Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bid | |
| 2 | L2₹38.5 L+₹1.3 L (3.52%)Accepted-AOC | L2 | Accepted-AOC Other than lowest bid | |
| 3 | L3₹39.5 L+₹2.3 L (6.21%)Accepted-AOC | L3 | Accepted-AOC Other than lowest bid |
Tender Value
Refer Docs
EMD Value
₹72,000
Closing Date
18 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS
GE 874 EWS Kupwara
PROVN OF DEFICIENT BATHROOM, TOILET BLOCK, SECURITY LIGHTS AND SPL REPAIR TO RE DEVELOPEMNT OF BORE WELL UNDER AOR OF GE 874 EWS.
2024_MES_657764_1
GE 874/EWS-37/2024-25
Open Tender
Civil Works
Works
120 days
Kupwra
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE 874 EWS
₹72,000
Yes
26 Oct 2024
5 Jun 2024
20 Jul 2024
5 Jun 2024
18 Jul 2024
1 Jul 2024
Amount
Surface excavation n.exc 30 cm deep and average 15cm deep and getting out soft/ loose soil complete all as specified and directed.
Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundation etc in soft/loose soil complete all as specified and directed.
M&L for plain Cement concrete as in foundation, filling & mass concrete type D2 1:4:8 (using 40 mm graded aggregate complete all as specified and directed.
M&L for brick work with sub class 'B' brick straight or curved on plan etc 6 mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Returning and filling I including spreading levelling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.
Removal of excavated materials not exc 50cm and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed.
M&L for mild steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed.
M&L for RCC M-25 Design mix using 20 m graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M-25 Design Mix using 20 mm graded stone aggregate for Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for RCC M-25 design mix using 20 mm graded stone aggregate for beams, cantilevers & lintel beams etc complete all as specified and directed.
M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft Beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete.
M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for Square, Circular rectangular on plan or flat rough finished surfaces of concrete
M&L for use and waste of formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
M&L for 15 mm thick cement plaster in CM 1:4 other than fair faces of brick work or as a screed bed for vertical surfaces of external wall complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work/concrete surfaces in CM 1:6 finishing the surface fair & even complete all as specified and directed.
M&L for mild steel roof trussed (framed) purlins crane gantries rail & fastening and heavy bracket (beam tea angle channel or flat section) including distance pieces cleats of grade FE 410W(e 250) Quality-A etc complete all as specified and directed.
S&F mild steel Plates (plain or chequered)channels, square cut or notched(ordinary and counter sunk)forming holes, without any attachment of grade Fe 410W (Gde[1]E-250)quality-A etc complete all as specified and directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm and n exc15cm long of dia 16-20mm complete all as specified and directed.
M & L for preparation of new steel surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall , fixed with self tapping screws complete all as specified and directed.
S&f Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall , fixed with self tapping screws as specified.
M & L for preparation of newly external plastered surface of wall and applying two coats of cement based paint on wall surfaces over a coat of primer complete all as specified and directed.
M&L Material and labour for preparing the new plastered surfaces of walls up to any height and applying two coats of white wash complete all as specified and directed.
M&L hard core filling under floor, breaking stone or boulder exc 63mm and n. nexc 100mm gauge of sand stone complete all as specified and directed.
M&L for 75 mm thick plinth protection in/Sub base PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed.
M&L for 75mm thick PCC type D-2, 1:4:8 using 40 mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
M&L for coloured glazed ceramic tiles (450X300 mm) x 7mm thick as in vertical surfaces such as skirting, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, set and jointed in neat cement slurry and over 15mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L for Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm and n. exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B1 using 20 mm graded crushed stone aggregate complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification complete all as specified and directed.
S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed.
M&L for second class softwood as in scantling, clean sawn fixed in position with nails, unframed work, complete all as specified and directed.
M & L for plain framed panelled shutter 2nd class soft wood 30mm thick (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 30 mm thick second class soft wood (Kail) complete all as specified and directed.
S&F Galvanized mild steel wire cloth having 0.56mm dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat of zinc chrome primer complete all as specified and directed.
S&F in repair Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane complete all as specified and directed.
S&F Mild steel butt hinge medium weight cold rolled 100mm size
S&F Mild steel butt hinge medium weight cold rolled 75mm size complete all as specified and directed.
S&F Mild steel pressed handle, oval type stove enamelled, black size of handle 150mm complete all as specified and directed.
S&F Mild steel pressed handle, oval type stove enamelled, black size of handle 100mm complete all as specified and directed.
S&F Mild steel tower bolt stove enamelled black 150mm long black with bright bolt and fixed
S&F Mild steel tower bolt stove enamelled black 100mm long black with bright bolt and fixed complete all as specified and directed.
S&F mild steel flat iron as in hold fast complete all as specified and directed.
Mild steel sliding door bolts stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate 200mm long complete all as specified and directed.
S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint including cleaning, dusting of new or previously untreated wood of ply wood base surfaces for wall, door, window, ventilator and ceiling not otherwise described over 10cm width or girth complete all as specified and directed.
S&F tubing galvanized iron medium grade with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm.
All as per Srl. item No. 49 here-in-before but bore of pipe 20mm.
S&F 20mm dia bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with complete all as specified and directed.
M&L for PCC type B-1, 1:2:4 (using 20 mm graded aggregate) aggregate) Chullah hoods; stairways (except spiral staircases) including steps (square or spandrel), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; complete all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for chequered cement concrete tiles (20cmx20cm)x 25mm thick in pathetic set and jointed in neat cement slurry and pointed in cement slurry and pointed in grey pigment to match with 25mm thick screed bed in CM 1:4) complete all as specified and directed.
S&F Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed.
S&F for Vitreous china squatting Pan "Orissa Pattern" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern fixed, complete all as specified and directed.
S&F for Vitreous China wash down water closet pan (pedestal pattern), white with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valve less, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets fixed with 32 mm PTMT Flush pipes to pedestal pan, including Jet Sprey of all joints complete all as specified and directed.
S&F vitreous China bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)
S&F PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets (10 Ltr) capacity fixed complete all as specified and directed.
S&F soap dish, vitreous China white, approximate of size 160x160x90mm complete all as specified and directed.
S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed.
S&F Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions
M & L for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type.
S & F Waste coupling of PTMT (half or full thread ). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB, sink complete all as specified and directed.
S&F bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked).
S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed.
S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed fixed to wall complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified.
M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed.
M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed.
M&L for PVC (SWR) reducer 110/75mm dia complete all as specified and directed.
M&L for 6mm thick plywood (5 Nos of ply) grade BWR type BB fixed with nails to timber frame works, fixed in lining/walls complete all as specified and directed.
M&L for plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 3 sqcm & n exc 6 sqcm, second class soft wood (Kail) clean sawn complete all as specified and directed.
M&L for Lagging on pipe of internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed.
M&L for Lagging on pipe of internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9843 complete all as specified and directed.
M&L for towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. (Minimum weight 190gms)
M& L for construction of 25 users septic tank complete, all as specified and shown on drawing No CESZ-TD-01/2015 Sheet No.1/3 & 2/3 dt 22 Feb 2015 (revised dt 21.03.2015 ) and specified in Particular Specifications.
M& L for construction of Soakage well of size 3 m dia at bottom and 4.5 m total depth complete all as specified and shown on drg No CESZ-TD-01/2015 Sheet No. 3/3 dt 22 Feb 2015 (revised dt 06.06.2015 ) and specified in Particular Specifications.
M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.
M&L for cement concrete Type C2 1:3:6 (40mm graded aggregate) in surface channels and drains complete all as specified and directed.
M&L for providing pre cast cement concrete (1:2:4) type B-1 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.
M&L for plain cement concrete (1:2:4) type B-1 using (20mm graded crushed stone aggregate) as in copings, plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified and directed.
M&L for Reinforced concrete pipes,Class NP2 of 600 mm laid in trenches and jointed complete with collars and side packing by returning filling etc complete all as specified and directed.
M & L for cement concrete bed (1:3:6)type C2 using 40 mm graded stone aggregate to drain pipes of 150 mm bore including packing under haunching against the site of pipe of 150 dia bore pipe complete all as specified and directed.
M&L for rendering 15mm thick in cm 1:4 with water proofing compound @ 3% by weight of cement on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Supply and fix ACSR conductor, any size as required, including stretching, fixing and binding to insulator on poles of LT lines service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified and directed.
Supply and fix mild steel cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.
Supply and fixing of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 100 mm height, 65 mm dia for 1100 volt grade complete all as specified and directed.
Supply and fixing of 80 mm bore Galvanised steel tubing light grade for protection of underground cable on poles / walls under road crossing etc conforming to IS-1239 complete all as specified and directed.
Supply and lay cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty 1100V grade with stranded AIuminium conductor of size 25 Sq mm 3.5 core complete all as specified and directed.
All as per item No93 above but 4 core16 Sqmm cable.
All as per item No 93 above but 4 core10 Sqmm cable.
Supply and erect steel tubular swaged poles ISI marked complete with cast iron base plate, final taper plug, bolts, nuts and screw drilling of holes for continuous GI earth wire as specified type 410-SP-31 (09 mtrs long) including applying two coats of aluminium paint over one coat of red oxide zinc chrome primer after preparation of surfaces. complete, with one earthing after every three poles (on the third poles) complete all as specified and directed. ( Note - Excavation and PCC shall be measured and paid separately).
Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
M&L for Security light bracket made of GI tubing 40 mm dia light grade 1.2 mtr long bend to shape suitable for above mentioned street light fitting with fix to pole with the help of flat iron clamp of size 40x6 mm two numbers with the help of nuts and bolts for fixing of street light fitting with one coat of red oxide and two coat of aluminium paint complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion complete all as specified and directed.
M & L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized earth lead GI strip 32x6mm by means of bolts, nuts, check nuts and washer of galvanized iron or steel besides welding at all joints as shown in drawing and including excavation and earth work, GI pipe medium grade 40 mm bore for protection of GI strip and connected to continuous earth lead on pole/test point supply and laying charcoal dust common salt PCC 1:2:4 type B-1, chamber and MS angle iron frame 40x40x 3mm and RCC cover 40 mm thick(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm c/c both ways with MS handle 12 mm dia PGI funnel and wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in electrical plate No-3 on srl page No 497 of SSR Part I (2020) drawing and connection to earth test point incl testing complete all as specified and directed. Note:- The cost of earth lead/strip and GI pipe for protection of earth lead/strip upto 7.5 M is included in the quoted rate.
Excavation in trenches exc 1.5 mtr wide, exc 1.5 mtr depth and n. exc 3 mtr depth and getting out in looses/soft soil complete all as specified and directed.
Material and Laying for sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified and directed.
Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid complete all as specified and directed.
Material and Laying for cement concrete in foundation of poles streets and stays 1:3:6 type C-2 using 40 mm graded crushed stone aggregate complete all as specified and directed.
Material and Laying for Cement concrete in foundation of poles streets and stays 1:4:8 type D-2 using 40 mm graded crushed stone aggregate complete all as specified and directed.
Material and Laying for Cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in pole coping (coping to be of .6 m tall and 0.6 m in dia) and stay assembly complete all as specified and directed.
Supply & installation of 12.5 M high mast shaft in two section suitable for 55 m/sec wind speed along with head frame, luminaries carriage suitable for 08 luminaries in symmetrical arrangement and other accessories manufactured in factory with raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial, (Wiring material from JB to individual luminairies & MCB in base compartment are not included and are a part of installation), with supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 No 9A contactors and raise lower push button, Incoming 25 sq. mm and out going 10 & 2.5 sq. mm terminals. 12.5 M High mast.
HIGH MAST SYSTEM MAKE : Bajaj Electricals Ltd Height of mast : 12.5 Meter No. of Section : Two Material Construction : S355 Grade as per BS-EN10 025 Base dia and top diameter (A/F) : Top : 120mm Botton : 380 mm Cross section of Mast : 16 side polygon Standard for Galvanisation : As per BS EN ISO 1461 Size of Opening and door at base : 1200 x 250 mm Diameter of base plate : 550 mm Thickness of base plate : 20 mm Lighting protection finial : GI single spike of length 1200mm Max. wind speed : 50m/s as per IS 875 (Part III) Number of foundation bolts : 10 Nos PCD of foundation bolts : 550 mm Type / diameter / length of foundation bolts : TS 600/30mm dia/ 850 mm long
FOUNDATION DETAILS 1. Excavation dimensions 2650 x 2650 x 1350mm size 2. Lean Concrete 100 mm thick ( 1: 4: 8) D2 (using 40mm graded Aggregate) 3. Matt bars 12mm dia TMT Bars @ 200C/C both ways in double layers 4. RCC (1: 1.5 : 3) of size 2600 X 2600 X300MM as in footing 5. RCC (1 : 1.5 : 3) of size 1000 X 1000 X 1400 MM (1100MM below GL and 300 mm above GL) 6. 8 Nos 16mm dia TMT Bars 4 at corners 4 at centres of pedestal col as main bar with 600mm long craking at bottom over matt bars 7. 16 Nos 12mm dia TMT main bars (4 Nos each at 4 side with 600mm long cranking at bottom over matt bars. 8. 10mm dia TMT bars @ 150mm C/C as Stirrups 9. 300mm dia 850mm long foundation bolts 06 Nos inserted in to 16 mm thick anchoring plate 590mm dia at bottom with pointed galvanised nut one each at bottom and top of plate. 10. Foundation bolt min clearance 150mm above pedestal col to rest high mast base plate 25mm thick over the bolts. Galvanised nuts 01 number at bottom of base plate 2 Nos at top of base plate. Note : The unit rate is inclusive of necessary formwork, RFR removal of surplus earth, external finishes and other unforeseen items complete all as specified and directed.
LUMINAIRES CARRIAGE Material of construction : 50 NB ERW Class B-M.S Pipe Diameter of carriage ring (mm) : 535 mm (ID) Construction : 06 Arm, Welded, 2 Sections Load carrying capacity : 08 Luminaire Lightning arrestor : 01 Nos
TRAILING CABLE Conductor : Copper, 5 core, 2.5 Sqmm Insulation : EPR insulated PCP scheathed No.of circuits per mast : One
WINCH / POWDER TOOL Type /SWL of winch : Double drum, SWL 750 Kg - SGDD Method of Operation : Integral Motor Motor Capacity : 1.0 HP ( Including suitable starter) No of Speeds : 6 Pole, Single speed Torque Limitor ; With Mechanical Tripping Facility
STAINLESS STEEL WIRE ROPE Grade / construction : AISI 316, 7/19 Construction Number of Ropes : Two Continuous Diameter (mm) : 6 mm Breaking load Capacity : 1850 Kg x 2
Supply and fix LED flood light fitting 120 Watts (with total lumen output not less than 12000 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) with ingress protection IP 66 and external SPD of capacity 10 KV in addition to inbuilt SPD of electronic driver , having Pressure die cast housing with high efficient output emitter LED for better distribution, protection with heat resistant toughened glass with individual LED lenses complete including MS Clamps of suitable size for fixing on High Mast /Pole complete all as specified and as directed.
Supply and fixing copper thimble of size 10 to 35 Sqmm complete all as specified and directed.
Supply and laying single core PVC flexible wire 1.5 sqmm , 240V for street light including earth wire of 1.5 Sqmm. Two run of single core wire and one Run of Earth wire will be Measured as one running Meter complete all as specified and directed.
M&L for hot pressed moulded SMC boxes with 200A rating Bus bar and distribution board and single core PVC FRLS single core copper conductor 1.5 sqmm in PVC conduit 20mm dia for connecting from junction box to street Light complete including MS clamps fabricated from 25 x 5 mm MS flat iron, nuts, bolts etc for mounding complete all as specified and directed. Note:- MCB's, PVC cable required will be measured and paid under relevant items .
S & F MCB SP 240 V 50 Hz, 10 KA, C curve of Rating 6 Amp complete all as specified and directed.
Material and labour for taking out the submersible pump set and motor assembly of capacity 20 HP from the bore well, by taking out the column pipes with chain pulley block and tripod stand , clamps complete using skilled and experienced labour and transporting the same to store complete all as specified and directed. Note: All arrangement & T&P required for lowering the column pipe in the bore shall be made by the contractor under their own arrangement at no extra cost.
Supply and lowering in bore well, GI medium grade pipe 50 mm bore in 6 mtr length both end flanged with MS flanges 10 mm thick with cut for passing the submersible cable and four no. of holes 10 mm dia with suitable size of nuts, bolts, washers, and rubber gasket complete all as specified and directed. Note: All arrangement & T&P required for lowering the column pipe in the bore shall be made by the contractor under their own arrangement at no extra cost.
Supply and fixing casing cap 200mm dia highly tempered with (MS-AN4Z) grade made out of MS sheet 3 mm thick and fixing with MS clamps 50x6 mm FI with nuts, bolts and washers complete in all respect complete all as specified and directed.
M&L for development of bore well as per IS-2800 by means of compressor of min 250 PSI capacity air compressor until the sand free water is obtained from the well for an uninterrupted period of 16 hours in a cycle of 24 hours. The final discharge shall be free form sand to deliver yield as quoted above and carrying out necessary yield test by V notch method/ by using water meters and submitting the test report complete all as specified and directed.
Supply, laying/ fixing cable for flat submersible with stranded copper conductor 3 core 1100 volts grade 6 Sqmm cross sectional area confirming to relevant IS complete all as specified and directed.
Supply and installation, testing and commissioning Pumping set submersible pump set multi stages min 5 stage suitable for 50 mm dia pipe complete with electric motor suitable for three phase 300 to 415 Volt 50 Hz AC size not less than 25 HP 5 Star rated suitable for 150 mm to 200 mm dia bore well and having discharge capacity 490 LPM at 50 m head (head range 150-230 M) complete stainless steel pump shaft and stainless steel impellers with delivery head of 80mm complete all as specified and directed.
M&L for chemical/bacteriological analysis and potability test of water obtained from bore well from Government lab or government approved lab and submitting the report in triplicate complete all as specified and directed. Note : test shall be conducted on water obtained after the completion of the project complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60 cmx60cm x 6 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level ,using galvanised iron strip 32×6mm as earthing lead (as earth lead wire), by means of bolt, nuts, check nuts and washer of GI and earth wire protection by provision of GI medium grade pipe, 15mm bore including provision of concrete pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced XPM(weight not less than 4 kg/Sqm) and frame of angle iron 25x 25x 3 mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape , GI medium 20 mm bore pipe for watering perforated at bottom 1.75mtr long placed on top edge of earth plate ,common salt and charcoal, fitting, test point with fixing arrangement , funnel ,wire mesh and earth work in any type of soil returning filling in and removal of surplus soil to a distance not exceeding 50m all as per electric plate No 3 of SSR- 2009 Pt 1 and Connection to earth test point all as specified and testing on completion complete all as specified and directed. Note:- Item of earthing includes the cost of 7.5m long galvanised iron earth lead wire and protection pipe of 15mm bore GI medium grade .
Supply and fixing in replacement of starter LT Panel Board, indoor type of suitable size as per relevant IS, mounted on angle iron legs of size 50x50x6mm imbedded in PCC 1:2:4 block type B-2 (using 40 mm graded aggregates) at pump house, floor mounting, dust and vermin proof, factory made (CPRI approved), fabricated out of 2 mm thick CRCA sheet suitable for 3 Phase, 415 Volt, 50HZ AC Supply, bus bar chamber with aluminum bus bar of suitable amp rating for 3 Phase and 4 wire system duly insulated with heat shrinkable sleeve as per colour, supported on epoxy insulator 01 set, common earth bus of 25 mm x 4mm at bottom inside panel board with two earth terminal out side panel board, cable alley cable gland with independent plate at bottom and complete panel board painted with powder coating in grey colour complete all as specified and directed.
(i) MCCB TP neutral link 415 volt 50 Hz, AC 160 Amps 36 KA with adjustable thermal magnetic release for over load & short circuit protection - 01 No as Panel In commer.
(ii) MCCB TP link 415 volt 50 Hz, AC 25-100A Amps 16 KA with adjustable thermal magnetic release for over load & short circuit protection - 02 Nos.
M&L for point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS-H insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS-H insulated un-sheathed copper conductor single core multi stranded cable (green colour) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.
M&L for point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS-H insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS-H insulated un-sheathed copper conductor single core multi stranded cable (green colour) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.
M&L for point wiring for 3 pin 5A socket outlet on the same board controlled by one switch with 1.5 sqmm PVC FRLS-H insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS-H insulated un-sheathed copper conductor single core multi stranded cable (green colour) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.
M&L for point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.00 sqmm PVC insulated FRLS-H un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC FRLS-H insulated un-sheathed copper conductor single core cable (green colour) as earth lead in and including 25mm PVC capping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.
M&L for LED Tube light fitting of 1x20 W for Decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site complete all as specified and directed.
S&F switch piano type flush 6 Amp Single pole one way (ISI Marked) complete all as specified and directed.
S&F Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed.
S&F Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.
S&F ceiling rose surface Bakelite 65x50mm two to three terminal (ISI marked) complete all as specified and directed.
Supply and fixing lamp holder bracket type, PVC/polycarbonate type with skirt cap suitable for batten fittings complete all as specified and directed.
Supply and fix LED Bulb 9 Watt for Item No.12 Above complete all as specified and directed.
Supply and fix surface mounted decorative bulk head edge -lit LED Luminaire comprising of high brightness LEDs of 1x10 W LED all as specified and directed.
S&F single pole and neutral (SPN) 30mA, 240V, 32 Amp complete all as specified and directed.
S&F MCB 'C' series, single pole 240V, 6 to 32 Amps complete all as specified and directed.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
Supply & laying of PVC flat twin core cable of 1100 Volts grade with stranded aluminium conductor of size 10.0 sqmm 2 core complete all as specified and directed.
Supply and fixing exhaust fan AC single phase, 1200rpm 230/240V of size 450mm sweep with louver heavy duty complete all as directed.
Supply & fixing of Electric water heater storage type of capacity 50 ltrs complete all as specified and directed..
Cutting the 50/25 mm dia GI pipes and fixing the required length/ insertion of tee for new GI pipe connections complete all as specified and directed.
S&F of 25mm bore gun metal globe gate valve (ISI marked) iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed.
S&F of GI water tubing ISI marked 25mm bore, galvanised medium grade, with all fittings like socket, union, elbow, bends, tees etc jointed and laid in trenches complete all as specified and directed.
S&F of GI water tubing ISI marked 20mm bore, galvanised medium grade, with all fittings like socket, union, elbow, bends, tees etc jointed and laid in trenches complete all as specified and directed.
S & F of 20mm bore gun metal globe gate valve (ISI marked) iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed.
M&L for lagging of pipes used in internal water supply or plumbing all round with 40mm thick bonded mineral wool performed 'SNAP ON' pipe section of density 144 Kg/Cum conforming to IS 9842 for 20mm dia provided with chicken mesh wire netting 25 gauge, 20mm mesh complete all as specified and directed.
patriotic builders
M/S BEE AAY CONSTRUCTIONS
Bidder Name
patriotic builders
M/S BEE AAY CONSTRUCTIONS
M/S MUNEER AHMAD WANI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .