewage line 100 mm dia. In between manhole to manhole by providing sufficient labout to carry out the work including required tools for cleaning and removing & refixing of manholes cover slab etc complete.
Cleaning of blokage of sewage line 150 mm and 200 mm dia. In between manhole to manhole by providing sufficient labout to carry out the work including required tools for cleaning and removing & refixing of manholes cover slab etc complete.
Removing of blockage from WC/floor trap/Nahani by opeing grating and refixing the same by providing sufficient labour & tools as required etc complete.
Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150mm bore set in cement mortar including PCC in bed and haunching against side complete all as specified and as directed. Note :- Excavation and earth work shall be measured and paid separately.
All as per item No 6.00 above but in internal dia of pipe is 200mm
Demolition of brick work or cement concrete block or stone/boulder masonry built in cement mortar including all quoins arches pillars etc & removing unserviceable material in low lying area complete all as specified and as directed.
Site clearance including clearance of shrubs, vegetation, grass, bush, kikkars tree , weed, trees and saplings not exceeding 30 cm in girth, measured at a height of one meter above ground level & removing of dried thorn dumps, up rooting small dried stemps etc and removing entire rubbish out side MOD land complete all as specified and directed.
Excavation in trenches n.exc. 1.50 mtr wide and n.exc. 1.50 mtr in depth for foundation etc. or shafts, wells cesspits, manholes , pier holes etc. n.exc. 10 sqm on plan and getting out in hard and dense soil complete all as specified and as directed by Engineer in Charge. Note : Excavation will be done manually as there is not any freeplace for movement of any machinery at the site.
All as per item No 10 above but depth exceeding 1.50m but n. exc. 3.00 m and getting out hard and dense soil complete all as specified and as directed by Engineer in Charge.. Note : Excavation will be done manually as there is not any freeplace for movement of any machinery at the site.
Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete.
Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation , filling and mass concerete complete.
M&L Pre-cast cement concrete block type C-1 1:3:6 (20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 etc complete.
All as per Item No 15 above but except PCC block.
M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) etc complete all as specified and as directed.
All as per Item No 17 above but except fly ash bricks.
M & L random rubble stone walling well bonded, bedded and solidly hearted built in CM 1: 6 etc complete all as specified and as directed.
All as per Item No 19 above but except stone .
M&L for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in benching/ channels of manholes etc complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds , mitred/stopped ends etc. complete all as specified and as directed.
Add or deduct from above item for each 25 mm girth or part there of over or under 30 cm (item is for adjustment of rate)
M & L PCC 1:2:4 type B-1 20mm graded crushed stone aggregate as in coping including necessary form work complete all as specified and as directed
M&L, for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work/pcc blocks/stone masonry surfaces mixed with water proofing compound as per manufacturer instructions & finished the surfaces even and smooth with using extra cement complete all as specified and as directed.
M&L, for rendering 10 mm thick cement plaster in cement mortar (1:4) on fair faces of brickwork /pcc block/stone masonry surfaces finished even and smooth without t using extra cement complete all as specified and as directed.
S&F for 150 mm dia. Salt glazed stone ware drain pipe laid in trenches and jointed with cement joint with cement mortar 1:1 complete all as specified and as directed.
S&F for 100 mm dia. Salt glazed stone ware drain pipe laid in trenches and jointed with cement joint with cement mortar 1:1 complete all as specified and as directed.
S & F Reinforced concrete pipes 200, one end socketed class NP2, laid and jointed complete.
S & F Reinforced concrete pipes 150, one end socketed class NP2, laid and jointed complete.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) as in bed to drain pipe 150 mm bore including packing under and haunching against the side of salt glazed stone ware drain pipe after they are laid and tested complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) as in bed to drain pipe 100 mm bore including packing under and haunching against the side of salt glazed stone ware drain pipe after they are laid and tested complete all as specified and as directed.
M & L Concrete bed to drain pipes 200mm bore 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) including forming cradles;
M & L Concrete bed to drain pipes 150mm bore 1:4:8 type D-2 (using 40 mm graded crused stone aggregate) including forming cradles;
Demolition of RCC manhole covers/ septic tank and soak pit slabs in any position not other wise specifically provided complete all as specified and as directed by Engr in Charge
M&L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in precast manhole covers slab as specified and as directed.
S&F mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape, required , including cranking , bending spirally or hoping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr in Charge.
Form work to sofits of suspended slabs such as roof slabs, floor slab, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for fair finished
M&L for RCC 1:2:4 Type B-1 using 20mm graded stone aggregate in slabs suppoorted on walls,beams and column in floors,roof,landings,balconies,canopies,deck slab and in shevels the like.
S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape, required , including cranking , bending spirally or hoping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr in Charge.
Returning filling in including spreading , leveling , watering and well ramming in layer n. exc 25 cm complete all as specified and as directed.
Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level n. exc. 1.50 mtr above the starting point complete all as specified and as directed.
S & Fixed in repairs for Salt-glazed stoneware gully traps, square or round mouthed, type 'P' Size of gully traps 150 X 150 mm complete all as per specified and directed by Engr-in-Charge
Cutting into existing manholes for connecting new drains, marking good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm bore pipe.
All as per Item No 44 above but for removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchings.
Cutting salt-glazed stone ware drain pipe in position including supplying, fixing and jointing double socket to old pipe and jointing spigot end of new pipe to same including jointing socket end of old pipe to same with packed spun yarn and cement mortar 1:1 complete all as specified and as directed.
Taking down PVC rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
S&F 110mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls, fixed in repairs.
S&F 75mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls, fixed in repairs.
S&F 110mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors.fixed in repairs
S&F 75mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors.fixed in repairs
S&F 110mm dia PVC(SWR)pipes bends any radious with access doors. ,fixed in repairs.
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access doors
S&F PVC (SWR), junction double, (double T), equal or unequal 75mm diawith access doors.
S&F in repair water closet (squatting pattern) complete including provision of lime concrete bedding viterous china squatting pan orrisa pattern of size 580x440 mm white with P or S trap front or back inlet and foot rest any pattern etc complete.
S&F in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet,ball valve, float and handle including brackets etc complete.
M& L rendering15 mm thick in CM 1:4 in wall and floors of sunken floors mixed with liquid water proofing compound and finished the surfaces even and smooth in required slope using extra cement over 25 mm thick PCC (1:3:6)type C in sunken portion including a tack coat of industrial bitumen 85/25 grade @1.20 Kg per sqm over bitumen primer and providing 150 micron black polythin film on bitumen coat including seapage testing by water ponding test and demolition of existing plaster / concrete all as specified & directed.
Supplying only liquid Integral waterproofing compound etc comptete.
S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) all as specified and as directed .
m/s jogaram sujaram
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .