MTPS I M II CHP I Replacement of wornout wooden steel sleepers layout Tongue rails Stock rails CMS crossings Check rails by newly procured Tongue rails

Amount

Charges for removing of wornout rails, tongue rails, stock rails, fabricated crossings, check rails, sliding chairs, stretcher bars, (Leading and following) gauge tie plate in point & crossings.

Charges for removing of existing damaged wooden sleepers, steel sleepers, rail screws, plate screws, in point & crossings.

Charges for assembling of point & crossings pre-stressed concrete sleepers (64Nos.) tongue rails, stock rails, check rails, cast manganese, steel crossings, manual point box, gauge plate etc., charges for marking, drilling rails, point box base plate etc., and charges for laying of point & crossing sleepers with new rails.

Charges for providing of temporary crane path to cross the railway track lines (The crane must cross 1 or 2 railway track line to reach these point and crossings.

Charges for marking and drilling the rails for fixing the fish plate bolt & nuts.

Charges for devolution of wornout rails, damaged steel / wooden sleepers, CST-9 sleepers, stretcher bars, gauge plate, leading of released point & crossings, wooden/steel sleepers, stock rails, tongue rails, fabricated crossings to road approach area for loading purpose.

Charges for dismantling the existing rails after removing the steel keys, fish plates bolts and nuts in order to provide accessibility for grinding the edges.

Charges for grinding the elongated edges to right angle to provide the expansion gap in between rails.

Charges for Pre-assembling and reversing the grounded rails in to its position fixing the Elastic railclip, fishplates, bolts and nuts etc.

Deep screening the existing ballast to remove the broken / damaged ballast for proper drainage of track line.

Lifting of track lines to the specific limit by through packing.

Ballast hard broken stone 40mm size

Charges for dumping and spreading the ballast to the track.

KR CONTRACTOR (BID ID -1148021)