PROVN OF DRAINAGE LINE IN BIRBAL ENCLAVE BLOCK NO 36 OF SINGNALS RECORDS AND FROM BLDG NO ET98 OF DEPOT REGT AND SPL REPAIR RENOVATION OF TIOLET AT KV CMM UND

Amount

Surface dressing not exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches nexec 1.5m wide and not exec 1.5m in depth for foundation etc or for shaft well, manhole, sewage line etc nexc 10 Sqm on plan and nexc 1.5m depth and getting out in soft /loose soil complete all as specified and directed.

M&L for hard core of gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surfaces of broken stone or boulder complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L PCC (1:3:6) type C-1 (20mm graded aggregate) as in kerbs/coping, haunching, benching and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

Returning, filling in, incl spreading, leveling, watering and well ramming in layers nexc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5m above the starting point all as specified and directed.

M&L for three coats of white wash (lime) on newly plastered surfaces on wall including preparation of new plastered surfaces complete all as specified and directed.

S & F mild steel frame work such as grills, grating framed guard bar with ends of bars shouldered and / or riveted or forged into spikes and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thick ness, M-35 Grade with Grey cement and using coloured pigment laid over and including 50mm thick sand cushioning complete all as specified.

M&L 100 mm thick PCC (1:4:8) type D-2 (40mm graded stone aggregate) as in sub base over paver block complete all as specified and directed.

M&L Precast cement concrete blocks type B1 1:2:4 (20mm graded stone agg) in road side edging etc (size 300mm x 300 mm x 150 mm) with and including necessary excavation, use & waste of form work for plain fair faces of concrete, including setting in CM 1:4 with joints pointed flush as the work proceeds and over incl zibra patren painting complete as specified and directed.

M & L PCC 1:4:8 Type D-2 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L PCC 1:2:4 Type B0 (12.50 mm graded aggregate) as in coping complete all as specified and directed.

M&L extra forming fair finished drain or channel 30cm inner girth incl form moulds / mitered stoped ends etc complete as specified and directed.

M&L for providing precast cement concrete 1:2:4 ty B1 (20mm stone agg) as in cover slab (any type) and similar work round/square or rectangular in shape and set in CM 1:4 complete all as specified and directed.

S & F tor steel or TMT bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including M.S wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Demolition of brick masonary built in cement mortar all as specified and directed.

M&L for old size Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified & directed.

M&L for old size Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified & directed.

M&L plastering in CM (1:6) 10mm thick on brick masonry walls and finished surface even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for ground floors and pavings n exc 15 cm thickness (below or above ground level).

Taking down cement plaster of any thickness from wall, chajja etc including racking out joints, hacking key, scrubbing down with water etc complete all as specified and directed

M & L glazed ceramic coloured tiles in vertical surface of wall 350 x 250x7mm/ 450x350x7mm thick laid over & including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.

M & L non skid ceramic coloured/designer tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed.

M & L 25mm thick cement concrete type B-1 1:2:4 using 20mm graded stone aggregate complete all as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) & removing from site complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) & removing from site complete all as specified and directed.

S & F Solid PVC Single door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core supplying & fixing in frame at site as per specification & drawing and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete as specified and directed.

S & F mild steel frame work such as grills, grating framed guard bar with ends of bars shouldered and / or riveted and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S & F figered glass, pin headed type in squares 3 mm thick not exc 0.50 Sqm in each panes and glazing with oil putty etc complete all as specified and directed.

S & F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed.

S & F aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.

S & F extruded aluminum alloy handles, fabricated type, anodized 150 mm long complete all as specified and directed.

S & F Butt hinges, medium weight, cold rolled mild steel and fixed 100 mm long complete all as specified and directed.

S&F in repairs vitreous China wash basin, white, flat back, size 580x450mm excluding taps, chain and plug and porcelain stopper but including brackets, waste pipe complete all specified and directed

S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repairs 15mm dia bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

-do- as item No 43 but 20 mm complete all as specified and directed.

S&F in repairs 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

-Do- as per item No 45 but 20mm bore complete all as specified and directed

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, excluding flushing cistern, flush pipe etc but including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel as fixed.

S& F in repair Vitreous china squatting pan, 'Orissa pattern’, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete and making good to floor complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, pull or push type including brackets complete all as specified and directed .

S&F in repairs 15 mm dia stop valves/angle cock, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repairs PVC (SWR) floor trap75mm, with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.

M&L in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L in repairs PVC (SWR) "P" trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

M&L in repairs PVC (SWR) "S" trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrom primer, complete all as specified and directed.

M & L preparing plastered / unplastered new surfaces of walls and applying two coats of Oil bond distemper over a coad of wall care putty of 2mm on walls as specified and directed by Engr-in-Charge.

M & L preparing plastered/ unplastered new surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm long complete all as specified and directed.

S&F Granite (of any type) stone 18-20mm thick machine cut, in 12mm thick cement mortar 1:3 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing laid over and including cutting and fixing of WHB complete all as specified in Engr in Charge.

S&F in repairs Stainless Steel Pipe 35 mm dia and fixed in wall with bracket and fixing arrangement all as directed by Engineer in charge .

S&F in repairs brass chromium plated overhead shower with arm and flange complete in repairs. Make PRAYAG Cat No BS-76 or equivalent of series in MAKE JAQUAR/ HINDWARE all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, 60cm long between flanges Make PRAYAG Cat No BA-01 or equivalent of series in MAKE JAQUAR/ HINDWARE all as specified and directed.

Schedule of credit amount of Rs. 31,255.00 to be deducted during AOC

AROOP ENTERPRISES

RAVINDRA ELECTRICAL

M/S CHETAN PRAKASH GOYAL

GHANI CONSTRUCTION

LAL SINGH & SONS

ISHWAR CONSTRUCTION COMPANY

Goodluck Enterprises

G S CONTRUCTIONS

M/S BHATIA CONSTRUCTIONS