PROVN OF 15 X SECURITY LIGHTS, PROVN OF LIGHT AND WATER NEAR HELIPAD AND PROVN OF INSTALLATION OF 12 X GEYSER OF 25 LTR UNDER GE(WEST)PATHANKOT

Amount

Supply,Laying or passing through pipe underground cable of PVC sheathed, XLPE insulated armoured LT 1100 volts grade with aluminium conductor of size 10 Sqmm,2 core including making electrical connection confirming to IS -7098 Part-I and its latest amendements complete all as specified.

Supply,Laying or passing through pipe underground cable of PVC sheathed, XLPE insulated armoured LT 1100 volts grade with aluminium conductor of size 16 Sqmm,4 core including making electrical connection confirming to IS -7098 Part-I and its latest amendements complete all as specified.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of new/serviceable cables/pole/pipe or for fault finding in existing cable and getting out soil in soft/loose soil complete all as specifed.

All as per srl item No. 3 here-in-before but depth exceeding 1.5 mtr and n. exceeding 3 mtr.

Removing excavated material not exceeding 50 mtr and depositing where directed in a level not exceeding 1.5 mtr above the starting point of any type of soil complete all as specified

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified.

M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable all as specified. Note: Punned thickness of sand shall be measured & paid i.e 18 cm

M&L for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick complete all as specified.

M&L for Prestressed concrete pole, 9.0 metres long 102mm x 152mm at top and 102 mm x 289 mm at bottom, class 10 , numbering new pole and applying two coats of synethic enamel paint upto 1.5 mtr from top of coping for black and white strip alternately each 30 cm wide.(Note: Earth work including excavation ,Returning filing,PCC work,removing excated material will be measured and paid separetly under respective items of schedule)

M&L PCC 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in foundation of poles/coping,stay etc complete all as specified.

M&L PCC 1:4:8 type D-2 ( Using 40mm graded stone aggregate ) as in foundation of poles filling and mass concrete complete all as specified.

M&L for thermoplastic cable junction box IP-67 rated of size in mm 205x255x112 including one 6 Amp MCB SP and single phase bus bar, 'weather proof' for outdoor installation (with knockouts for cable entry) the junction ox shall be insulated and made out of polycorbonate with glass fiber reinforced. complete all as specified and as directed.

S&F LED street light fitting of 90 watts, 5700k, IP 66 power factor >0.95, IK-08 having 120 lm/watt efficacy with invidual lens cover on each LED, rendering index > 70, 5 KV integrated surge protection, external 10 KV surge protection potted driver, toughned glass cover in high pressure die-cast powder coated aluminium housing and making connection using flexible copper cable of suitable size, manufacturer LOGO shall be engraved into housing of luminaries complete all as specified and directed by Engineer -in-charge.

M&L for single run PVC insulated and PVC sheathed cable HR with copper conductor of size 3 core x 1.5 Sqmm and necessary conduite pipe of size 20mm for protection from wind/sunlight proper clamping etc from junction box to bracket of streetlight complete all as specified and as directed.

S&F bracket for fixing of street light fittings bend to shape, made out of 25 mm dia GI pipe medium grade upto 1.5 mtr long fixed with and including two sets of MS clamp made out of Flat iron of size 50x6 mm, fabricated to shape and fixed with nuts, bolts & washers & two coats of aluminum paint over a coat of red oxide primer on iron component complete all as specified and directed by Engr-in-charge.

Supply, installation commissioning and testing of CPRI approved bus bar chamber of size 700mmx400mmx300mm made up of MS sheet 3.15mm powder quoted with 7 tank process with RAL 7032 code (siemens Grey) and aluminium strip of 50x6mm-04 Nos (600mm long) with 63Amps, 25KA, 4 Pole MCCB's having adjustable thermal and adjustable release, ICS=ICU=100% confirming to iec 606947 alongwith spreaded link for connection and mounted on angle iron 40x40x6mm having 4 Nos legs of 45cm long, 15 cm grouted in PCC of ratio 1:2:4 including incoming and outgoing connection complete all as specified and as directed. Note:-: Drawing of bus bar chamber shall be got approved from GE by contractor before placing order.

S&F Decorative & cylindrical shape 8 Watt LED Bollard garden light with integrated LED driver offers comfortable soft light high durability & IP 65 complete all as specified and directed by Engr-in-Charge.

S&F 15W LED Post top light with aluminium enclosure, IP 65 energy saving, environment friendly, long life asthetically designed with symmetrical light distribution having clear cover for bright illumination with high power leds including connection with copper wire complete all as specified and directed.

S&F LED flood light fitting 100W , energy saving, enviormental friendly, long life, exclusive innovative dia cast aluminium IP-65 with high power LED's as light source, suitable for highlighting architectural features on existing high mast poles/wall/any position or place and making connections with provn of suitable size copper conductor complete all as specified and as directed.

S&F sub Main Wiring with two PVC insulated unsheathed multistrand FRLS-H flexible copper conductor cable of size 2x2.5 sqmm and one PVC insulated multistrand unsheathed FRLS-H flexible copper conductor cable of size 2.5 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.

S&F sub Main Wiring with two PVC insulated unsheathed multistrand FRLS-H flexible copper conductor cable of size 2x4 sqmm and one PVC insulated multistrand unsheathed FRLS-H flexible copper conductor cable of size 4 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F MCB SP 240 volts any rating from 6 to 40 amps, 'B' curve with rupturing capacity 10 KA, 50 Hz including providing thimble for out going cables complete all as specified and directed.

S&F MCB SPN 240 volts any rating from 6 to 40 amps, 'B' curve with rupturing capacity 10 KA, 50 Hz including providing thimble for out going cables complete all as specified and directed.

S&F MCB SP 240 volts, rating 20 amps, 'C' curve with rupturing capacity 10 KA, 50 Hz including providing thimble for out going cables complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 05 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).

S&F GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall/Pole including fittings /clamp complete all as specified and directed.

S&F 25 mm bore Steel water tubing 'medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors/tranches complete all as specified .

M&L for GI tubing medium grade 15mm bore on floor/wall including fittings complete including all necessary fittings to hold the pipe along the wall like hook, bolts, etc complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25 mm bore complete all as specified and as directed by Engr-in-Charge.

M&L for cutting/drilling of 50/80mm GI pipe for connection of 25mm GI pipe including all required accessories and earth work if required complete all as specified and as directed by Engr-in-Charge.

Supply and installation of the electric water storage heater of ABS body type, 25 ltr capacity with rated power 2KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangements and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and as directed.

S&F fancy type CP stop cock/angle valve heavy duty cast copper alloy screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as specified & directed

S&F 15mm dia fancy type CP Bib taps heavy duty, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 5A/16A, 5 in 1 switch socket combination including flushing in wall MS terminal sunken box of adequate size having thickness not less than 1.2mm and hylam sheet 3mm thick fixed with brass screw and washers including making good the disturbed surface complete all as specified and as directed.

S&F kitchen wall mounted sink mixer with swivel cast spout of size 15mm dia polished bright cast copper alloy chromium plated complete all as specified and as directed. Make:- JAQUAR/PRAYAG/PLAYER/SILVERSHINE

satpal and brothers (BID ID -3459917)

M/S SUDERSHAN KUMAR CHOPRA GOVT CONTRACTORS (BID ID -3456692)

Vishav Karma Refrigeration and Electric Work (BID ID -3456211)