installing furniture for Auditorium

Providing and fixing in position Broadloom Carpet one hundred percent Solution Dyed Nylon of approved make and size as per manufacturers specification in approved pattern and as directed by Engineer in Charge The carpet shall be Cut Pile Carpet with minimum pile weight of nine hundred grams per square meter and pile height seven point five millimeters plus minus five percent with total height nine point five millimeters The carpet shall have one hundred sixty three thousand eight hundred tufts per square meter with tufting gauge one over eight inch Primary backing shall be woven Total weight shall be one thousand nine hundred grams per square meter plus minus ten percent Carpet shall be fixed in approved pattern using synthetic adhesive approved make Work shall be as per approved architectural drawing and Engineer in Charge Carpet shall be durable uniform and resistant to wear and color fading Edges and seams shall be securely fixed and neatly finished Contractor shall ensure proper alignment and pattern match Installation shall prevent wrinkling buckling or uneven surfaces All materials and workmanship shall conform to industry standards and best practices

Providing and fixing in position Auditorium Chairs with shared handles in colour of choice. Back fifteen millimeters bent plywood size four hundred seventy by one hundred thirty by seven hundred twenty millimeters. Seat nineteen millimeters plywood size four hundred eighty by four hundred ninety by nineteen millimeters with PP moulded seat. Push Back metal sheet mechanism size four hundred fifty by four hundred forty by one point six millimeters. Two triangular blocks size three hundred by three hundred millimeters with four nine millimeters holes. Longitudinal tubes forty by twenty by four hundred ninety millimeters two tubes each and four tubes twenty by six millimeters Riveted or Welded three hundred fifty millimeters long. Seat Back Bracket Riveted or Welded size two hundred by sixty by one point six millimeters. Seat Bracket with stopper cup five rivets size one hundred seventy by three hundred forty by one point five millimeters two pairs. Rollers withstand two hundred degrees twenty two millimeters width thirty eight millimeters diameter riveted and welded on metal sheet thirty by one hundred twenty millimeters. Metal stand three hundred by three hundred by three millimeters with three supports twenty by forty by two hundred seventy millimeters. Side panels twelve millimeters plywood with fabric and foam. Polyurethane Foam density fifty plus minus five and forty eight plus minus five kilograms per cubic meter. Fabric one hundred percent polyester with five or seven point five millimeters foam. All materials approved, durable, resistant to wear. Installation as per layout directed by Engineer in Charge.

Supplying fixing and placing of Seminar Hall Chair as per reference image of size four hundred millimeters width by four hundred fifty millimeters depth by nine hundred fifty millimeters height and direction of Engineer in Charge The chair framework is to be made of forty five millimeters by forty five millimeters Class Two teak wood Kiln seasoned and chemically treated six millimeters thick commercial plywood with fifty millimeters thick foam elastic strap layer of jute etc in seat duly upholstered in fabric or leather of approved shade and quality Seasoned second class teak wood finished with two or more coats of melamine polish will be used for the outer structure wherever visible as per image attached This includes side rest arms back rest sides corners and legs Side hand rest back rests legs and corners to be made as shown in the image attached The foam used shall be Flexi polyurethane foam with a density of not less than forty kilograms per cubic meter All the wood used shall be well seasoned and free from knots and any other defects The fabric or leather used shall have a basic cost not less than Rupees nine hundred per running meter The colour and texture of fabric or leather shall be as approved by Engineer in Charge

Supplying fixing and placing of second class Teak wood Centre table of size six hundred millimeters by four hundred fifty millimeters as per line diagrams and image attached as per direction of Engineer in Charge The table top will be of twenty two millimeters thickness and the pillar legs will be of eighty seven point five millimeters by eighty seven point five millimeters The complete table would be duly finished in melamine polish Marine glue will be used for furniture joints

Supplying and placing in position podium of size seven hundred eighty to eight hundred millimeters length by six hundred eighty to seven hundred millimeters depth by one thousand one hundred eighty to one thousand two hundred millimeters height The top made out of eighteen millimeters thick prelam MDF board or nineteen millimeters thick commercial board or plywood with two millimeters thick PVC edge banding with approved post lamination The side panel shelves and modesty panel also made out of eighteen millimeters thick prelam MDF board or nineteen millimeters thick commercial board or plywood with two millimeters thick PVC edge banding with approved post lamination Podium shall be with provision for wire management system

Executive Revolving Chair Imported Recliner High Back Chair Type of backrest support Backrest backrest symmetrical lumbar support Overall Chair Height one thousand one hundred twenty five millimeters to one thousand two hundred twenty five millimeters Backrest Height six hundred thirty millimeters to seven hundred millimeters Backrest Width four hundred eighty millimeters to five hundred millimeters Seat Height five hundred millimeters plus minus fifteen millimeters Seat Width five hundred millimeters to five hundred twenty millimeters Thickness of M S Plate Joining the under structure with Seat zero point three millimeters to zero point five millimeters Wheel base made of MS covered with chrome polish Thickness of Plywood used in Seat plus minus one millimeter fifteen millimeters to eighteen millimeters Thickness of Plywood used in Backrest plus minus one millimeter fifteen millimeters to eighteen millimeters Back size equals High back chair Colour equals as per choice Seat material PU Foam covered with Genuine leatherite Arm Material equals Metal Arms finished with matching leatherite Warranty two Years

Supply and placing of Anti Skid Stair nose on Auditorium stairs in grey color of size forty five to fifty millimeters tread and twenty to twenty five millimeters riser The Stair nose shall be fixed with help of countersunk Screws The screws should be covered with PVC anti Skid rubber of Black Color The Supply and Installation of Anti Skid Stair nose on Auditorium stairs in grey color of size forty five to fifty millimeters tread and twenty to twenty five millimeters riser The Stair nose shall be fixed with help of countersunk Screws The screws should be covered with PVC anti Skid rubber of Black Color