REPAIR TO PUMP SET WATER SUPPLY INSTALLATION AND ALLIED WORK AT MIL STN SRI GANGANAGAR.

Amount

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 75HP from the existing foundation, Transportation to work shop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 60 HP from the existing foundation, Transportation to work shop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 25 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 20 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 15 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge. Make of motor-Crompton Greaves/kirlosker

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 12.5 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.(Make of Motor - Kirlosker)

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 5 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 3 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 2 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 1 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.

Drain out water from Raw water sum of size 7.5 M dia and 7.5 M depth and taking out sludge / mud / silt manually and removing / throwing away to a distance not less than 500 M away from the sump cleaning washing the inner walls applying two coat white wash on the walls of tank alongwith cleaning of outer surface of suction piplines 4 nos and painting with synthetic enamel paint of desired colour complete all as specified and directed by Engineer-in-Charge. (Note : Paint work shall be paid seperately)

Drain out water from clarifloculator tank of cap 2.25 LG of size 19.5 Mtr dia tank comprising of 9.5 Mtr floculator & 10 Mtr sedimentation - taking out sludge / mud / silt manually and removing / throwing away to a distance not less than 50 M away from the Clarifloculator sump including brushing, cleaning, washing the inner walls, scraper and other connected moving parts and applying two coats black paint on it and a coat of white wash on the walls of the tank complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up centrifugal pump (coupled with 75HP 3 phase elect motor) capacity 40,000 GPH, 60 Mtr head, 1450 RPM, Model No- DSM 100/36, S&D 125x100 mm from the existing foundation. Service/repair the unserviceable pump by insertion of graphite packing, rubber gasket , studs and greasing etc. Including replacement of unserviceable spare parts and reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge. Note: spares to be replaced shall be measured and paid separately as supply only in respective items of BOQ.

Supply only cast iron shaft sleeves.(DE/NDE) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge .

Supply only cast iron impeller 1st stage (CI IS 210-FG-200) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge .

Supply only cast iron impeller 2nd stage (CI IS 210-FG-200) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar

Supply only Set of gaskets (manufacturers standard) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge.

Supply only cast iron Wear ring for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge .

Supply only Cast iron Interstage ring for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge . Make of pump : Kirloskar

Supply only Cast iron split gland (DE/NDE) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge .

Supply only Cast steel pump shaft (CS IS 1570-40C8 hot rolled) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-charge .

Supply only Ball bearing No 6307 Make-NBC/SKF for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-charge .

Supply only Ball bearing No 3307 Make-NBC/SKF for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar . Note For srl item No 11 to 20:- Genuine spares from authorised dealer shall only be provided and replaced.

Disconnecting and taking up monoblock booster pumpset (coupled with 60HP 3 phase elect motor) capacity from the existing foundation. Service/ repair the unserviceable pump by insertion of graphite packing, rubber gasket , studs and greasing etc. Including replacement of seals and reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-charge.(Make of pump-Lubi). (Note: Spares to be replaced included in the job)

Disconnecting and taking up centrifugal pump (coupled with 60HP 3 phase elect motor) capacity 40,000 GPH, 60 Mtr head, 2900 RPM, Model No-CE80x26, S&D 125x100 mm from the existing foundation. Service/ repair the unserviceable pump by insertion of graphite packing, rubber gasket , studs and greasing etc. Including replacement of unserviceable spare parts d and reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-charge.(Make of pump-CG). Note: spares to be replaced shall be measured and paid separately as supply only in respective items of BOQ.

Supply only Shaft sleeve (ST AISI-410H 300 BHN) for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge .

Supply only cast iron impeller (CI IS 210-FG 200) for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar.

Supply only Pump shaft (CS IS 1570-40 C8 Hot rolled) for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge .

Supply only CI wear ring for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge .

Supply only Cast iron Gland for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge .

Supply only CI Lantern Ring for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar.

Supply only CS Impeller nut for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge .

Supply only Set of gasket for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge.

Supply only Set of Keys (C40) for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge. NoteFor srl item No 22 to 30 :- Genuine spares from authorised dealer shall only be provided and replaced.

Supply only rubber flap assembly for centrifugal pumping set Model No-SP6L complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up self priming centrifugal pump (coupled with 25 HP 3 phase elect motor) capacity 180000 LPH, 20 Mtr head 1410 RPM, SP6L from the existing foundation. Service/repair the unserviceable pump including necessary facing, grinding, turning, filling and replacement of bearings with greasing, resetting and machining of shaft, replacement of gun metal bearing bush, sleeves and studs and reassembling and fixing to its original, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up centrifugal pump (coupled with 20 HP 3 phase elect motor) capacity 50 LPS, 19 meter head, 1450 RPM, type-BCP 100x260 from the existing foundation. Service/repair the unserviceable pump by facing, grinding, turning, replacement of bearings with greasing, cast iron impeller, resetting and machining of shaft, gun metal bearing bush, and studs and reassembling and fixing to its original position, making mechanical connection and testing pumping set complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up centrifugal pump (coupled with 15 HP 3 phase elect motor) capacity 14.81 LPS, 34 meter head, from the existing foundation. Service the unserviceable pump by facing, grinding, turning, replacement of bearings with greasing, resetting and machining of shaft, gun metal bearing bush and studs and reassembling and fixing to its original position, making mechanical connection and testing pumping set complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up monoblock pumpset (primer mover 20 HP 3 phase elect motor) capacity 39200 GPH, 19 Mtr head 2900 RPM type-MEGA from the existing foundation, Repair the unserviceable pump by facing, grinding, turning replacement of bearing with greasing cast irom impeller, resetting and machining of shaft, gun metal bearing bush, and studs and reassembling and fixing to its original position making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up monoblock pumpset (primer mover 20 HP 3 phase elect motor) capacity 29.70 LPS, 30 Mtr head 2900 RPM type-KDS 2050 from the existing foundation, Repair the unserviceable pump by facing, grinding, turning replacement of bearing with greasing cast irom impeller, resetting and machining of shaft, gun metal bearing bush, and studs and reassembling and fixing to its original position making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up monoblock pumpset (primer mover 15 HP 3 phase elect motor) capacity 24.3 LPS/23.7 LPS, 29.5 Mtr head type-KDS 1537 from the existing foundation, Repair the unserviceable pump by facing, grinding, turning replacement of bearing with greasing cast irom impeller, resetting and machining of shaft, gun metal bearing bush, and studs and reassembling and fixing to its original position making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up monoblock pumpset (primer mover 12.5 HP 3 phase elect motor) capacity 25 LPS, 25 Mtr head, 2900 RPM, type-KDS 1331 from the existing foundation. Repair the unserviceable pump by facing, grinding, turning, insertion of graphite packing, cast iron impeller, replacement of bearing, greasing resetting and machining of shaft, gun metal bearish bush and studs and reassembling and fixing to its original position making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up monoblock pumpset (primer mover 7.5 HP 3 phase elect motor) from the existing foundation, Repair the unserviceable pump by facing, grinding, turning, insertion of graphite packing, cast iron impeller, replacement of bearing, greasing, resetting and machining of shaft, bearing bush, and studs and reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up monoblock pumpset (primer mover 5 HP 3 phase elect motor) from the existing foundation, Repair the unserviceable pump by facing, grinding, turning, insertion of graphite packing, replacement of bearing greasing, resetting and machining of shaft, gun jmetal bearing bush, and studs and reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.

M&L servicing of pumpsets 2HP to 3HP alongwith motor (any type) including replacement of suitable mechanical seal and packings, coupling repairs, replacment to bearings, resetting and machining of shaft, bearing bush, and studs and reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, MCCB 4 pole, 415V, adjustable 100 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-charge.

S&F in replacement, MCCB 4 pole, 415V, adjustable 250 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-charge

S&F in replacement, MCCB 4 pole, 415V, adjustable 63 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-charge

S&F in replacement, MCCB 3 pole, 415V, adjustable 160 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-charge

S&F in replacement, 3 pole AC power contactors, 415 volt rating coil, freedom series, suitable for 60 KW/75 HP, 3 phase electric motor starter complete all as specified and directed by Engineer-in-charge.

S&F in replacement, 4 pole AC power contactors, 415 volt rating coil, NHD series, suitable for 20 HP, 3 phase electric motor starter complete all as specified and directed by Engineer-in-charge.

S&F in replacement, Oil immersed Fully automatic star-delta starter with bi-metalic relay suitable for 400V,3 Phase AC,50 Hz, 15HP Electric Motor including initial fill of starter oil and making elect connection and testing Type-KF-40 complete all as specified and directed by Engineer-in-charge. Make-Bentex-Kelsons or equivalent in L&T/Havells.

S&F in replacement, direct on line citation motor starter 415V coil suitable for 2 HP/1.5KW, overload relay range-2.4-3.8 Amp, complete with SS enclosure complete all as specified and directed by Engineer-in-charge.

S&F in replacement, direct on line citation motor starter suitable for 1-2 HP single phase motor, with ss enclosurecomplete all as specified and directed by Engineer-in-charge.

S&F in replacement, phase preventer for 75/60 HP pump motors complete all as specified and directed by Engineer-in-charge.

S&F in replacement power contactor suitable for L&T ML6 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement power contactor suitable for L&T ML4 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement timer block suitable for L&T ML6 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement timer block suitable for L&T ML4 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement overload relay L&T ML6 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement overload relay L&T ML4 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement overload relay suitable for BCH 15 T.3.00.380 for 75 HP pumpset as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement overload relay suitable for BCH N1N star delta starter for 20 HP pumpset as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement, mild steel coupling and supply and fix mild steel coupling complete with tyre No-TC-11 of make-Unique/Power/Supreme alongwith alignment of shafts complete all as specified and directed by Engineer-in-charge

S&F in replacement, mild steel coupling and supply and fix mild steel coupling complete with tyre No-TC-17of make-Unique/Power/Supreme alongwith alignment of shafts complete all as specified and directed by Engineer-in-charge

S&F in replacement, mild steel coupling and supply and fix mild steel coupling complete with tyre No-TC-19 of make-Unique/Power/Supreme alongwith alignment of shafts complete all as specified and directed by Engineer-in-charge

M&L for preparation of old painted surfaces of any description or girth and applying spray painting with synthetic enamel paint of desired colour on MS pipe, gates, door etc of any size complete all as specified and directed by Engineer-in-Charge.

Supply only copper thimbles 25 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply only copper thimbles 35 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply only PVC nylon braded heavy duty flexible pipe of dia 50mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Cast iron fittings (ISI marked) 200 mm rto 300mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for flanged pipes, complete, fixed in repairs, all as specified & directed by Engineer-in-Charge.

Supply and fixing in replacement Cast iron Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth for CI pipe 100 mm to 150mm bore suitable for flanged pipes, complete, fixed in repairs, all as specified & directed by Engineer-in-Charge.

Supply and fixing Cast iron fittings (ISI marked) 100 mm to 150 mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for flanged pipes, complete, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement Cast iron Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth for CI pipe 200 mm to 300mm bore suitable for flanged pipes, complete, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of starter panel box outdoor type of size appx 1.2mX1.2mX0.3m , made out of CRCA mild steel sheet, thickness 3.15 mm single door with lock arrangement alongwith housing for voltmeter and ampere meter suitable for fixing 10 HP to 20 HP motor starters and MCCBs, suitable bus bars capacity 200 Amp, connection arrangements etc including taking down existing starters, MCCBs , refixing them complete and fixing in wall with suitable cutting,cement work etc all as specified and directed by engr in Charge

Testing out water sample in containers and getting the water tested from the department of water test examination with PHED water test laboratory at Sriganganagar or any NABL accredited lab for chemical and bacteriological test complete all as directed by Engineer-in-Charge. Parameter ( Test Periodicity: As per requirement and as directed by Engineer-in-Charge) (a) (i) Colour (ii) Turbidity (iii) Residual Chlorine (iv) Total Chlorine (b) (i) pH (ii) Chloride (iii) Flouride (iv) Iron (v) Hardness (vi) Total plate count (vii) Electrical conductivity (viii) Sulphate (ix) Nitrate (x) BOD test (xi) COD test (c) Bacteriology tests (i) E Coli Test

S&F FRP roofing sheets including all joinery items complete all as specified and as directed by Engineer-in-Charge.

S&F, in replacement, MS work of required size with all additional joinery items and colour on all complete as specified and directed by Engineer-in-charge.

Supply and lay in replacement jointing and testing and commissioning in replacement of 16 Sqmm x 4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.

Supply and lay in replacement jointing and testing and commissioning in replacement of 35 Sqmm x 3.5 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.

Excavation in trenches not exceeding 1.5 mtr wide and not ecxceeding 1.5 mtr depth for laying of cables including taking up or down the LT cable complete all as specified and as directed by Engineer in Charge.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and as directed by Engineer in Charge.

Removal of Excavated material n exceeding 50 mtr and depositing where directed by Engineer-Charge.

Supply and filling in Sand for Cable protection complete all as specified and directed by Engr-in-Charge.

Supply and lay standard size bricks subclass B type complete all as specified and as directed by Engineer in Charge.

Supply and fix in replacement CI reflux valve suitable for 3 inch pipe dia complete all as specified and as directed by Engineer in Charge.

Supply and fix in replacement fan cover suitable for 3 phase induction motors 5 HP to 7.5 HP as per existing model complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement fan cover suitable for 3 phase induction motors 10 HP to 15 HP as per existing model complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement fan cover suitable for 3 phase induction motors 20 HP to 25 HP as per existing model complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement pump casing suitable for three phase centrifugal pumpsets 20 HP to 25 HP as per existing model complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement single phase openwell submersible pumpset of capacity 1 HP complete all as directed.Make:

Supply only PVC flexible pipe 50 mm dia including necessary connection accessories complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement suction sweeper of length 90cm approx and width 20 cm approx suitable for connection to pumpset 7.5 HP at swimming pool complete all as specified and as directed by Engineer in Charge.

M&L repair to manual mobile floor crane at clear water complex for pumpset lifting including greasing, change of tyres, hydraulic lift repair etc complete all as specified and as directed by Engineer in Charge.

Supply only nut, bolts, studs etc for daily general maintenance as per existing size complete all as specified and as directed by Engineer in Charge.

Disconnecting, dismantling and taking aside the pump set of 20 HP capacity and replacement of new frame/MS channel of required capacity and dismantling of existing PCC/RCC foundation and refixing the same pump set by preparing sufficient PCC foundation and base frame required for 20 HP pump set including connecting items like nuts, bolts and setting the alignment of pump set testing and commissioning all as specified and directed by Engineer-in-charge.

S&F in replacement three phase off load changeover 415 V 125 amps complete with suitable outdoor panel IP 65 protection made out of CRCA mild steel sheet, thickness 2.25 mm single door with lock arrangement and grouting on ground including all necessary electrical connections with accessories complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement PVC reflux valve 3 inch dia complete all as directed and specified by Engineer-in-Charge.

S&F in replacement PVC reflux valve 2 inch dia complete all as directed and specified by Engineer-in-Charge.

Disconnecting, dismantling and taking aside the pump set of 12.5 HP to 15 HP capacity and replacement of new frame/MS channel of required capacity and dismantling of existing PCC/RCC foundation and refixing the same pump set by preparing sufficient PCC foundation and base frame required for 12.5 HP pump set including connecting items like nuts, bolts and setting the alignment of pump set testing and commissioning complete all as specified and directed by Engineer-in-charge.

Removing vegetations/bushes/foreign meaterial etc around the periphery/path of raw water reservoir 130 Lacs Gallon cap (size of reservoir 136mtr x 136mtr), clear water complex area, pump houses etc throwing the wastage ate distance not less than 50 mtr as and where complete all as specified and directed by Engineer-in-charge. Note - T &P and safety equipment required for the work is to be provided by the contractor.

M&L replacement of glands in sluice valves of size 200mm-300mm dia complete all as specified and directed by Engineer-in-charge.

M&L replacement of glands of pumpsets of cap 20 HP to 75 HP complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections of size 80mm bore complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections of size 50mm bore complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections of size 40mm bore complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections of size 25mm bore complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections of size 20mm bore complete all as specified and directed by Engineer-in-charge.

M&L for galvanized steel water tubing medium grade of 20mm bore with including all fittings complete, laid in trenches, complete all as specified and directed by Engineer-in-charge.

M&L for galvanized steel water tubing medium grade of 25mm bore with including all fittings complete, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.

M&L for galvanized steel water tubing medium grade of 40mm bore with including all fittings complete, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.

M&L for galvanized steel water tubing medium grade of 50mm bore with including all fittings complete, laid in trenches complete all as specified and directed by Engineer-in-charge.

M&L for galvanized steel water tubing medium grade of 80mm bore with including all fittings complete, laid in trenches complete all as specified and directed by Engineer-in-charge.

Excavation in trenches in soft/loose soil & getting out in n.exc. 1.5 m wide & n. Exc. 1.5m in depth for foundation etc n exc 10 sqm on plan and n. Exc. 1.5m in depth in soft/loose soil and getting out complete all as specified and directed by Engineer-in-charge.

Returning filling in including spreading, levelling, watering and wel reamming in layers n.exc. 25cm in sof/loose soil complete all as specified and directed by Engineer-in-charge.

Removing excavaed materila n. exc. 50 m & depositing where directed at a level n. Exc. 1.5 m aboe the starting point complete all as specified and directed by Engineer-in-charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

AYUSH BUILDERS