Restoration of rain damages to LWSS Mehli in G.P Beolia under Sub- Division No-1 Tehsil and Distt. Shimla H.P. (SH Laying Jointing of G.I Pipes in distribution system, complete with fitting etc.) Under CRF.

Amount

Excavation in drains and channels etc. in earth work for pipes upto all depth in all classification of earth work such as pick work, jumper work, saturated soil i/c balling or pumping out water, blasting soft /hard rock or chiseling soft/ hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming and dressing of sides ,levelling of beds to correct grade including shoring /struting ,planking ,timbering and dewatering wherever required stacking the useable /unusable material/soil seperately and after laying,jointing and testing of pipes ,returning the useable soil in treches in 15 cm layers including consolidating of such deposited layer by ramming and watering and then disposing of all surplus excavated soil/unusable material as directed within all leads and lifts including restoration of un-metalled surfaces to its orginal condition and including cost of diversion for traffic, night signals,fixing caution boards,crossing over trenches for access to houses, fencing etc. complete in all respect whithin all leads and lifts as per direction of the Engineer-in-charge.

Laying and jointing in trenches galvanised mild steel tubes (Light grade) e tube fittings such as Tee elbow union & nipple (earth work in trenches to be measured and paid for separately) We all leads and lifts and as per direction of Engineer-in-charge complete in all respect. Labour rate only

40mm dia

50mm dia

65mm dia

Providing circumferencial butt welding joints by electrical arc welding to following dia of G.I.Pipes medium/heavy class welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS:816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)-CITOJET/ESAB make, confomring to IS:814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of the Engineer-in-charge.

65mm dia nominal bore.

50mm dia nominal bore.

40mm dia nominal bore.

Cutting of pipes 50mm dia with electric welding complete in all respect as per direction of Engineer-in-Charge

65mm dia nominal bore.

50mm dia nominal bore.

Providing and fixing double flanged cast iron sluice valve of Leader/Bhel/ Kirloskar/Kilburn/KSB/Fouress/ Pelicon and other reputed make for common header and capable of with standing the normal seat pressure as per PN 1.0 IS: 14846, C.I. body including two Nos. M.S.flanges table.5 duly welded in the pipe with nut and bolts and gasket sheet including all leads and lifts with upto date ammendment with rising main complete in all respect as per the direction of Engineer-in-charge.

i) 65 mm dia PN-1.0

ii) 50 mm dia PN-1.0

Prov. and fixing brass full way valve with wheel of superior quality including all leads and lifts complete in all respect.

15mm dia

20mm dia .

25mm dia .

32mm dia .

40mm dia .

50mm dia .

65mm dia .

Fabricating/ Making outlets/ distribution junction i/c all required fittings/ fixing as per drawing i.e. reducer, wheel valve, nipples, plug, socket, union etc. all are of generally 32mm to 25mm dia and welding wherever required and fixing the same at site of tank for further release/ distribution-connection of water to the farmers, complete in all respect as per the direction of Engineer-in-charge.

Hire charges for diesel generator set for cutting of pipe with all leads and lifts complete in all respect.

Hire charges for pick up vehicle for diesel generator set with all leads and lifts complete in all respect.

MS JARNAIL STEEL WELDING WORKS (BID ID -562597)

AMRISH (BID ID -562624)