Coal India

Financial BO

Works

Miscellaneous Works

Repairing of drive drum, driven drum and discharge drum with equalizing gear set of TB-1 belt at Rani Atari UG Mine, Rani Atari Sub Area.

South Eastern Coalfields Limited

Rani Atari UG Mine | Gaurella Pendra Marwahi, Chhattisgarh

Amount: ₹1.7 LCloses: 12 Jun 20268 Jun 2026Closed

Timeline

Published27 May 2026
Closed12 Jun 2026
Technical Evaluation16 Sept 2026
Financial Evaluation16 Sept 2026
Award—

Bids

Item Rate

2 Bids16 Sept 2026

#	Company	Amount	Rank	Status
1	SHAKTI ENTERPRISES L1₹1.4 LAdmitted-Finance IN FRONT OF GM COMPLEX CHIRIMIRI DISTT MCB C G 497773 \| CHIRIMIRI \| MCB \| CG \| 497773	₹1.4 L	L1	Admitted-Finance
2	SAI ENGINEERING COMPANY Rejected-Technical 490 41 ROORKEE ROAD NEAR SHAHARANPUR BUS STAND MUZAFFARNAGAR UTTAR PRADESH 251002 \| MUZAFFARNAGAR \| UTTAR PRADESH \| 251002	-	-	Rejected-Technical As per tender committee recommendation.

BoQ Comparative

Line Items (11)

Sl No	Description	Qty	Unit	SHAKTI ENTERPRISES L1
1.00Repairing of drive drum
1.10	Cost of the end plate EN-8 03 nos. Size - 800 X 800 X 20mm plate - 02 nos. (101 kg X 2) Size - 1000 X 1000 X 20mm plate - 01 no. (157 kg X 1) Total weight (101kg X 2 nos.) + (157kg X 1 no) = 359 kg 359kg + 17.95kg (5% wastage) = 376.95 kg	376.95	Kgs	52 ₹19,601.4 Lowest
1.20	Cost of end plate machining	2	Nos.	1,650 ₹3,300 Lowest
1.30	Cost of Bush for fitting 01 set for each shaft, EN-8 (01 set = 02 nos.)	3	Set	9,820 ₹29,460 Lowest
1.40	Cost of materials for new shaft EN-8 size (OD-95mm X 1450mm length) = 81kg X 3nos. = 243kg 243 Kg + 12.15 kg (5% wastage) = 255.15 kg	255.15	Kgs	73 ₹18,625.95 Lowest
1.50	Cost of machining of new shaft as per dimension	3	Nos.	5,050 ₹15,150 Lowest
1.60	Cost of final machining aligning and fitting	3	Nos.	1,150 ₹3,450 Lowest
1.70	Cost of square key	6	Nos.	570 ₹3,420 Lowest
2.00Repairing of Equalizing Gears
2.10	Cost of welding of bore with special welding electrodes machinable (3kg)	2	Job	15,300 ₹30,600 Lowest

Corrigenda

Corrigendum

1 updatesLatest on 8 Jun 2026Submission Ends:8 Jun 202612 Jun 2026

Date changes

Download Ends8 Jun 202612 Jun 2026Submission Ends8 Jun 202612 Jun 2026Bid Opening9 Jun 202613 Jun 2026

Tender Value

₹1.7 L

EMD Value

₹2,100

Closing Date

12 Jun 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

Staff Officer (EnM), Chirimiri Area

Address

Office of the General Manager, SECL Chirimiri Area , P.O. West Chirimiri, Distt. MCB (C.G.) 497773

Work Description

Repairing of drive drum, driven drum and discharge drum with equalizing gear set of TB-1 belt at Rani Atari UG Mine, Rani Atari Sub Area.

Tender Information

Tender ID

2026_SECL_360379_1

Reference Number

SECL/CHRM/EM/e-NIT/26-27/22 Dtd. 27.05.2026

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Item Rate

Period of Work

15 days

Location

Rani Atari UG Mine

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per NIT

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical

RequiredWork Experience (.pdf)

RequiredDSC Authorization (.pdf)

RequiredUndertaking Annexure-XV (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

EMD Fee Amount

₹2,100

Important Dates

Last Activity

16 Sept 2026

Published

27 May 2026

Bid Opening

13 Jun 2026

Download Starts

27 May 2026

Download Ends

12 Jun 2026

Submission Starts

28 May 2026

Clarification Period

28 May 2026 - 4 Jun 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repairing of drive drum
1.1	Cost of the end plate EN-8 03 nos. Size - 800 X 800 X 20mm plate - 02 nos. (101 kg X 2) Size - 1000 X 1000 X 20mm plate - 01 no. (157 kg X 1) Total weight (101kg X 2 nos.) + (157kg X 1 no) = 359 kg 359kg + 17.95kg (5% wastage) = 376.95 kg	376.95	Kgs	52.12	₹19,646.63
1.2	Cost of end plate machining	2	Nos.	1,675	₹3,350
1.3	Cost of Bush for fitting 01 set for each shaft, EN-8 (01 set = 02 nos.)	3	Set	9,828	₹29,484
1.4	Cost of materials for new shaft EN-8 size (OD-95mm X 1450mm length) = 81kg X 3nos. = 243kg 243 Kg + 12.15 kg (5% wastage) = 255.15 kg	255.15	Kgs	73.97	₹18,873.45
1.5	Cost of machining of new shaft as per dimension	3	Nos.	5,100	₹15,300
1.6	Cost of final machining aligning and fitting	3	Nos.	1,170	₹3,510
1.7	Cost of square key	6	Nos.	585	₹3,510
2Repairing of Equalizing Gears
2.1	Cost of welding of bore with special welding electrodes machinable (3kg)	2	Job	15,500	₹31,000

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.05 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.83 MB

Tendernotice_2.pdf

PDF • 1.11 MB

Work Item Documents

BOQ_373248.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SHAKTI ENTERPRISES

L1₹1.4 LAdmitted-Finance

IN FRONT OF GM COMPLEX CHIRIMIRI DISTT MCB C G 497773 | CHIRIMIRI | MCB | CG | 497773

SAI ENGINEERING COMPANY

Rejected-Technical

490 41 ROORKEE ROAD NEAR SHAHARANPUR BUS STAND MUZAFFARNAGAR UTTAR PRADESH 251002 | MUZAFFARNAGAR | UTTAR PRADESH | 251002

Sl No	Description	Qty	Unit	SHAKTI ENTERPRISES L1
1.00Repairing of drive drum
1.10	Cost of the end plate EN-8 03 nos. Size - 800 X 800 X 20mm plate - 02 nos. (101 kg X 2) Size - 1000 X 1000 X 20mm plate - 01 no. (157 kg X 1) Total weight (101kg X 2 nos.) + (157kg X 1 no) = 359 kg 359kg + 17.95kg (5% wastage) = 376.95 kg	376.95	Kgs	52 ₹19,601.4 Lowest
1.20	Cost of end plate machining	2	Nos.	1,650 ₹3,300 Lowest
1.30	Cost of Bush for fitting 01 set for each shaft, EN-8 (01 set = 02 nos.)	3	Set	9,820 ₹29,460 Lowest
1.40	Cost of materials for new shaft EN-8 size (OD-95mm X 1450mm length) = 81kg X 3nos. = 243kg 243 Kg + 12.15 kg (5% wastage) = 255.15 kg	255.15	Kgs	73 ₹18,625.95 Lowest
1.50	Cost of machining of new shaft as per dimension	3	Nos.	5,050 ₹15,150 Lowest
1.60	Cost of final machining aligning and fitting	3	Nos.	1,150 ₹3,450 Lowest
1.70	Cost of square key	6	Nos.	570 ₹3,420 Lowest
2.00Repairing of Equalizing Gears
2.10	Cost of welding of bore with special welding electrodes machinable (3kg)	2	Job	15,300 ₹30,600 Lowest

Sl No

Description

Qty

Unit

SHAKTI ENTERPRISES

1.00Repairing of drive drum

1.10

Cost of the end plate EN-8 03 nos. Size - 800 X 800 X 20mm plate - 02 nos. (101 kg X 2) Size - 1000 X 1000 X 20mm plate - 01 no. (157 kg X 1) Total weight (101kg X 2 nos.) + (157kg X 1 no) = 359 kg 359kg + 17.95kg (5% wastage) = 376.95 kg

376.95

Kgs

₹19,601.4

Lowest

1.20

Cost of end plate machining

Nos.

1,650

₹3,300

Lowest

1.30

Cost of Bush for fitting 01 set for each shaft, EN-8 (01 set = 02 nos.)

Set

9,820

₹29,460

Lowest

1.40

Cost of materials for new shaft EN-8 size (OD-95mm X 1450mm length) = 81kg X 3nos. = 243kg 243 Kg + 12.15 kg (5% wastage) = 255.15 kg

255.15

Kgs

₹18,625.95

Lowest

1.50

Cost of machining of new shaft as per dimension

Nos.

5,050

₹15,150

Lowest

1.60

Cost of final machining aligning and fitting

Nos.

1,150

₹3,450

Lowest

1.70

Cost of square key

Nos.

570

₹3,420

Lowest

2.00Repairing of Equalizing Gears

2.10

Cost of welding of bore with special welding electrodes machinable (3kg)

Job

15,300

₹30,600

Lowest

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repairing of drive drum
1.1	Cost of the end plate EN-8 03 nos. Size - 800 X 800 X 20mm plate - 02 nos. (101 kg X 2) Size - 1000 X 1000 X 20mm plate - 01 no. (157 kg X 1) Total weight (101kg X 2 nos.) + (157kg X 1 no) = 359 kg 359kg + 17.95kg (5% wastage) = 376.95 kg	376.95	Kgs	52.12	₹19,646.63
1.2	Cost of end plate machining	2	Nos.	1,675	₹3,350
1.3	Cost of Bush for fitting 01 set for each shaft, EN-8 (01 set = 02 nos.)	3	Set	9,828	₹29,484
1.4	Cost of materials for new shaft EN-8 size (OD-95mm X 1450mm length) = 81kg X 3nos. = 243kg 243 Kg + 12.15 kg (5% wastage) = 255.15 kg	255.15	Kgs	73.97	₹18,873.45
1.5	Cost of machining of new shaft as per dimension	3	Nos.	5,100	₹15,300
1.6	Cost of final machining aligning and fitting	3	Nos.	1,170	₹3,510
1.7	Cost of square key	6	Nos.	585	₹3,510
2Repairing of Equalizing Gears
2.1	Cost of welding of bore with special welding electrodes machinable (3kg)	2	Job	15,500	₹31,000

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Repairing of drive drum

1.1

376.95

Kgs

52.12

₹19,646.63

1.2

Cost of end plate machining

Nos.

1,675

₹3,350

1.3

Cost of Bush for fitting 01 set for each shaft, EN-8 (01 set = 02 nos.)

Set

9,828

₹29,484

1.4

Cost of materials for new shaft EN-8 size (OD-95mm X 1450mm length) = 81kg X 3nos. = 243kg 243 Kg + 12.15 kg (5% wastage) = 255.15 kg

255.15

Kgs

73.97

₹18,873.45

1.5

Cost of machining of new shaft as per dimension

Nos.

5,100

₹15,300

1.6

Cost of final machining aligning and fitting

Nos.

1,170

₹3,510

1.7

Cost of square key

Nos.

585

₹3,510

2Repairing of Equalizing Gears

2.1

Cost of welding of bore with special welding electrodes machinable (3kg)

Job

15,500

₹31,000