Tender ID

Karnataka

Retender

Works

Buildings

Package(2) Renovation work at APMC Market, Development work in Ambedkar Bhavana, Fensing work at Bus stand, Construction of Box drain, Repair and Renovation of Hanging Bridge, Renovation work of Auto stand, Renovation of Samudaya bhavana, Fish market, Construction and Renovation of Toilet buildings, Construction of Sopanakatte, Installation of RO Plant in Sringeri Town Panchayath (In Ward no 1, 2, 4, 5, 7,10 and 11) in Chikmagalur District

Directorate Of Municipal Administration

DMA District Urban Development Cell Chikkamagaluru | Karnataka

Amount: ₹1.7 CrCloses: 29 Jun 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published15 Jun 2024
Closed29 Jun 2024
Retendered15 Jun 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 15 Jun 2024

Tender Value

₹1.7 Cr

EMD Value

₹2.5 L

Closing Date

29 Jun 2024, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Directorate of Municipal Administration

Contact Person

Matikatte S S

Office Number

Mobile Number

Work Description

Package(2) Renovation work at APMC Market, Development work in Ambedkar Bhavana, Fensing work at Bus stand, Construction of Box drain, Repair and Renovation of Hanging Bridge, Renovation work of Auto stand, Renovation of Samudaya bhavana, Fish market, Construction and Renovation of Toilet buildings, Construction of Sopanakatte, Installation of RO Plant in Sringeri Town Panchayath (In Ward no 1, 2, 4, 5, 7,10 and 11) in Chikmagalur District

Tender Information

Tender ID

DMA/2023-24/BD/WORK_INDENT16267/CALL-2

Reference Number

DMA/2023-24/BD/WORK_INDENT16267/CALL-2

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

DMA District Urban Development Cell Chikkamagaluru

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with balance sheets showing contract receipts approved by CA with UDIN number from 2018-19 to 2022-23

RequiredKPWD Class III and above Registration

Requiredliquid assets and /or availability of credit facilities of not less than Rs 49.75 Lakhs in the prescribed format in KW

RequiredMandating Satisfactory completion as a prime contractor, for at least one Similar nature of work. i.e BUILDING work of value not less than Rs. 82.93 Lakhs. from 2018-2019 to 2022-2023

RequiredGST declaration Form

RequiredEPF registration certificate with APRIL-2024 challan copy

RequiredTotal value of civl engineering works executed and payments received in the last five years year-wise

RequiredBID CAPACITY CALCULATION SHEET

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

Before Executing item No: 108 (Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete.) Prior approval to be taken by the Superintending Engineer. It is necessary.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPP Portal on or before the last date and time of bid submission.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP Portal due to internet connectivity issues and technical glitches at bidders end.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tenderer should be a PWD registered Contractor - Class-3 and above also Contractors should have Registration of GST, Employers Provident Fund and tenderer should submit Registration Certificate along with technical bid.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund and Contractors should follow strictly prevailing rules of labour act.

Conditional tenders will not be accepted.

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. The item rates quoted shall include cost of royalty charges on construction materials & other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

The bidder shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable and The employer is not responsible for any delay in accessing KPP Portal.

All Scanned Documents of the Original should be up-loaded, Executive Engineer/ Superintending Engineer/ Chief Engineer reserves the right verify the Original Documents before approval, 0riginal documents / Certificates for qualification shall be produced when called for during evaluation of tender.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

The Tenderer should maintain the Work during defective liability period as indicated in The Contract Data

The materials like bitumen, Steel, Cement etc., required for the work shall be procured by the tenderer themselves and should be got tested by the Quality Control Authority before use on the work.

Tenderer shall obtain the Work done Certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the tender. The Original Certificate shall be produced at the time of opening of Technical Bids for physical verification.

If the tender of the successful tenderer is seriously unbalanced in relation to the Employers estimate of the cost of the work to be performed under the contract, the Employer may require the Tenderer to produce detailed price analysis for any or all items of the Bill of Quantities, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed. After evaluation of the price analyses, the Employer may require that the amount of the performance security set forth in Clause 24 be increased at the expense of the successful Tenderer to a level sufficient to protect the Employer against financial loss in the event of default of the successful under the contract.

As per Government order FD 447 EXP-12 2022 dated 30/07/2022, 18% GST will be added to the Contract amount separately. And Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18% of Amount Put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in Common SR (GO:PWD 51 RDF 2019 Bangaluru Dt:18.03.2022). Therefore, amount put to Tender and ECV amount are excluding GST. KPP-PORTAL format has No Options to add GST Separately at stage of Draft Tender Schedule Process for Over All amount put to Tender, tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. Hence, Contractor has to quote the rates excluding GST and the GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily.

The employer reserves the rights to reject one or all tenders without assigning any reason.

In case if the death of a contractor, after executing the agreement / commencement of the work, his legal heir, is an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

PERFORMANCE SECURITY - The successful tenderer shall furnish Performance Security Deposit (Achievement Guarantee) at 5% of the amount put to tender with in 20 days after approve of tender as per rule 29.5 of the tender and clause 44 of the agreement in the form of cash/Bankers Cheque, D.D, Pay order Bank Guarantee or N.S.Cs, duly pledged in the name of EXECUTIVE ENGINEER, DUDC Chikmagalur Division.

All documents should be uploaded by the contractor is to be attested by the authorized notary or not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when saught for .Failure to produce original documents leads to rejection of Tender.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Item for which no rates or price has been entered in will not be paid for by the Employer when executed & shall be deemed covered by the other rates & prices in the bill of quantities.

The tender validity period is 90Days from the date of opening of Tender

Contractors has to upload the EPF Registration with APRIL 2024 Challan Copy Contractors has to submit their labour EPF details with every Running Bill

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Bid document.

Statement indicating A the total value of the civil engineering works executed and payment received in last 5 years certified by the chartered accountant to be scanned and uploaded B work performed as a prime contractor on works of similar nature during the last 5 years Scanned copy of the Work done Certificate issued by competent Authority of rank not less than Executive Engineer should be uploaded necessary details shall be uploaded as per the respective formats furnished along with the qualification information.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i e 2018-19, 2019-20, 2020-21,2021-22 & 2022-23 a achieved in at least two financial year a minimum financial turnover of Rs.331.72 Lakhs in all classes of Civil Engineering Construction works only Submit the scanned copy of the Profit & loss Statement indicating the contract receipts certified by the chartered accountant

To qualify for Award of this contract, each Tenderer in its name should have in the last five years i e 2018-19, 2019-20, 2020-21,2021-22 & 2022-23 satisfactorily completed as prime contractor, at least one similar work value not less than Rs.82.93 Lakhs Scanned copy of the Work done Certificate issued by competent Authority of rank not less than Executive Engineer should be uploaded.

To qualify for award of this contract, each tenderer should furnish qualification information as per section 3 of Standard Tender Document attached to this tender AND Should up-load Scan copy of pan card Valid GST Registration Certificate & also up-load address proof certificate Aadhar Card DL Pass port etc.,

The Tenderer or his identified sub contractor should possess valid licence for executing Repair and Maintenance of Suspension Foot Bridge The Contractor should upload the similar nature work for executing Repair and Maintenance of Suspension Foot Bridge for Rs. 4.46 lakhs. Since this is special nature of work, If the contractor is not having such work done certificate he should upload an agreement copy made with the workers AGENCY who execute this type of work. usually not less than 50percent of Repair and Maintenance of Suspension Foot Bridge. in any one year

Technical Criteria

General

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

The Tenderer or his identified sub-contractor should possess valid licence for executing Repair and Maintenance of Suspension Foot Bridge The Contractor should upload the similar nature work for executing Repair and Maintenance of Suspension Foot Bridge for Rs. lakhs. Since this is special nature of work, If the contractor is not having such work done certificate he should upload an agreement copy made with the workers AGENCY who execute this type of work usually not less than 50percent of Repair and Maintenance of Suspension Foot Bridge in any one year4.46

Work Done Certificate

To qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19,2019-20,2020-21,2021-22 & 2022-23 satisfactorily completed as prime contractor, at least one similar work such as BUILDING work value not less than Rs.82.93 Lakhs

Work Done Certificate

The Tenderer should have executed in any one year (in the last five years i.e. 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23 the following minimum quantities of work . 1.EWE/EMBANKMENT:1100.00 Cum , 2.Cement concrete (PCC/RCC) : 323.30 Cum,3.MS GRILL:748.00kg, 4.REIN FORCEMENT (TMT STEEL) : 13.36 MT,5.PLASTERING:1197.50 Sqm,6.BBM / SOLID CONCRETE BLOCKS:70.00 Cum

Work Done Certificate

Capabilities of Vendor

Statement indicating the (A)Existing commitments and ongoing works, (B)Details of works for which tenders are already submitted . The statements should furnished as per statement 1.5 (A),(B) of Section 3 of Qualification information in Standard Bid document.

Others -- Details work listed in the Statement should be counter signed by the EE or Equivalent officer

Contractor has to upload GST Declaration Certificate in the prescribed format.

Others -- declaration format

PWD class- 3 and above Registration Certificate (Valid License copy issued by competent authority.)

PWD Registration Certificate (Class I/II/III/IV)

Contractors has to upload the EPF Registration with APRIL 2024 Challan Copy

Others -- valid documents

Financial Status

Statement indicating the total value of the civil engineering works executed and payment received in last 5 years i.e. 2018-19,2019-20,2020-21.2021-22 & 2022-23certified by the chartered accountant to be scanned and uploaded necessary details shall be uploaded as per the respective formats furnished along with the qualification information.

Others -- Submit the Profit & loss Statement indicating the contract receipts certified by the chartered accountant

Each tenderer should further demonstrate: liquid assets and / or availability of Credit facilities of not less than Rs.49.75 Lakhs (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc., IN PRISCRIBED FORMAT

Line of Credit

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2018-19,2019-20,2020-21,2021-22 & 2022-23 (a) achieved in at least two financial years financial turnover of Rs.331.72 Lakhs, (in all classes of Civil Engineering Construction works only (in all classes of Civil Engineering Construction works only (Submit the scanned copy of the Profit & loss Statement indicating the contract receipts certified by the chartered accountant along with audit report & IT returns)WITH UDIN NUMBER

Others -- Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹4,150

EMD Fee Amount

₹2.5 L

Important Dates

Last Activity

15 Jun 2024

Published

15 Jun 2024

Bid Opening

30 Jun 2024

Download Ends

25 Jun 2024

Pre-Bid Meeting

20 Jun 2024

BOQ Preview

•

Package(2) Renovation work at APMC Market, Development work in Ambedkar Bhavana, Fensing work at Bus stand, Construction of Box drain, Repair and Renovation of Hanging Bridge, Renovation work of Auto stand, Renovation of Samudaya bhavana, Fish market, Construction and Renovation of Toilet buildings, Construction of Sopanakatte, Construction of Water treatment plant and other works (In Ward no 1, 2, 4, 5, 7,10 and 11) In Sringeri Town Panchayath Chikmagalur District

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Providing & fixing of 2track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastome...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

•

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...

•

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of Engi...

•

Distempering with oil bound washable distemper of approved brand an manufacture to give an even shade : New work (two coats) over and including water thinnable priming coat with cement primer after t...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

•

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC ) pipes having thermal stability for hot and cold water supply, including all CPVC plains and brass threaded fittings, i/c fixing the pipe with...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.One urinal basin with 5 litre white P.V.C. auto...

•

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and l...

•

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- Including cost and conveyance of all materials, labour, hire charges of machin...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...

•

Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lifts, load...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

14.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rect...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS ;12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and o...

•

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted w...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall ---- Incl...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi stran...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- Including cost and conveyance of all materials, labo...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.3 6A Three Way socket ---- Including cost and conveyance of all material...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ---- Including cost and conveyance of all materials, labour, h...

•

Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 1 x 4' Tube light fitting. ---- Including c...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers. 32 A ---- Including cost and conveyance of all materials, labour, hire char...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

•

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...

•

Supplying of 1.1 kv LT UG cable XLPE or heat resistant PVC insulated , PVC extruded inner sheath armoured UG LT cable as per IS - 1554 ( Part -1)or IS-7098 Part-1, Armouring strip thickness in averag...

•

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall includi...

•

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials to the appropriate disposal area as per d...

•

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...

•

Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers ...

•

Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including cost and conveyance of all materials, labour, hire charges of machi...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Providing, laying and spreading available soil in the embankment on a prepared surface, pulverising, mixing the spreaded soil in place with Soil Stabilisor with 2% of cement using Binder spreader mach...

•

Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, sc...

•

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...

•

Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...

•

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges...

•

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of app...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

•

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ---- Including cost and conveyance of ...

•

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

•

Complete cleaning of all metal parts like Suspenders, Transoms, roadbearer beams, stiffening Girders, side mesh, flats, for dust, mud deposits and washing of components wherever required ---- Includin...

•

Provoding & fixing of New Chainlink fencing mesh(50X50X3.8MM) - 0.9M ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lifts, lo...

•

Refixing of chainlink mesh with minor repairs wherever necessary. ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lifts, loadi...

•

Complete painting of all metal parts(one coat of enamel Paint), greasing of Steel wire rope, Protective Coating to the rope at anchors and covering over with coal tar to make the embedded rope rust pr...

•

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appropriate disposal area as per direction of Engineer-in-charge. ---- Including cost...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. A Boulder Laid ...

•

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out...

•

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...

•

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...

•

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10mm gap for thermal expan...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

•

Providing and fixing brass bib cock of approved quality 20 mm nominal bore ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lif...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

•

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. (i/c equivalent design mix) ---- Inclu...

•

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposa...

•

Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

•

Providing corrugated cement asbestos Ridge sheets set in C.M. 1:3 and pointed with C.M. 1:3. ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments wit...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1cement :4 coarse sand) incl...

•

Repair of pull and push type rolling shutters of made of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel l...

•

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white c...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

•

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation ...

•

Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free wit...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia ---- Including cost and conveyance of all materials, labour, hire charge...

•

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g ---- Including cost and conveyance of all materials, labour, hire cha...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions andcorners, all necessary fittings complete, including applying a primin...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

•

Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per t...

•

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

•

Supplying of 1.1KVLTUG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheathar moured UGLT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thick ness inaverage +5%and ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS3854 Stepped Fan Regulator. ---- Including cost and conveyance of all materials, labour, hire c...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- Including cost and conveyance of all material...

•

Supplying and fixing regular MCB distribution board son wall / woodboard / flush mounting using required clamps, bolts, nut setc., with provision for fixing suitable type capacity MCB's singlephase / ...

•

Supplying and fixing miniature circuit breaker son existing MCB distribution board susing necessary fixing material sand 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying & Fixing Chemical earthling for grounding. Conduits, IC cutouts & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior F...

•

Supplying AND fixing of retrofit typeLED bulbW with OPA Lacrylic diffuser comprising of LED source with CCT6500degree K, CRIGREATER THAN70PERCENT. efficacy GREATER HAN 80lumen per watt, lifeGEATER THA...

•

Supplying fixing and wiring Electronic Trivector Meter ETV 5 to 32 63 Amps three phase 4 wire whole current class1 Accuracy Energy Meter ---- Including cost and conveyance of all materials, labour, hi...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

sringeri KW-4 165.86lakh-1.doc

Tender Document • 3.03 MB

GST DECLARATION CERTIFICATE.docx

Others - GST DECLARATION FORMAT • 0.01 MB

required docs only upload in eproc.pdf

Instructions to Tenderers • 0.84 MB

kw-4_Qualification information SRINGERI.doc

Others - QUALIFICATION INFORMATION TO BE UPLOADED BY THE CONTRACTOR AFTER GETTING ATTESTATION BY THE NOTARY OR BY THE GAZETTED OFFICER • 0.10 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Package(2) Renovation work at APMC Market, Development work in Ambedkar Bhavana, Fensing work at Bus stand, Construction of Box drain, Repair and Renovation of Hanging Bridge, Renovation work of Auto stand, Renovation of Samudaya bhavana, Fish market, Construction and Renovation of Toilet buildings, Construction of Sopanakatte, Installation of RO Plant in Sringeri Town Panchayath (In Ward no 1, 2, 4, 5, 7,10 and 11) in Chikmagalur District

Directorate Of Municipal Administration

DMA District Urban Development Cell Chikkamagaluru | Karnataka

Amount: ₹1.7 CrCloses: 29 Jun 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published15 Jun 2024
Closed29 Jun 2024
Retendered15 Jun 2024