Special Repair to Bldg No P 108 in Tech Area Provn of security Gate in Offrs Mess Spl Repair to BSO YARD Bldg No T 5 Store and Provn of cover shed for Geyser in Bldg No P 196 P 197of Md Accn and OR Md Accn at Mil Stn Dappar under GE (P) Dappar

Amount

SCHEDULE 'A' SEC -I : Spl Repairs to Bldg No P-108

Demolition of cement concrete (unreinforced in ground floor n exc 15 cm thickness (below or above ground level) all as specified and directed by Engr -in-Charge

Demolition of cement concrete (reinforced) in roofs, floors, beams , chajja and similar suspended work etc. complete all as specified and directed by Engr-in-Charge.

M&L providing cement concrete 1:2:4 type B-I using (20mm graded mechanically crushed stone aggregate) in slab supported on wall, beams and columns,chajjas, facia and the like complete all as specified and directed by Engr-in-Charge

M&L cement concrete 1:2:4 type B2 using (40mm graded mechanically crushed stone aggregate) 75 mm thick in as in path and hardstanding complete all as specified and directed by Engr-in-Charge

M&L cement concrete 1:3:6 type C1 using (40mm graded mechanically crushed stone aggregate) 75mm thick, as in plinth protection complete all as specified and directed by Engr-in-Charge.

M & L Formwork to soffits of suspended flat slabs such as roof slabs, landing and similar work not exceediing 200mm thick horizontal or sloping, fair finished surfaces complete all as specified and directed by Engr-in-Charge.

M & L Formwork to edges of concrete flat, treads, breaks in floors, roofs and similar work exc 10cm but n exc 20cm rough finished surfaces of concrete surfaces complete all as specified and directed by Engr-in-Charge.

M&L Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for roof slab/beams binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-In-Charge.

M&L Mild steel TMT bars 6mm to 8mm dia as in stirrups cut to length bent to shape required including cranking bending spirally for column and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-In-Charge.

Demolition of Brick work or stone/boulder masonry, built in Cement Mortar or cement lime mortar incl all quions, arches, pillars etc. complete all as specified and directed by Engr-In-Charge.

M&L Brick work using sub grade "B" brick straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-In-Charge.

Taking down chowkhat or frame not exc 1.5 Sqm each with shutters (without taking of shutter from the frames ) and removing from site complete all as specified and directed by Engr-In-Charge.

Taking down chowkhat or frame exc 1.5 but n exc 4 Sqm each with shutters (without taking of shutter from the frames) and removing from site complete all as specified and directed by Engr-In-Charge.

M&L preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described and treated with tar or coal tar black paint complete all as specified and directed by Engr-In-Charge.

S&F box type steel window side hung double shutters glazed and gauzed (fly proofing) including hinges with steel handle and steel peg stay , complete including guard bars all as shown on CE CHZ Drg No TD-219 sheet No 1/3 to 3/3 complete all as specified and directed by Engr-in-charge ( (i) Both glazed & gauged shutters are measured as on unit (ii) The unit rate quoted by the Contractor shall deemed to be inclusive of one shop coat of red oxide primer).

S&F steel ventilator top hung double shutters (fly proof) including hinges with steel handle and steel peg stay, complete including guard bars complete all as specified and directed by Engr-in-Charge. (The unit rate quoted by the Contractor shall deemed to be inclusive of one shop coat of red oxide primer).

S&F MS Butt hinges medium weight of size 75 mm stainless steel complete all as specified and directed by Engr-In-Charge.

S & F Aluminium anodised tower bolt 100mm long of extruded section complete fixed with steel screws complete all as specified and directed by Engr-In-Charge.

S & F aluminum anodised handle cast type 100mm long of extruded section complete fixed with steel screws complete all as specified and directed by Engr-In-Charge.

S & F 250 mm long aluminum alloy, anodised, sliding door bolt of extruded with hasp and staple (bolt type) and fixing clips of sheet, section and fixing bolts of and fixed complete all as specified and directed by Engr-In-Charge.

S & F GI wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture complete with beads etc. for door shutter/window shutter of any size/ type/thickness complete all as specified and directed by Engr-In-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engr-In-Charge.

M&L for screed bed or bedding layer of 15 mm thick cement mortar (1:6) for laying floor finishes etc. complete all as specified and directed by Engr-In-Charge.

M&L for rendering of 10 mm thick cement mortar (1:4) for bedding to vertical wall tile in skirting and dado complete all as specified and directed by Engr-In-Charge.

M&L non skid coloured ceramic tiles 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-In-Charge. Make : Somany/Orient/ Johnson.

M&L glazed ceramic coloured tiles in vertical wall surface 350x250x6/7mm set and jointed in neat cement slurry and pointed in colour cement to match all as specified and directed by Engr-In-Charge. Make : Somany/Orient/Johnsdon

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade coloured, polished, area of each tiles not exceeding 0.36 sqm, as in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. Make : Somany/Orient/Johnsdon

Dismantling wall and ceiling boards or insulation boards any thickness including cover fillets complete all as specified and directed by Engr-In-Charge.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-In-Charge. Make : Rajashree/ SINTEX/DURA PLAST/ FENESTA

S&F 5mm PVC sheet fillet 35mm width for wall panelling including fixing to walls to make PVC frame as per specification and drawing complete all as specified and directed by Engr-In-Charge. Make : Rajashree/ SINTEX/DURA PLAST/ FENESTA

S&F Aluminium anodised snap grid framework of 605 x 605mm size for false ceiling 'using aluminum tee having web 35 mm, flange 25 mm, thickness 2 mm thick and angle of size 35mmx25mmx2mm thick. The main and cross tee shall be joined at junction/ crossing with anodized alumimum angle bracket of size 15 mm x 15 mm x 1.5 mm' complete all as specified and directed by Engr-In-Charge.

S&F Hangers 6mm dia GI (Upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasterners 12.5mm dia and 40mm long complete all as specified and directed by Engr-In-Charge.

M&L 6mm thick non asbestos fiber cement building boards decorative type of any design as approved, fixed to GI/Aluminum frame work with screws as in ceiling. (GI/Aluminum frame work will be measured and paid separately) complete all as specified and directed by Engr-In-Charge. Make : ARMSTRONG/ LAFARGE/ EVEREST.

Taking up or down 15mm steel tubing & connection including cleaning for refixing or removal from site complete all as specified and directed by Engr-In-Charge.

Taking up or down 20mm steel tubing & connection including cleaning for refixing or removal from site complete all as specified and directed by Engr-In-Charge.

S & F GI tubing medium grade 15 mm bore with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor to the entire satisfaction of Engineer-in-Charge. Make : TATA/ JINDAL/ SWASTIK.

S & F GI tubing medium grade 20 mm bore with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor to the entire satisfaction of Engineer-in-Charge. Make : TATA/ JINDAL/ SWASTIK.

S&F bib taps cast copper alloy C P with crutch or butterfly handle screwed down, screws for iron pipe for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed by Engr-In-Charge. Make4: PARKO/ GEM/ ESS ESS/ JALANGI.

S & F fancy type pillar tap of 15 mm bore , cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-In-Charge. Make: PARKO/ GEM/ ESS ESS/ JALANGI.

S&F of stop valves, for 15 mm bore cast copper alloy fancy type,long shank and cup (concealed type) chromium plated, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed by Engr-In-Charge. ake: PARKO/ GEM/ ESS ESS/ JALANGI.

Cutting chases, pining in, making good to facings for brick wall where require and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good , cutting not exc 10 cm girth complete all as specified and directed by Engr-In-Charge.

M & L for 18/19 MM thick veneered particle Boards interior grade, solid core, general purpose type with face veneers of type BB fixed with screws to timber frame complete all as specified and directed by Engr-In-Charge. Make : KIT PLY/ NOVA PAN/ GREEN PLY/ DURA BOARD.

Taking down cement plaster from brick walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed by Engr-In-Charge.

M&L for rendering 15mm thick cement plaster to fair faces or other than fair faces of brick wall in CM 1:4 mixing with suitable water proofing admixture finished even and fair surface complete all as specified and directed by Engr-In-Charge.

M&L for rendering 10mm thick cement plaster to fair faces or other than fair faces of brick wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge.

M&L 5 mm thk cement plaster on fair faces of concrete surface finished even & smooth without using extra cement in cement mortar 1:3 on ceiling complete all as specified and directed by Engr-in-charge.

S& F in repair vitreous china wash hand basin white flat back of size 550 x 400 mm including brackets and CP waste coupling and making all the connections complete all as specified and directed by Engr-In-Charge.Make : Cera/Parryware/Hindware

Supply & fix in repairs Vitreous China European type WC seat complete with seat cover making all the connections to make the system fully functional and leak proof to the entire satisfaction of Engineer-in-Charge. Make : CERA/ PARRYWARE/ HIND WARE.

S & F in repairs low level PVC flushing cistern 10 litre capacity with inlet, ball valve, float valve and handle including brackets, joint between flush pipe & socket of WC pan and connecting 32mm dia PVC pipe of polythene complete all as specified and directed by Engineer -In-Charge. Make:Cera/Parryware/Hindware

S&F of PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engr-In-Charge. Make : PARYAG/ DIPLAST.

Demolition & breaking up drain pipes 150 mm dia (salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed by Engr-In-Charge.

S&F for PVC (SWR) pipe 110mm dia ,single socketed,in any length,with rubber ring complete all as specified and directed by Engr-In-Charge.

S&F for PVC (SWR) pipe,single socketed,in any length,with rubber ring complete all as specified and directed by Engr-In-Charge.

S&F PVC (SWR) 110 mm Bore Bends any radius complete all as specified and directed by Engr-In-Charge.

S&F PVC (SWR) 75mm Bore Bends any radius complete all as specified and directed by Engr-In-Charge.

S&F Waste coupling of PTMT 32 mm dia (half or full threaded) . (Minimum weight 32mm-45gms complete all as specified and directed by Engr-In-Charge.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement work for 75 mm dia out let complete all as specified and directed by Engr-In-Charge.

S&F for health fauchet (jet type) Chromium plated including connecting pipe complete fixed to 15mm bore dia flexible water pipes 1m long complete all as specified and directed by Engr-In-Charge. Make: Hindware/ ESS ESS/ GEM/ PARKO.

Supply Soap dish, vitreous China white, approximate size 160x 160x90mm and fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-In-Charge.

S & F anodised aluminium powder coated frame work for doors windows, with one or more rebates includng jointing cleat for fixing etc all as per design given by Engineer-in-Charge complete all as specified and directed by Engr-in-Charge. Make : HINDAL CO/ JINDAL/ INDAL.

S&F anodised powder coated aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats clips, ruber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading screws and glazing etc all as per design given by Engineer-in-Charge complete all as specified and directed by Engr-in-Charge. Make : HINDAL CO/ JINDAL/ INDAL.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to floor all as specified and directed by Engineer -In-Charge

S&F anodised powder coated aluminium window shutter side hung type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips rubber packing, anodised aluminium snap beading screws anodised aluminium fitting such as peg stays 150mm long (1No) hinges type B-21 100mm long (2 No) suitable handle (1 No) all as per design given by Engineer-in-Charge complete all as specified and directed by Engr-in-Charge. Make : HINDAL CO/ JINDAL/ INDAL.

M & L for 12 MM thick particle Boards exterior grade, prelaminated both sides with decorative choice fixed with screws to timber frame work complete all as specfied and directed by Engr-inCharge. Make : KITPLY/ NOVAPAN/ GREEN PLY/ DURA BOARD.

S& F for 4mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specfied and directed by Engr-inCharge.

S&F in repair Towel rail 450 mm long of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats.(Minimum weight 170 gms) complete all as specfied and directed by Engr-inCharge.

S& F toilet paper holder, vitreous china, coloured fixed to walls with chromium plated (CP) brass screws in repairs. complete all as specified and directed by Engr-in-Charge.

M&L preparation of old painted surfaces of steel applying two coats of synthetic enamel paint any description, over 10 cm in width or girth not otherwise described complete all as specfied and directed by Engr-inCharge.

M & L for preparation of new plastered surfaces of wall and applying two coats of Oilbound distemper over one coat of alkali resistant primer complete all as specfied and directed by Engr-inCharge.

M & L for preparation of old plastered surfaces of wall and applying two coats of distemper Oil emulsion complete all as specfied and directed by Engr-inCharge.

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specfied and directed by Engr-inCharge.

M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over primer complete all as specfied and directed by Engr-inCharge.

M & L for preparation of Old plastered surfaces of wall and applying one coat of cement base paint complete all as specfied and directed by Engr-inCharge.

Supply only Integral waterproofing compound (ISI marked) complete all as specfied and directed by Engr-inCharge.

M&L RCC/PCC 1:1-1/2:3 type A0 using 12.5mm graded mechanically crushed stone aggregate of thickness exceeding 15mm and not exceeding 40mm in repairs of RCC beams, parapets, fascia, chajjas, column etc. including setting coat 5mm thick rendering in CM 1:3 and necessary form work with including preparation of peeled off/worn out portions complete all as specified and directed by Engr-in-Charge.

S&F plain fillet as in 2nd class harde wood square rectungular in section wrought secured with screws sectional area exc 6 but n.exc 13 Sqcm

S&F 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finished

S&F continuous (piano) hinges of suitable width of flaps 30mm (when open) interior grade particle board, mild steel, bright finish or electrogalvanised

SCHEDULE 'A' SEC -II : E/M Works (Internal Electrication)

Taking down carefully any type of point wiring and description and removing the unserviceable material out of site including separating the serviceable fitting/ fixtures of light / socket / switch etc for reuse carefully complete all as specified and directed by Engr -in-Charge.

Material and labour point wiring complete with 1.5 sqmm (nominal area) PVC insulated PVC unsheathed Multistranded copper conductor with color code single core cable 1100 volts grade (FRLSH) ISI marked drawn through and including heavy duty non metallic PVC conduit ISI marked not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all fittings and pressed steel terminal boxes suitable to fix modular switches , sockets, regulators etc incl PVC insulated and unsheathed single core copper conductor cable of size 1.5 sq mm green in colour (FRLSH) as in earth continuity conductor connected to common earth dolly and all metal parts of fittings complete all as specified and directed by Engr-in-Charge for the following:- Note:- Switches , sockets, ceiling rose, regulators etc shell be measured and paid separately. (a) One Light/fan/bell point controlled by one switch). Quoted rate is deemed to be inclusive of cost of cutting chases in wall for in corporating pvc conduit and cost of making good to existing wall with CM 1:4 not exceeding 10 Cm girth painting same so as to match the existing wall.

(b) Description all as per Ser item No 83 here-in-before one 3 pin socket outlet 5 Amp on Independent board.

(c) Description all as per Ser item No 83 here-in-before 3 Pin 5 Amp on same board .

Description all as per Ser item No 83 here-in-before but size of cable 2.5 sqmm with 2.5 sqmm earth wire complete all as specified and directed by Engr-in-Charge

Material and labour in replacement sub main wiring with 02 runs of single core PVC insulated unsheathed Multi stranded copper conductor cable FRLSH of size 4.0 sqmm 1100V grade drawing in and including heavy duty non metallic 25 mm dia PVC conduit medium grade ISI marked including accessories in wall, roof etc including one No of. 4 sqmm PVC insulated, unsheathed single core copper conductor cable green in colour as in earth dolly including cutting chases for concealed conduit wiring etc and making good cutting not exceeding 10 cm girth to match existing surface complete all as specified and directed by Engr-in-Charge. Note :- 2 Nos 4.0 sqmm copper cable, 01 No 4 sqmm. Earth copper conductor and conduit shall be measured as one unit.

Supply and fixing Bell push switch modular 6A 1 module 230 Volts complete all as specified and directed by Engr-in-Charge. Make : Hager Insysta/Legrand Asteor/Schenider Zencelo

M & L for bell electric AC 230 volts ding dong type bell including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge. Make : Hager Insysta/Legrand Asteor/Schenider Zencelo

M&L switch modular flush type 6 amp 230 volts single pole complete all as specified and directed by Engr-in-Charge. Make : Hager Insysta/Legrand Asteor/Schenider Zencelo

M&L modular socket multipurpose 6 amps 3 pin complete all as specified and directed by Engr-in-Charge. Make : Hager Insysta/Legrand Asteor/Schenider Zencelo

M&L switch modular type 16 amp 230 volts single pole complete all as specified and directed by Engr-in-Charge. Make : Hager Insysta/Legrand Asteor/Schenider Zencelo

M&L modular type socket multipurpose 6/16 amps 5 pin complete all as specified and directed by Engr-in-Charge. Make : Hager Insysta/Legrand Asteor/Schenider Zencelo

Supply and fixing module Metal flush box 4 module with cover frame plates for fixing modular switches and sockets, regulators, complete all as specified and directed by Engr-in-Charge. Make : Hager Insysta/Legrand Asteor/Schenider Zencelo

Supply and fixing module Metal flush box 6 module with cover frame plates for fixing modular switches and sockets, regulators, complete all as specified and directed by Engr-in-Charge. Make : Hager Insysta/Legrand Asteor/Schenider Zencelo

Supply and fixing module Metal flush box 8 module with cover frame plates for fixing modular switches and sockets, regulators, complete all as specified and directed by Engr-in-Charge. Make : Hager Insysta/Legrand Asteor/Schenider Zencelo

Supply and fixing Modular Angle type lamp holder insulated body with back plate for batten fitting complete all as specified and directed by Engr-in-Charge. Make : Anchor, Cat No : 33958 or equivalent in Havells/SSK.

Supply and fixing LED lamp 9watt ISI marked complete all as specified and directed by Engr-in-Charge. make: Philips/Havells/Crompton.

Supply and fixing LED tube light fitting, Decorative type LED tube 1x20watt , 230 V, complete all as specified and as directed by Engr-in-Charge. Make : Havells or equivalent to Philips/Bajaj/ Crompton/.

Supply and fixing sleek LED mirror light 10watt, high output diffuser complete all as specified and directed by Engr-in-Charge. Make : Crompton (Cat Pt No. LCL-14-CDL) or equivalent to Philips/Havells/ Wipro/.

S & F recess Mounting LED luminaries of size 2x2" 36 watt made out CRCA power coated housing with glare free symmetric light distribution diffuser 7 with in built occupancy PIR sensor all as per Havells Make Cat No : VENUSNOHE2X2R34WLED84OPIRSENSOR or equivalent in Philips/Bajaj/Wipro

Supply and fixing ceiling rose Bakelite, 3 terminals with base plate ISI marked complete all as specified and directed by Engr-in-Charge. Make : Anchor/ Havells/ SSK.

Supply and fixing step type fan regulator modular type, 120W - 2 module complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB SP 06-32 Amps, 'B' curve 240 V ISI marked complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB single pole and neutral, 40 Amps, 'B' curve, 240 V ISI marked complete all as specified and directed by Engr-in-Charge.

M&L MCB SPN 63 Amps, 240 volts 10 KA B Curve complete all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosure for pre wired distribution board double door, powder coated 8 way , 415volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed.

Supply and fix sheet steel enlusure (factory made) enclosure with metal clad plug and socket single pole 240 volts 50 Hz 20 Amps controled by and including 1 No SP MCB 32 Amps Curve Complete all as specified and directed by Engr-in-Charge. Make : Legrand/ABB/Schenider/L&T

Supply and fixing ceiling fan 1200mm sweep energy saver excel 5 star rating complete all as directed by Engr-in-charge. Make Bajaj/ Havells/ Crompton. Note : Cost of cutting & Making good to wall is deemed to be included in the quoted rate.

Supply and fixing exhaust fan with grills of sweep 250mm single phase 250V AC, provision of 2 way PVC connector, copper bunched flexible cable 1 sqmm twin twisted PVC insulated cable from ceiling rose/ connector to fan all as specified and directed. Make-Bajaj/Crompton/Havells.

Material & Labour Earthing complete by using GI wire as earthing lead and MS galvanized earth plate of size 60 cm x 60 cm x 6.0 mm as earth electrode buried directly in ground vertically in pit of depth not less than 2.25 meter below the ground with top edge of the earth plate at a depth of less than 1.5 mtr below ground level surounded from all sides with mixture of charcoal dust and common salt in15 cm thick alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron connected iron connected to main switch board or main control board protected in 20 mm dia GI pipe light grade all as shown in electrical plate No 3 of SSR 1991. Pt I and including necessary excavation. and earth work. The rate also include testing, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type CI 40 mm thick RCC(1:2:4) type B-1 cover reinforced with 8 mm thick TMT bars @ 15 cm centre to centre and CI frame etc. complete all as specfied and as directed by Engr-in-Charge

SCHEDULE 'A' SEC -III : Provn of Security Gate in Offr Mess at 33 FAD

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m deep and getting out in loft/loose soil all as specification and directed by Engr-in-Charge.

Cement concrete in foundations, Type D-2, 1:4:8 (using 40 mm graded mechanically crushed stone aggregate) fitting and mass concrete all as specification and directed by Engr-in-Charge.

Material & Labour brickwork with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 all as specification and directed by Engr-in-Charge.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 250 mm thick each layer, in soft/loose soil complete all as specification and directed by Engr-in-Charge.

Removing of surplus soil/ excavated, material to a distance exc 50 mtr and depositing where directed complete all as specification and directed by Engr-in-Charge.

Material and labour for cement concrete 1:2:4 type B-1 (using mechanically crushed stone aggregate 20 mm graded) for coping, lacing courses, lintels upto 1:5 m clear span, cills etc complete all as specification and directed by Engr-in-Charge.

Supply and fixing for mild steel framed work of Fe-410-W (Gde-E-250) quality A as in gates made of angle and other sections with gusset plate, rails, braces etc complete including drilling and welding for fixing of steel sheets or other covering of doors, gates etc to be prepared for hanging or sliding with and including hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides etc) and hanging also fastening and fixing, complete all as specification and directed by Engr-in-Charge.

Rendering 15mm thick cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing fair and even complete all as specification and directed by Engineer-in Charge.

Supply & Fixing tubes light grade galvanised 40mm bore with fitting laid in brick work for cable protection for lightening complete all as specification and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement paint complete all as specification and directed by Engr-in-Charge.

Applying two coat of Exterior Emulsion paint over a coat of alkali resistant primer paint including necessary p0repration of surface of wall, columns and beam etc. complete all as specification and directed by Engr-in-Charge.

M&L for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specification and directed by Engr-in-Charge.

SCHEDULE 'A' SEC -IV : Spl Repair to BSO YARD (Bldg No T-5) Store of GE (P) Dappar

Demolition of cement concrete (unreinforced in ground floor n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L 75 mm thick plain Cement concrete1:2:4(20mm graded aggregate) type B1 laid in alternate panel as in floor and finished even and smooth using extra cement complete all as specified and as directed.

M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B' complete all as specified and as directed.

75 mm thick Cement concrete type C1, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing and plinth protection.

Dismantling of corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and as directed

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L type or J type or cranked hook bolts and washers in roofs etc all as specified and as directed.

Demolition of Brick work or stone/boulder masonry, built in Cement Mortar or cement lime mortar incl all quions, arches, pillars etc complete all as specified and directed by Engr-in-Charge.

Material and Labour Brick work using sub grade "B" brick straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge

Taking down cement plaster from brick walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed by Engr-In-Charge

M&L for rendering 10mm thick cement plaster to fair faces or other than fair faces of brick wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge

M & L for preparation of new plastered surfaces of wall and applying two coats of white wash on plastered surface complete all as specified and directed by Engr-In-Charge

SCHEDULE 'A' SEC -V : Spl Repair to BSO YARD (Bldg No T-5) Store of GE (P) Dappar E/M items

Taking down carefully Copper/aluminium point wiring (light/fan/ Bell/Socket/Power) complete including (fittings such as switches, ceiling roses, pendants, regulators, sockets) and making good distrubed surfaces of walls. Floors etc to match with the existing concealed including disconnection of ceiling/exhaust fan connection, complete all as specifed and directed

Taking out existing sub main wiring of any description and size including earth wire incld wooden battens/ conduits/quities from stone/brick masonry walls, roofs, floors, etc. all as directed by Engr-In- Charge.

M & L sub main wiring with single core PVC insulated unsheathed multistanded FRLSH copper conductor cable 1100V grade drawing in including heavy duty metalic steel conduit ISI marked incl accessories not less than 25 mm in wall, roof etc including PVC insulated, unsheathed single core copper condutor cable green in colour as in earth dolly complete all as specified and directed for the following size of cable a ) 2x 4sqmm (line conductor) 1x 2.5sq mm (earth conductor).

All as per Item No. 140 above but with 2 runs of 1.5 sqmm, single core FRLSH PVC insulated unsheathed multistranded copper conductor cable and one run of 1.5 sqmm, single core FRLSH PVC insulated unsheathed multistranded copper conductor cable as earth wire.

Supply and fixing LED energy saving enviornmental friendly & robust Highbay/ Medium bay LED IP65 luminaire with high efficancy 80 wattt with high efficiency Cat pat No BayBRITESAUCERHBP80WLED757560DTOLTG of Havells or equivalent in Bajaj/Crompton all as specified and directed by Engr in charge.

Supply and fixing MCB SP 06-32 Amps, 240 V 'C' Curve ISI marked.

Supply and fixing MCB SPN 40 Amps, 240 V 'C' Curve ISI marked.

Supply and fixing MCB distribution board 8 way double door with metalic cover having transparant window and detachable gland plate with bus bar , neutral link , earth link ( wihtout MCBs ) Make Legrand/ABB/Schenider/Seimen/Hager

Supply,laying,jointing,testing and commissoning in pip/renches/ducts/under floor/under road cable LT,XLPE insulated,screened,PVC bedded,galvanised steel or wire armoured,electric power cable (heavy duty) with aluminium conductor as per IS7098(part-II),1.1KV ' grade completede all as specified and directed for 2 Core x 10 Sqmm mm area. In cluding taking down.

Excavation in trenches in soft/loose soil n exc 1.5m wide andn. Exc1.5m deep and getting out includingforming bottom surfaces to required level or slope for taking out embeded cables,brick/pcc protective tiles and relaying new/old cable complete all specified and all as directed by engineer incharge.

M&L sand cushioningng (drysand) to under ground cable for cable protection provided with layers 8cm deep before laying and 15 cm after laying the cable complete all as specified and directed. Note :- Punned thickness will be measured only.

M&L for bricks old size 23x11.5x7.5 cm for protection of cable including reuse of existing 30% serviceable bricks all as specified and directed by Engr-in-Charge.

Removal of surplus excavated soil to a distance exc 50 m but not exc in 100 m and deposited where directed at a level n'exc 50 m above the starting point complete all as specified and directed.

Returning filling in soft/ loose soil in trenches including spreading, leveling watering and well ramming in 25mm thick layer complete all as specified and as specified.

Earthing complete by using GI wire as earthing lead and MS galvanized earth plate of size 60 cm x 60 cm x 6mm as earth electrode surrounded by charcoal and salt, burried directly in ground vertically in pit of depth not less than 2.25meter below the ground with top edge of the earth plate at a depth of not less than 1.5 meter below ground level surounded from all sides with mixure of charcoal dust and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of bolts , nuts, checknuts and washers of galvanised iron.connected to main switch board or main control board all as shown in electical plate No 5 of SSR -1991 Pt I and including necessary exc. and earth work. The rate also include testing. 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type C1 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc. Note :-(a) The unit rate include for protection pipe and GI wire 4 mm dia upto 7.5 mtr above ground level iron top of earth plate earth wire upto 3 mtr above ground level. (b) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of length of watering pipe bends etc shall be deemed included in the rates.

Supply and fix in replacement Sheet metal enclosure with socket plug top and MCB SPN cap 32 Amps with a 2 pin, earth plug and socket complete all as specified and directed by Engineer-in-Charge. Make : Legrand/ABB/Schenider/Hager

Provn of cover shed for Geyser in Bldg No P-196 & P-197of Md Accn and OR Md Accn

S&F Plates Fe-410W(GdeE-250) Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated

S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long of dia neck n exc 12mm

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for applying two coats of synthetic enamel paint steel surfaces of any description, over 10cm in width or girth,not otherwise described

Supreet Associates

SONY ENTERPRISES

M/S Mahal Enterprises