Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹72.5 Cr
EMD Value
₹85.5 L
Closing Date
17 Oct 2023, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Belagavi Urban Development Authority
PRASAN
DEVELOPMENT OF RESIDENTIAL LAYOUT SCHEME 61 IN KANBARGI, BELAGAVI
BGMUDA/2023-24/OW/WORK_INDENT7
BGMUDA/2023-24/OW/WORK_INDENT7
Open
Other Works
Two Tender Document System(Two Cover)
BGMUDA Commissioner Office Belagavi
5 documents required · 5 mandatory
The tenderer should have satisfactorily completed as a prime Contractor at least one Similar Work of Residential/Industrial Layout development works which includes Roads, drains, Electrification , water supply & UGD works of value not less than Rs. 42.75crores during the last five financial years from 2018-19 to 2022-23
The intending bidder / firm/ company should have executed in any one financial year, the following minimum quantities of work in the last five years satisfactorily. (2018-19 to 2022-23) 1)Earthwork exavation/Embankment/subgrade 93036 Cum 2) GSB/WMM/WBM 37562 Cum 3)DBM/BM/BC/SDBC 6572 Cum 4) PCC/RCC/All type of concrete 12842 Cum 4) Reinforcement steel/Structural steel/Fabrication 565 Tonne
The Tenderer or his identified sub-contractor should possess required valid electrical license for executing electrification works and should have executed similar electrical layout works totaling Rs : 8.93 Crores
The Tenderer or his identified sub-contractor should possess valid license for executing water supply works and should have executed similar water supply works consisting of with minimum 5 Lakh liter capacity OHT totaling Rs: 2.58 Crores
The Tenderer or his identified sub-contractor should possess valid license for executing sanitary engineering works /UGD and should have executed similar sanitary engineering works/UGD works with minimum 0.5 MLD STP totaling Rs: 4.04 Crores
Each Tenderer should further demonstrate: Availability by owning/ Lease/ Hire basis the following key and critical equipment for this work: For Lease/ Hire basis- relevant documents (RC /Sale deed/Invoice or commitment agreements etc., shall be scanned and uploaded (Minimum 50% of the required machinery should be owned by the Tenderer. Remaining 50% of the required machinery may be owned / procured on Lease basis / Hire basis.1) Hydralic Exacavator 4 Nos 2) 40-60TPH capacity HMP 1No (Own) 3) Tipper 8 Nos 4) Static Vibrator Road Roller 2 Nos 5) Asphalt paver finisher 1 No (Own) 6) Vibratory Roller 2 Nos 7) Concrete Transit Mixer 4 Nos 8) Self loading Concrete Mixer 4 Nos 9) Motor Grader 2 Nos
To qualify for award of this contract, each tenderer in his name should have in the last five financial years i..e 2018-19 to 2023 a) achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.85.51 crores Note 1Turnover certificate duly certified by chartered accountant shall be uploaded 2 financial turnover of previous years will be given a weightage of 10% per year to bring them to 2023-2024 level rupee price value.
The bidder / firm/ company should furnish details of liquid assets availability or availability of credit facilities of not less than Rs.15.69 crores (usually the equaivalent of the estimated cash flow for 3 months in peak construction period) for the work mentioned above for meeting the required funds in the form of credit lines / letter of credit / certificate from any Nationalized Banks/ Scheduled banks.
Category of Contractor : KPWD Class- I Registered contractors
₹7,500
₹85.5 L
26 Sept 2023
26 Sept 2023
18 Oct 2023
5 Oct 2023
7 Oct 2023
DEVELOPMENT OF RESIDENTIAL LAYOUT SCHEME 61 IN KANBARGI, BELAGAVI
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal to be used or au...
Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all lead and all lifts.
Removal of stumps and roots including backfilling with suitable material to required compaction
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Construction of Embankment by excavating the available approved ravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, ...
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary / demarcation / chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, mu...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 using mecha...
Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom complete as per spec...
Bituminous Macadam Grading - II for traffic 20 MSA Providing and laying Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bi...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Dense Graded Bituminous Macadam Grading - II for traffic 20 MSA Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed...
Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-40, @ 5.4 per cent of mix and filler, t...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for foundatio...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. 600 x 300 x 1...
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces complete as per specifications and as per directions of Engineer-in-charge.
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...
Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete as per specifications and as per directions of Engineer-i...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing & Fixing of CI Cover & Frame 600x600mm complete as per specifications and as per directions of Engineer-in-charge.
Providing sand cement bed with 5% cement with all leads for all materials and lifts machine mixed, laid in layers of 15 cms. Thick and well compacted for foundation including curing cost, cost of all ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Formwork for Drain (Sub structure of CC drain 35%)
Supplying, Fitting and Placing TMT Fe 550 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Form Work 35% for Box culvert
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and constructing vertical /inclined graded filter media using clean, hard graded sand and coarse aggregates from approved source satisfying specified filter creteria in layers of specified t...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all othe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, Fitting and Placing un-coated TMT Fe 550 bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications.
Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 4...
Providing and constructing 450 mm thick dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all ma...
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification
Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for gravity t...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant)
Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant)
Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant)
Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification
Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, cover...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Form work 8% (footing/ pedestral)
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Two seat swing-2.1 mtr
Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Tower slide-2.1 mtr
Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Four seater merry go round
Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Supply and installation of play equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Four seater merry go round
Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Double standing twister
Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Stainless steel air walker
Supply and installation of Gym equipment including all lead and lift etc, complete as per the direction of Engineer incharge of the work
Outdoor leg press
Cutting road surface for pipeline trenches and disposing off the excavated stuff with all lead and lift as directed including barricading, danger ighting etc., in the following classifications. Cutti...
Ordinary/soft rock (without requiring blasting) Depth upto 1.50 m
Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with:
Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveyiing to work site, rolling and lowering into trenches, laying true to line, level and perfect ...
Supplying and fixing of DI specials with ISI mark confoming to IS 9523
/ 2000 suitable for jointing 100 mm to 600 mm dia DI pipes coated with
rust prevention coatings as below:
A) External co...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All inter...
Scour Valve 150 mm dia PN10
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Supply and fabrication TOR /TMT steel bars of all size for reinforcement of R.C.C works including conveying steel to workspot with all lead including cleaning, strengthening or bending, fabricating,...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Tack coat ...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Providing and applying primer coat with SS1 grade Bituminous Emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.90 kg/m2 using mechan...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Cement Concrete Grade M-15 & M-20 (RA-16)
Prestressed / Reinforced cement concrete grade M-20 & above
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
For cenetring and shuttering
Supply and Labour charges for fabricating Mild Steel or TMT Steel bars of all sizes for reinforcement for RCC works, including conveying steel to work spot with all lead, cleaning, straightening, cutt...
Supply, Installation, Commissioning and Testing of GPRS + GSM based EMI flow meters on the Bulk water connections ranging from 100 mm to 300mm. The electromagnetic meters should comprise of the pecif...
Bulkflow meter chamber (Sub estimate enclosed)
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Pressure control valve
Construction of Valve chamber (1.5X1.5m)
Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with: (RA-3)
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All inter...
Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All inter...
Supply and fixing of single chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All inter...
Supply and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M12x130 hexagon head A2-70 for service connection valves, design der...
Clearing and grubbing land including uprooting rank vegetable grass, bushes, shrubs, saplings and trees upto 300mm girth by manual means, in areas of light jungle, removal of stumps, disposal of unser...
In ordinary/soft rock without blasting Depth upto 1.5 m.
Depth upto 1.5 m. 1.5 to 3 Mtr. Depth
In Hard Rock ( requiring blasting) Depth upto 1.5 m. 1.5 to 3 Mtr. Depth
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Providing and laying in position Reinforced cement concrete for RCC Shafts. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Supply and Labour charges for fabricating mild steel or torsteel bars (Fe 550) of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, str...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends: 200X90
Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends: 250X90
Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends: 300X90
Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends: 350X90
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including
applying a primi...
Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...
Providing and fixing factory made ISI marked steel glazed doors,
windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...
Manufacturing, providing, transporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-73...
Supplying and fixing of DI specials with ISI mark confoming to IS 9523 / 2000 suitable for jointing 100 mm to 600 mm dia DI pipes coated with rust prevention coatings as below:
A) External coati...
Construction of RCC valve chambers of size (1.5x1.5x1.8)
Providing house connection with excavation in all types of soils cutting with machine cutter without damaging the other utilities and supplying and laying of MDPE pipe (PE80) -PN 12.5 manufactured in ...
15 mm dia for connection pipe pipe length beyond 2 Mtr for every one mtr or part therof ( 3 Mtr
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...
Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...
gral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and ...
gral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and ...
Specials 5percent
Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...
Providing PVC-U INDIVIDUAL U.G.D House service connection
(which shall be laid from inside the customer property ) which includes: a) Supply of PVC-U pipe (b) providing and fixing of 315 mm dia the P...
do- in Ordinary rock (Not requiring blasting)
Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...
Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...
Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...
Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...
Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...
Earth work excavation for pipe line trenches (except building works) including depositing on bank with all lead and lifts etc complete. including danger lighting and using sight rails and boning rods ...
Providing and laying cement concrete 1:1.5:3 proportion for foundation (Screed layer) with 20 mm and down size of approved gradation hard broken granite, trap basalt or with any other approved hard a...
Providing and laying vibrated M30 design mix for RCC works with 20mm and down size of approved gradation hard brocken granite, trap, basalt or any other approved hard aggregate, including, cost and co...
Providing and laying vibrated M30 design mix for RCC work with 20 mm and down size of approved gradation hard broken granite, basalt, trap or any other approved hard aggregate including cost and conve...
Providing TMT or TOR steel bars of all sizes for reinforcement for RCC works including conveying steel to workspot with all lead including cleaning, straightening, bemding, fabricating, placing in pos...
Supplying and fixing of Stainless steel Manual bar screen size 900 mm x 1600 mm, channel depth 1150 mm, channel width - 1000 mm (approximately), bar size 50 x 10 mm, bar spacing 10 mm, inclination 60 ...
Providing and fixing MS grill work using MS flats or MS square rods or combination of MS flats and square rods as per approved design, drawing including cutting steel sections and welding the same to ...
Providing and fixing of Plastic foot steps
Earthwork excavation for foundations of structures by Mechanical means as per drawing and technical specifications, including setting out, Construction of shoring, strutting, barricading, danger light...
do- in Hard Rock by chistelling
do- in Hard Rock by chistelling
Providing and laying cement concrete 1:1.5:3 proportion for foundation (Screed layer) with 20 mm and down size of approved gradation hard broken granite, trap basalt or with any other approved hard a...
Providing and laying vibrated M30 design mix for RCC work with 20 mm and down size of approved gradation hard broken granite, basalt, trap or any other approved hard aggregate including cost and conve...
Design, Engineering, Manufacturing, Supply, Supervision of Moving Bed Biofilm Reactor Based STP for
Having Capacity of 1 MLD except civil work.
Design, Engineering, Manufacturing, Supply, Supervision of Moving Bed Biofilm Reactor Based STP for
Having Capacity of 1 MLD except civil work. Macadam
Providing and laying in position plain cement concrete for levelling course
for all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete of M25
Design Mix for raft, footings, beams below ground level in GLSR
Foundation works. The granite/trap/basalt crushed graded coarse
Providing and laying in position Reinforced cement concrete M30 Design Mix for vertical side walls, effluent channel baffle walls, etc.The,granite/trap/basalt crushed graded coarse aggregates and fine...
Providing and laying in position Reinforced cement concrete of M30 Design Mix for top dome. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machin...
Supply and fabrication TOR /TMT steel bars of all size for reinforcement of R.C.C works including conveying steel to workspot with all lead including cleaning, strengthening or bending, fabricating,...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Providing and fixing 200mm dia duck foot bend for inlet pipe
Supplying, laying of CI flanged pipe true to line / hoisting of CI flanged pipe in position and aligning to correct plumb including cost of jointing material conveying to work spot with all lead and l...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia.with body, bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge f...
Construction of RCC valve chamber (Separate estimate enclosed)
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ram- ming after watering with a lead upto 50 m , and lift upto 1...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Providing openwell submerssible pumpset along with accessories
11kv Class 3X40 Sq.mm XLPE UG Cable
Straight through jointing kits HS Type suitable for 3X400 Sq.mm Cable
Cable termination kit outdoor HS Type suitable for 3X400 Sq.mm
Cable termination kit indoor HS Type suitable for 3X400 Sq.mm
Cable Covering tiles 250X125X40mm or 125X125X4
RCC Hume pipe, 2000mm long, 150mm dia
Collars for RCC Hume pipe
GI pipe, 150mm dia for drain crossing, cable raising
Route & joint indicating stones
Laying of Cable Trench
Making of Straight through joints
Making of cable terminations
covering the cable with tiles
Spreading sand and forming with sand round the cable
Laying of RCC Hume pipes
Laying of GI pipe
Laying of route & joint indicating stones
Transporting HT cable from store to work spot
RMU (5way), One In comer + Three Breakers +one out going (2OD +3 VL), 350 MVA, 630A
Bed conceting with CC 1:2:4 as per labour charges Item No.25.9
Construction of Stone masonary was per labour charges item No. 28.10
Supplying of frame of MS channel 100X50mm and MS angle 40X40X5mm welding etc., complete.
Rod type earthing with 40 mm dia 3 mtrs long MS rod as per specification & drawing (enclosed)
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,
Providing chain link fencing 50 mm size of 8 guage complete as per SR 22 - Item No - 38
Earth Excavation for R.M.U. Foundation depositing of earth on bank up to a lead of 50 mtrs and with a lift up to 1.5 mtrs
Labour charges for Fixing foundation frame of MS channel 100X50mm and MS angle 40X40X5mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
11kV Class 3X95 Sq.mm XLPE Cable
Cable termination kit Out door / In door HS Type for 95 Sq.mm
Straight through Jointing Kit suitable for 95sqmm XLPE UG Cable
GI Pipe, 150 mm dia
Laying of cable in trench
Spreading Sand and forming with Sand round the cable
Spun pole 11.0 Mtr Long
Single Pole Transformer Structure Kit for 100kVA
HT Single Top Support with bolts, nuts & washers
11kV Pin Insulator with pins
Rabbit ACSR Conductor for jumps
Alkathene Tube 19mm Dia and in coils of 30 Mtrs
a) Base concreting 1:4:8, 1000x1000x150mm
b) Pole concreting 1:2:4, 1000x1000x2500 mm
c) Coping 1:2:4 (as per actuals)
GI Wire 10 SWG
Guy Wire 7/10 SWG
PVC Pipe 150 mm Dia
PVC Bend 150 mm Dia
PVC Pipe 25mm Dia
Earthing materials pipe type for grounding as per
Drawing No. BESCOM/GM/CP/15 & 34/Dt:
a) LT Distribution Box for 100kVA with 2Nos of MCCB
b) LT Wiring 100KVA SC * 2
11kV Solid Core Type HG Fuse Unit
11kV, 200Amps, Polymer GOS
c) LT Metering box with CTs and necessary wiring for housing ETV Meter (Please see CDS-42)
d) LT Electronic Tri-Vector Meter 5A, Class-
0.5/1.0 accuracy
11kV Lightning Arester, Metal Oxide, 9kV, 5kA polymer
PVC Insulation Tape in rolls of 10 mtrs
Horizontal Cross Arms
Caution/Danger Board as per Drawing No. BESCOM/GM/CP/40/Dt: 24.10.07
Anti Climbing Device (12mtrs/1Kg GI Barbed
Fencing for DTCs
95 Sq.mm, 3.5 core XLPE UG - 1Run
25Sq.mm, 3.5Core for St. lt.
Epoxy Straight through jointing kits suitable for 1.1 kV class LT UG Cables Size upto 185 Sq.mm, 3.5 core
Epoxy Terminating kit (pothead) suitable for 1.1 kV class LT UG Cables 95 Sq.mm, 3.5 core
Route and joint indicating stones
LT Feeder Piller Box with Poreclain Rewireable Cutout and & 2Nos(1for Feeder piller and another for Busbar) of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 8 Way (Dwg No. BES...
Providing Earthing for Feeder Piller Box
Laying of cable in trench 25Sqmm
Erection of LT Feeder piller box including necessary civil works like soil excavation & concreting etc. complete
Providing Earthing for Feeder Piller Box
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with ...
Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with ...
Fabricating, supplying and erection of… Mtrs long hot dip Galvanized Conical Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includin...
Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc…. Complete a) Single Arm Bracket with 1500mm Sta...
Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc…. Complete a) Double Arm Bracket with 1500mm Sta...
Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm...
Fixing charges of Post top/gate/garden fitting/LED on the existing CI/GI or any other pipe using required size of reducer, wiring using suitable wires.
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing, fabricating and placing in position reinforcement steel for RCC works including cost of all materials, machinery,labour, cleaning, straightening, cutting,bending,hooking lapping,welding whe...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and Virgin PVC insulation sheathed suitable for workin...
Providing & Fixing of J bolts, nuts & washers of 16mm Dia 0.8m Long
Providing automatic street light control panel consists of 40 Amps 4 pole MCB 1no, 40 Amps 4 pole power contactor, 2 nos of Push buttons, 1 no 0 to 100 Amps ammeter, 0 to 600 volts voltmeter, 40 Amps ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw -4 BUDA.docx
Tender Document • 1.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .