REPAIR REPLACEMENT TO FALSE CEILING WALL PANELING WOODEN FLOORING JOINERY AND MISC BR WORKS TO BLDG OF SECTOR B UNDER AGE BR II OF GE 865 EWS

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ), complete all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ), complete all as specified and directed by Engineer-in Charge.

Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including supply and fixing of necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 105 mm x 60 mm, including one shop coat of red oxide zinc chrome primer, including bottom of each chowkat to be welded with and including 25 x 3 mm thick flat iron projecting 10 cm on either side and back filling to chowkats with PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregates after applying and including one coat of black paint to prevent from corrosion complete all as specified and as directed by Engr-in-Charge.

30 mm thick flush shutters, solid core construction, with block board core and plywood face pannels and one face is covered with decorative face veneer with 4mm thick teak wood beading all around the edges to match, complete all as specified and directed by Engineer-in charge.

M&L 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints, supplied and fixed plain fillets, square, rectangular or triangular in section clean swan, secured with nails or brads complete all as specified.

Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. Note: Sheet glass shall be measured and paid seperately under relevant item of this BOQ

Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed. Note: wire cloth shall be measured and paid seperately under relevant item of this BOQ

S&F for factory made 35mm thick 2nd class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed by Engineer-in-Charge.

S&F for factory made 35mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (b), fixed to chowkhat all as specified and as directed by Engineer-in-Charge.

Factory made 35mm thick IInd Class Hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-Charge.

Mild Steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in hold fast, bed blcok and like complete all as specified and directed by Engr-in-Charge.

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Plain Sheet glass 3.00 mm thick, ordinary quality and glazing with wooden beads, in squares not exceeding 0.5 Sq. mm in each pane, complete, complete all as specified and as directed.

Preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint on new steel surfaces including preparation of new steel surface to receive paint over a coat of red oxide primer after applying a treatment complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed

S&F powder coating for aluminium anodised window openable fixed type/sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass/wire mesh fixed with rubber gasket. The aluminium member of shutter is 65x40mm along aluminium hanlde & tower bolt etc complete in all as specified and as directed.

S&F powder coating aluminium anodized grills powder coated with 6x5mm aluminium section having square gap of 100mm thick with fixing rails of channels 12-15mm complete all as directed

S&F powder coating for aluminium anodized door/partly paneled and partly glazed with 4.5mm thick plain glass sheet/wire mesh and 12mm particle board interior grade both side laminated and aluminium section weight not less than 0.55 kg/RM with self closing hydraulic door closer & floor srping etc with complete all fitting all as specified and directed.

S&F for Aluminium alloy, anodised, sliding door bolt, ISI Marked, 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 200 mm long, complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 100 mm long, complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and directed.

S & F drapery rod 25 mm dia with PVC pipe over MS conduit including curtain rings suitable for 25 mm dia pipe & side cups with brackets including fixing arrangements with drilling holes etc complete of approved quality and colour, fixed in repairs, complete all as specified and directed.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as directed by Engr-in-Charge.

Taking down shutters of any description area not exceeding 1 Sqm each, complete all as directed by Engr-in-Charge.

S&F Floor door stopper 140mm long (length of cover plate) of alluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in repairs, complete all as specified and as directed.

Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, fixed in repairs, complete all as specified and dirceted. MAKE: GODREJ/DROMA INDIA/DYANA/EVEREST

Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and dirceted. MAKE: GODREJ/DROMA INDIA/DYANA/EVEREST

Taking down wooden shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm, easing and adjusting and refixing the same in same opening complete all as specified and as directed bye Enginner-in-Charge.

Taking down wooden shutters of any description not exceeding 1.00 sqm, easing and adjusting and refixing the same in same opening complete all as specified and as directed bye Enginner-in-Charge.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 200 mm long, fixed in repairs, complete all as specified and directed.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 100 mm long, fixed in repairs, complete all as specified and directed.

S&F for Aluminium alloy, anodised, sliding door bolt, ISI Marked, 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, fixed in repairs, complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 100 mm size, ISI marked, fixed in repairs, complete all as specified and directed by Engineer-in- Charge.

Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 75 mm size, ISI marked, fixed in repairs, complete all as specified and directed by Engineer-in- Charge.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized, fixed in repairs, complete all as specified and as directed.

S&F venation blind vertical type level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement tixed to wall, fixed in repairs, completed all as sspecified & directed.

Resecuring without taking down frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm including replacing rubber neoprene packing, screws, putty and securing hinges except replacement of inserts as in aluminium doors all as specified and as directed.Note:- Supply only hinges and inserts as required shall be measured and paid separately.

Resecuring without taking down frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm and not exceeding 4.0 sqm including replacing rubber neoprene packing, screws and securing hinges / pivot set except replacement of inserts as in aluminium doors all as specified and as directed.Note:- Supply only hinges and inserts as required shall be measured and paid separately.

Taking down cement plaster of any description on brick or stone walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water remove dust, debries/rubbish etc, complete all as specified and as directed.

M&L for 15mm thick rendering in CM (1:6) on fair faces of brick work or stone masonary work, including finishing the surfaces with even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper in any tint, over a coat of primer over (with alkali-resistant priming paint) and including 2 mm thick coat of Birla white wall care putty, as on wall, etc all as per all as specified and directed by Engr-in-Charge.

Plain Sheet glass 10 to 12 mm thick, superior quality including cutting holes moulding and sides as required, in squares exceeding 0.5 Sq. mm in each pane, including hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.

Tinted/shaded/coloured Sheet glass 10 to 12 mm thick, superior quality including cutting holes moulding and sides as required, in squares exceeding 0.5 Sq. mm in each pane, including hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.

M&L for 9mm thick ply wood (No of plys 05) BWR, type BB as in ceiling panelling fixed with screws to timber frame work, including dismantling wall and ceiling boards/ply wood, complete all as specified and directed.

M&L for 7-9mm thick fine fissured teglar RH 99 Tringular and acoustic purpose of size 600x600x15mm thick fixed with dash through fastner bolt of approved quality 04 Nos for per sqm including necessary cutting securing and making good, including dismantling wall and ceiling boards/ply wood, complete all as specified and directed. Make: Armstrong/Everest/Gyproc

M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions, including taking down old wooden flooring complete all as spfd and directed.Make and shade of tiles be all as approved. Make : Action tesa/Kajaria/Armstrong

Provn of wooden panelling on vertical surface of wall using following specifications including taking down old wooden panelling complete all as specified and directed:-

S&F 2nd class hard wood wooden gutties of size 25mmx25mmx 200mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 complete all as specified and directed.

S&F horizontal runner 2nd class soft wood (Kali at 120 c/c of sextional area exc. 13 Sqm and n. exc 25 Sqm clean sawn treated with two coats of creoste oil mixed with good quality pesticide for antitermite treatment

S&F 1st class soft wood (Deodar) boarding 12mm to 15mm thick as in wall panelling planed one side, wrought and other side clean sawn and applying two coats of good quality varnish on plain surfaces over a coat of primer mixed with good quality pesticide for antitermite treatment on the other side and fixed with screws/nails on wooden runners.

S&F 1st class soft wood (Deodar) decorative breading 40mm wide on top surface of wall panelling including two coats of varnish.

9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in walls, including dismantling wall and ceiling boards, complete all as specified and as directed by Engr-in-Charge.

9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in ceiling, including dismantling wall and ceiling boards, complete all as specified and as directed by Engr-in-Charge.

M&L for 6mm thick ply wood (No of plys 05) BWR, type BB as in ceiling panelling fixed with screws to timber frame work, including dismantling wall and ceiling boards, complete all as specified and directed.

M&L for 2nd class soft wood clean sawn as in scantling fixed with nails, framed and fixed including dismantling timber scantling 40 sqcm and over in section, in any position as in framed work complete all as specified and directed.complete all as specified and directed.

M&L for 2nd class softwood clean sawn plain fillets, square,rectangular or triangular in section, clean sawn, secured with nails or brads exceeding 13 Sqcm and n.exc 25 Sqcm in section including dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in framed work complete all as specified and directed.

PADMA ENTERPRISES

SONAM TUNDUP

M/S BALI CONSTRUCTIONS

M.S Sharma Enterprises

HIMANSHU TRADERS

Mehar Enterprises