REPAIRS TO JOINERY, ROOF SHEETS, GI AND SANITARY FITTINGS AND MISC B/R WORK OF CERTAIN UNITS OF NAGPUR AREA UNDER GE KAMPTEE

Amount

Taking down chowkat with shutter (Without taking off shutter from frame) area exc 1.50 Sqm but not exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkat with shutter (Without taking off shutter from frame) area not exc 1.50 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, partition etc complete all as specified and directed.

M&L for 18mm thick plywood, grade BWR, type BB fixed with screws to timber frame work with beading as required complete all as specified and directed.

M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters,purlins, etc. under 40 sq cm in section frame work in any position complete complete all as specified and directed.

M&L for second class hard-wood plain fillets square, rectangular or triangular in section exc 13cm and not exc 25 sqcm sectional area, clean sawn, secured with nails or brads in cupboard and similar work etc complete all as specified and directed.

Dismantling timber scantlings 40 sq cm and over in section in any position complete all as specified and directed.

M&L for second class hard-wood clean sawn in scantlings complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in block for hold fast block or similar work and finished the surface with existing and including form work complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F Mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-410-0 or 310-0 complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making hold fast and fixing in concrete 1:3:6 type C-1 including tie bars of 10mm dia and hold fast of flat iron 40 X 5mm all complete confirming to Fe 290 (Gde E-165) complete all as specified and directed.

S&F 35mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12mm thick veneered particle board or 9mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned and chemically pressure treated of any number of panel complete all as specified and directed.

S&F 2nd class hard wood 35mm thickness glazed and skeleton shutters (Factory made), open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board and plywood face panels commercial type both side complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat molded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side complete all as specified and directed.

S&F aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's specifications complete all as specified and directed. Notes: (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 4.0 mm thick tinted sheet glass of approved make and shade/tint Make of Aluminium Sections powder coated: Jindal or equivalent.

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repairs GI water tubing medium grade 15mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing complete all as specified and directed.

S&F in repairs GI water tubing medium grade 20mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed.

S&F in repairs vitreous china squatting pan Orissa pattern 580 X 440mm long with integral foot rest, S or P trap including connection to trap and to flushing pipe etc complete including making good to floor complete all as specified and directed.

S&F in repair 15mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs bowl with cistern for couple WC with PP normal close slim seat cover, Hinges, Fixing accessories and accessories Set, size 395 X 680 X 770mm, P/S Trap-180mm/ 220mm (Essco by Jaquar Cat No AIS-WHT-101751S220 NPPSM/ AIS-WHT-101751P180 NPPSM or equivalent) complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size 36x24x10 Inch complete with fixing arrangement complete all as specified and directed. Make:- Prayag / Hindustan / Nirali / Bluestar/ Shakti

S&F Hand shower (health Faucet) with 1 meter long easy flex tube in chrome finish & wall hook with NRV (back flow Preventer) complete all as specified and directed. Make: Jaquar (Cat No ALE-ESS-593) or equivalent.

S&F in repairs single lever basin mixer without popup waste with 450mm long braided hoses complete all as specified and directed. Make: Essco by Jaquar (Cat No:APR-101011B) or equivalent

S&F in repairs single lever Sink Cock with swinging spout (wall mounted Model) with wall flange complete all as specified and directed. Make: Essco by Jaquar (Cat No:APR-101347N) or equivalent

S&F toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make Jaquar (AEC-1151) or equivalent

S&F in repairs 2 way bib cock with wall fange complete all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101041) or equivalent

S&F in repairs glass shelf 500x60x6mm (with ABS brackets) complete all as specified and directed. Make:- Prayag CAT No.: BEA-47 or equivalent

S&F corner glass shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make: Jaquar (.ACN-CHR-1173) or equivalent

S&F soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make: Essco by Jaquar (AEC-1133) or equivalent

S&F in repair Prayag wall cabinet Mirror (500x400Appx) complete all as specified and directed. Make:- Prayag CAT No. 556 or equivalent

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position and including dismantling of existing water tank and removing from site complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position and including dismantling of existing water tank and removing from site complete all as specified and directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs sheet glass ordinary quality 3mm thick with oil putty in sequence not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane in each pane complete all as specified and directed.

S&F stainless steel auto hinges complete all as specified and directed.

S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F 150mm long aluminum handles, cast type, anodized complete all as specified and directed.

S&F 100mm long brass handles, cast type, polished bright complete all as specified and directed.

S&F anodised aluminium frame for door, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified and directed.

S&F 4.8mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

M&L for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to IS 1161-1979 grade Fe 410W (Gde E-250) quality A complete all as specified and directed.

S&F grills and gratings etc framed angle iron and ms sheets etc and guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and milar work confirming to FE 290 GdeE165 complete all as specified and directed.

S&F wire brush with aluminium section 25mm x 1mm and brooms to fill the gap of floor and door shutter complete all as specified and directed.

S&F in repairs Harrison rails, stainless steel, chromium plated with fixing brackets etc complete all as specified and directed.

S&F in repairs braket brass chromium plated for fixing of Harrison rails, mild steel, chromium plated complete all as specified and directed.

S&F in repairs wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flange complete all as specified and directed. Make: Essco by Jaquar (Cat No: APR-101273) or equivalent

S&F in repairs angular stop cock with wall flange complete all a specified and directed. Make: Essco by Jaquar (APR-101053) or equivalent

S&F in repair overhead shower 80mm dia round shape single flow (ABS body chrome plated with Gray Face Plate) with Rubit cleaning system including shower Arm 240mm long complete all as specified and directed. Make: Essco by Jaquar (Cat No- EOS-5421RB& ALE-536A) or equivalent

S&F in repairs wash hand basin of size 455x355x165mm white including fixing accessories complete all as specified and directed. Make: Essco by Jaquar (Cat No- ECS-WHT-803) or equivalent

S&F in repairs sinks made of stainless steel 1mm thick, for kitchen or laboratory with pIugs including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs bib cock with wall fange complete all as specified and directed. Make: Essco by Jaquar (Cat No:APR-101037) or equivalent

S&F in repair brass CP fancy type 15mm bore pillar cock woth 450mm long Braided hose complete all as specified and directed. Make: Essco by Jaquar (Cat No:APR-101001) or equivalent

S&F in repairs towel rack complete all as specified and directed. Make:- Essco by Jaquar (Cat No:AEC-1181A) or equivalent

S&F in repairs towel ring complete all as specified and directed. Make:- Essco by Jaquar (Cat No:AEC-1121) or equivalent

S&F single towel rail 600mm long, stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make: Essco by Jaquar (AEC-1111) or equivalent

Dismantling wall and ceiling boards (Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as specified and directed.

M&L for 4mm thick for Non Asbestos, fibre reinforced designer cement ceiling board including Gl frame work for seamless ceiling of size 600mm x 600mm comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L for preparation of new steel and iron surfaces not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

Dismantling of unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and directed.

M&L for colored glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm/ 300x 450x 7mm thick set and jointed in neat cement slurry and pointed in white or color cement to match the shade of tile including rendering 10mm thick in cement mortar 1:4 complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.74,905.00]

Meet Road Lines

M/s Rahul Traders

S D WAGHAMSHI

Bidder Name

Meet Road Lines

S D WAGHAMSHI

khushal constructions

M/s Rahul Traders