Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹4,000
Closing Date
5 Oct 2026, 6:00 pm
Driller-in-Charge. BMSD(D)
Office of the Driller-in-Charge. Bankura Mechanical Sub-Division (Drilling). P.H.E. Dte. Ailakundi, PO Kenduadihi, Bankura 722102
Replacement of Pre and Post Chlorination pump sets at WTP of MKT New under Khatra, Hirbandh, Ranibandh surface Water Based Piped Water Supply Scheme at Khatra Block, Dist-Bankura under Bankura Mechanical Division, P.H.E. Dte.
2026_PHED_5073822_4
WBPHED/BMSD(D)/NIeT- 01 OF 2026-2027
Open Tender
MECHANICAL
Item Rate
20 days
Ailakundi
Please refer Tender documents.
5 documents required · 5 mandatory
₹4,000
Yes
24 Sept 2026
24 Sept 2026
7 Oct 2026
24 Sept 2026
5 Oct 2026
24 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply delivery at site of self priming HC pump for pre chlorination , Having Dischage Capacity of 25 LPM - 80 LPM at 72 mtr -20 mtr, Head. with suitable base frame Having following specification recomended for 415 V, 3 Ph, 50 Hz. A.C. Supply 1450 rpm , 2 HP rating with suitable Pump Casing , intermediate casing, Discharge Cover, Shaft, Bearing Bracket , Casing wear ring, impeller Having minimum pump efficiency of -62%, motor efficiency- 85% (Make- “BE” make H.C. Self Priming pump or equivalant as per existing ) (Model-AO 3120K or equivalent) | 2 | each | -148 | - |
| 2 | Supply delivery at site of self priming HC pump for post chlorination , Having Dischage Capacity of 2700 GPH - 1000 GPH at 40 feet -225 feet, Head. with suitable base frame Having following specification recomended for 415 V, 3 Ph, 50 Hz. A.C. Supply 1450 rpm , 5 HP rating with suitable Pump Casing , intermediate casing, Discharge Cover, Shaft, Bearing Bracket , Casing wear ring, impeller Having minimum pump efficiency of -62%, motor efficiency- 85% (Make- “BE” make H.C. Self Priming pump or Civcon equivalant as per existing ) (Model-AS 4020BB or equivalent) | 2 | each | -147 | - |
| 3 | Fitting fixing of above Supplied bare motor by withdrawling the old damage HC pumps from the base frame by cutting the old damaged base frame and disconnecting the hydraulic line and refitting the new base frame with suitable cement concrete work as per requirment and refitting the pumps with existing motors including supply of all necessaries materials i.e-non metallic full face supper quality rubber gasket, Glang Packing, M.S Nut Bolt & Washer etc. after withdrawing the existing pump with Testing & checking the above repaired pumping machinery one by one by the 4 hr continuous run up to satisfaction of E.I.C as per direction of E.I.C | 1 | LS | -146 | - |
| 4 | Add: 18% GST | 1 | Item | 9 | ₹9 |
| 5 | Add: 1% Cess | 1 | Item | 10 | ₹10 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 28.02 MB
Tendernotice_2.pdf
PDF • 1.11 MB
BOQ_5162080.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .