PROVN OF WAITING AREA IN OPEN SPACE BLDG NO.02, PROVN OF TILED FLOORING AT BLDG NO 08 AT MH,SOME REVENUE AND MINOR WORKS OF AGE B/R (SOUTH) NO I , II AND AGE E/M (SOUTH) UNDER GE (SOUTH) SECUNDERABAD

Amount

Excavation in trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation of manhole etc and getting out as in hard/dense soil complete all as specified & directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil

Material and Labour for sand filling under floor including watering and consolidation complete all as specified and as directed .

Returning , filling in hard/dense soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick, including watering ,ramming complete all as specified and as directed .

Removing of soil to distance n.exc 50 mtr and depositing at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed .

Removing the excavated soil to a distance exc 250.0 m and n.exc 500 .0m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and as directed..

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not execeeding 50 M and making good surface.

Excavating over areas, n exc 1.5 m deep and getting out as in hard/dense soil complete all as specified and as directed.

Material and Labour for hardcore with broken stone or boulder n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and ramming to a true surface complete all as specified and as directed.

Material and labour for providing cement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete / sunken floor complete all as specified and as directed

Material & labour for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate ) as in coping / Kerbs including necessary formwork complete all as specified .

Supply only integral water proofing compound .

Material & labour for PCC 1:3:6 Type C-1 ( using 20 mm graded stone aggregate ) as in surface channel complete all as specified and as directed .

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement complete all as specified and as directed .

Material and Labour for precast RCC ( 1: 2:4 ) Type B-1 ( using 20 mm graded stone aggregate ) as in cover slab incl form work and set in position with cement mortar ( 1:4 ) complete all as specified and as directed .

M&L for Reinforced cement concrete 1:2:4 type B-1 (nominal mix) using (20 mm graded stone aggregate) for slabs supported on walls, beams landings, balconies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L PCC 1:3:6 type C2 using 40mm graded stgone aggregate as in foundation filling and post holes complete all as specified and directed.

M & L for reinforced Cement Concrete (Nominal mix) type B1 1:2:4 (using 20 mm graded granite stone aggregate) in foundations including rafts, footings and mass concrete, foundation beams, plinth beams, bases for columns, basement slabs etc all as specified and directed.

M & L for reinforced Cement Concrete (Nominal mix) type B1 1:2:4 (using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts all as specified and directed.

Material and labour for brick work with sub class B bricks , straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6. all as specified and as directed. .

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) including finish the surface fair and even complete all as specified and as directed.

M&L for use & waste of rough finished flat Form work to sides of concrete foundations rafts, footing, base of columns, raft and raft beams, sides & soffits of foundation (if any) of foundation and plinth beams and similar work all as specified and directed.

Use & waste of rough finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and as directed.

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete all as specified and as directed.

supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F in repair stainless steel sink with draining board made out of 1.00 mm thick sheet for kitchen with plug and washers, waste pipe with cantilever brackets.over all size 914 X 460mm bowl size 405mm X 354mm X203mm complete all as specified and as directed Cat No. 1239D of PRAYAG or equivalent make of NIRALI / PARRYWARE.

S&F Stainless Steel Kitchen Plate Rack of 28 gauge size 34" x 35" x 9"

S & F 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm length Aluminium handles fabricated type anodised complete all as specified and as directed.

S&F in repairs 150mm long Aluminium handles cast type, anodised complete all as specified

M&L 100mm long butt hinges,extruded aluminium alloy with galvaniseed mild steel hinge pin, anodised and fixed

S&Fin repairs 100mm long SS butt hinges, medium weight cold rolled complete all as specified and as directed

S&F in repairs anodised aluminium alloy curtain rail, cromium plated with fixing brackets, stops, roller etc complete all as specified and as directed.

S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified.

S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples complete all as specified and as directed

Supply and fix plates ( plain or chequered ) as per IS-3502 ( Base IS-10748 Gr-II ) square or rectangular cut or notched ( ordinary and counter shunk ) forming holes, without any attachment complete all as specified and as directed .

M&L MS Steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails other connecting plates of Fe 410 -W (Gde- E- 250) complete all as specified and directed.

Supply and fix Rolled mild steel compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc confirming to Fe 410-W(Gde-E- 250) quality 'A' complete all as specified and directed .

Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grade St-240 complete all as specified and as directed .

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut of length exc 5cm and n.exceeding 10 cm long and 11 to 15 mm dia of neck complete all as specified and as directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut of length exc 15cm and n.exceeding 22.5 cm long and 11 to 15 mm dia of neck complete all as specified and as directed.

Supply only mild steel 10mm diameter of shank screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15cm and n.exc 22.5cm long complete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips all as specified and directed. .

M&L for Mild steel TMT bars 8 mm dia and over cut to length bent to shape required including cranking, bending spirally including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending as required and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed .

Supply only MS 10mm dia round bars as line wire for holding chain link mesh complete all as specified and as directed.

Supply and fix Mild steel work for balusters , handrails etc including cleats , brackets confirming to Fe -290 ( Gde E-165 ) complete all as specified and as directed .

M&L for mild steel TMT bars bars 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders cut to length bent to shap required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

M&L for provn of false ceiling with anodised aluminium snap grid frame work with size of grid 600 x 600mm with aluminium main tee size 25 x25 x 1.6mm, cross tee of size 25 x 25 x 1.6mm and aluminium wall angle of size 25 x 25 x 1.8mm fixed to walll hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire .complete all as sepcified and directed by Engr-In-Charge.

S & F Anodised aluminium snap grid frame work for false ceiling incl all as specified of grid size 605 X 605mm. Incl Hanger 4 mm dia GI wire ( up to 1200 mm length) adjusting level fixed with roof slab/purlin etc all as specified and as directed..

Supply and fix flat iron clamp for posts and struts in fencing including cutting tops to shape as directed. drilling holes, notching for wire, etc; flat iron fillets (for securing chain-link fencing etc) and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed .

Supply only chain link MS Galvanised fencing any size or type complete all as specified and as directed .

Fixing only chain link fencing including line wires , any mesh , size and type to any type of standards , rails , straining bolts etc including provision of binding wire complete all as specified and as directed.

S & F Powder Coated Aluminium anodized frame work for Partation /door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified and as directed.

S/F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design, including either hooks and hinges or steel Wheels for Sliding door fitting to be prepared and also fastening conforming to Fe 410-0 or 310-0 complete all as specified and as directed.

S&F Mild Steel plain black sheet 1.0 mm thick in wall clading in steel gate and similar work cut to size and fixed with screw/rivit to steel rframe with 40 mm lap joint complete all as specified and as directed.

S&F anodied aluminium sliding window shutter , without sash bars aluminium sections weighing 0.55 kg/m including necessary joining cleats ,glazing clips rubber packing anodised aluminium snap beading ,screws,anodised aluminium fitting such as roller, Locking arrangement and suitable handle complete all as specified and as directed.

S & F aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as spd and directed.

Supply and fix pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick (base metal thickness) of any colour having tensile strength of 550 Mpa as in roof covering, fixed with using hot dip galvanised, self drilling and self tapping screws complete all as specified and as directed.

Supply and fix pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with using hot dip galvanised, self drilling and self tapping screws complete all as specified and as directed.

S&F 6mm thick corrugates sheets in roof fixed with 'J' type or cranked bolts (used to fix Non Asbestos) complete all as specified and as directed by Engineer-in-Charge

M & L for providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions. 60 x 60cm in size fixed with staples on snap grid and preparing surface, applying two coats of OBD over a coat of primer. complete all as sepcified and directed by Engr-In-Charge.

S & F prelaminated particle board 9mm thick interior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws complete all as specified

S & F 4mm thick non asbestos fibre cement buildings boards fixed Anodised aluminium snap grid frame work in ceiling complete all as specified and as directed..

M&L perforated particle board/tiles 12 mm thick for insulation and accoustic purposes, 60 x 60cm in size fixed with nails to timber frame work or with staples on snap grid complete all as sepcified and directed by Engr-In-Charge.

M&L in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc completle all as specified and as directed.

M&L cement concrete 100mm thick type B- 2, 1:2:4 (40mm graded stone aggregate) as in floor finishing cement concrete and surface even and smooth without using extra cement .

Material and labour for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in subbase of floor complete all as specified and as directed.

M&L for 75mm thick PCC type C2 1:3:6 (40mm graded stone aggregate) as in path/plinth protection etc laid in pannels including finished the surface smooth and even without using extra cement complete all as specified & directed.

Material and Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness of M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 30cmx30cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified and as directed.

Material and labour for PCC coloured chequared cement concrete tile of size 20 cm X 20 cm X 25 mm thick as in floor , set , jointed and pointed in neat cement slurry with grey cement and pigment , laid over 20 mm thick screed bed with CM 1:6 complete all as specified and as directed .

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in sub floors and finishing even and rough to receive the top floor finishes complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified and as directed.

M&L for Vitrified Ceremic tiles light shade 10 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 450X350x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick packing coat in cement mortar 1:6 complete all as specified & directed.

Rounding to edges of stone slabs one edge such as in steps, cooking platform etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in skirting set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified & directed.

M&L forming 38mm wide construction joints Glass dividing strips, 3 mm thick complete

M&L for glazed ceramic coloured/designed tiles of 1st quality of 350 x 250x 7mm/450 x 350 x 7mm mm thick on vertical surfaces on dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) for Urinal Partitions fixed to wall including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. all as specified and directed

M & L for 18-20 mm thick granite (of any type) machine cut in skirting/dado / steps laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type in step risers complete all as directed by Engr in charge.

Material and labour for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick works in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for rendering 15mm thick in cement mortar (1:4) on brick work or concrete surfaces and surfaces finished even and fair without using extra cement complete all as specified and as directed

M&L for Rendering 5 mm thick on ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster on brick /stone wall surface including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed .

M&L rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat.

Material and labour preparation of new plastered surface for applying two coats of cement based paint over coat of alkali resistant primerr complete all as specified and as directed .

M&L for Prepartion of new plastered surfaces on wall applying two coats of oil bound distemper over a coat of primer including two coats of wall care putty complete all as specified and as directed.

M&L for Prepartion of old plastered surfaces on wall applying one coat of oil bound distemper complete all as specified and directed.

M&L for Preparation of new plastered surfaces of walls and applying three coats of white wash l complete all as specified and as directed.

M&L perpartion of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L perpartion of old plaster surfaces of walls and applying one coat of white wash on g complete all as specified and as directed.

M&L preparation of New surfaces of walls f and apply two coats of colour wash over a coat of white wash complete all as specified and as directed.

M&L Preparing of plastered or unplastered old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Material and Labour on preparation of new steel surface exc 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed .

Material and Labour new preparation new steel surface applying two coats of Synthetic enamel paint over a coat of primer on n.exc 10 cm width or girth complete all as specified and as directed .

Supply and fix in repair PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor complete all as specified and as directed.

Supply and fix in repair PVC(SWR) pipe 75 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor complete all as specified and as directed.

Supply and fix in repair 110 mm bore UPVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) bend , any radius complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed.

Material and labour for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed .

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix in repair 15 mm bore Bib cock , cast copper alloy , chromium plated , screwed down , screwed for iron pipe all as specified and as directed

S&F in repairs GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls complete all as specified and as directed.

S&F in repairs GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls complete all as specified and as directed.

S&F in repair Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe etc. complete all as specified and as directed.

S&F in Repairs Plastic water closet seat cover, white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device (Make : Hindware/Jaquar)complete all as specified and directed.

S&F in repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,32 mm CP waste coupling , PVC connection pipe 450mm long and 15mm dia pillar tap complete all as specified and directed.

M&L for chromium plated wall mixer with bend for over head shower system with all accessories complete all as specified and as directed.

S&F in Repairs bathroom cabinet with door (size 400mm x 500 mm) fitted with looking mirror Make : Cat No 554 of Prayag or equivalent of Polytuf / Hindware complete all as specified and directed.

S&F CP angle valves cast copper alloy,fancy type,with long shank and cup, bore15mm, fixed in repairs.

S&F in repairs brass chromium plated health faucets complete all as specified and directed. (Make : Hindware/Jaquar)

S&F in repairs brass Choromium plated shower rose with or without swivel joints 125mm size includingfixing to steel pipe or union complete all as specified and as directed.

Supply and fixing of soap-dish chromium plated (Approximate size 160x160x90mm) complete all as specified and as directed.

S&F corner shelf of PTMT fixed with and including chromium plated brass screws and wooden and plastic clit

S&F 75 mm PVC (SWR) bends any redius with access door complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 500 lts (cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, complete all as specified and directed.

S&F Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete all as specified and directed.

S&F of 16 mm bore cpvc pipes SDR 13.5 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed

S&F of 20 mm bore cpvc pipes SDR 13.5 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed

S & F in repair vitreous china bowl urinal full stall type,white with grating and union for discharge pipe including 32 mm (LDPE Pipe)waste pipe, waste pipe 1 m length , complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and as directed

S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified

S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type of branded as specified and directed.'

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S & F of 15mm dia Stop valves, cast copper alloy fancy type, chromium plated with long shank and cup (concealed type), screwed down,high pressure with crutch orbutterfly handle, screwed both ends for ironpipe or for unions and fixed complete all as specified and as directed.

S&F grating doom 150 mm dia of PTMT in repairs complete all as specified and directed.

S & F in repair Toilet paper holder, vitreous China, box type fixed to walls with chromium plated (CP) brass screws complete all as specified and directed

S&F in repair vitreous china wash basin, white, flat back size 600 x 480mm including 01 Nos cast copper alloy 15mm CP pillar tap, 01 Nos 32mm waste coupling,waste pipe and pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F bib tap 15 mm bore, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Demolition of cement concrete (un reinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and directed.

Dismantling of stone slabs ,tiles of any description and thickness laid bedded and jointed in any mortar as in floors or aproans.

M & L for Point wiring in surface conduit with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS TYPE1100 Volts grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS, duly painted with red oxide metal primer including fixing / grouting sunken/ surface as per site requirement covered with 3 mm thick laminated sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators all as specified for One light point controlled by one, one way switch 5A, SP

S & F switch piano type single pole one way flush type 5 Amps, 230 volts.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.

S & F Security Lights of 1x36 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge.

M & L bracket made out of GI pipe of 40 to 50mm dia medium grade not less than 1.2 mtr long and fixed on walls with 2 Nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and directed by Engg-in-Charge

ATUL ENTERPRISES

M/S V PRATAP REDDY

Himagiri Constructions

M/S DIVIJA BUILDERS

SREE KIRAN ENGINEERS

BEEGEE DESIGN SYSTEMS

NARAYANA CONSTRUCTIONS