work against sanction package under deposit scheme on full turnkey basis

Amount

fo|qr uxjh; forj.k [k.M&izFke xksj[kiqj ds vUrxZr tek ;kstuk esa Lohd`r iSdst la[;k 08@2023&24 ¼nhun;ky mik/;k; xksj[kiqj fo'ofo|ky; esa uofufeZr xq: Jh xksj{kukFk 'kks/kihB Hkou ds fo|qrhdj.k dk dk;Z½ ds dk;ksZ dks Qqy VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

11 KV PPMC (30/5A)

11 KV Electronic TVM Meter

11 kv CT/PT metering pole mounting unit (30/5 A)

Supply of following material/fitting complete in all respect :-

400 KVA T/F 11/0.4 KV

250 KVA T/F 11/0.4 KV

Cable AL. 3x120 SQ MM. XLPE 11 KV

HDPE Pipe dia 150 mm PN 6 PE 80

Cable Jointing Kit for Cable AL. 3x120 SQ MM. XLPE 11 KV

S.T. Pole 11 Mtr Long

11 KV Top Channel

11 KV Dropper Angle

11 KV Fuse Set

11 KV TPMO with polymer insulator

Earthing Complete

11 KV Pin Insulator with Pin

ACSR Weasel Conductor

11 KV VCB for O/G CTR 200/100/5A, 350MVA (Crompton make)

11 KV Bus Coupler 350 MVA (Crompton make)

Holding Clamp with Nut & Bolts (for Top ,TPMO,Fuse set ,Dropper angle )

Z clamp for T/F

Al Lugs for T/F

NUT & BOLTS OFF SIZE

Bus Coupler duct box

The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.

Fabrication, errection, commissioning & Testing of 250/400 KVA T/F on Double Pole with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor.

Laying of HDPE Pipe 150 mm Diameter for laying of 11 KV 3x120 sq mm XLPE Cable by horizontal drilling method. The HDPE pipe shall be of PE 80 grade with pressure rating PN6 conforming to IS 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm (HDPE pipe 150mm dia with elbow and socket for 11 KV cable will be supplied by contractor)

Laying and dressing of under ground 11 KV 3x120 sq mm XLPE Cable into HDPE Pipe (Wherever required) by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.

Erection of 11 KV XLPE Cable 3X120 mm² Jointing Kit with complete work

Chemical earthing of Transformer (Body) as per IS Code 3043 - 1987 specification (Materials will be provided by contractor)

Hoisting of 11 KV XLPE Cable Providing 4'' Dia GI Pipe 3 M Long with complete Work

Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO norms.

Painting of Pole by double coating Aluminum & Red oxide paint. Paint will be provided by contractor

Erection of TPMO & Fuse set

Installation, commissioning & Testing of 11 KV VCB for O/G CTR 200/100/5A, 350 MVA including making plinth and foundation of VCB. Complete all connection in all respect.

Installation, commissioning & Testing of 11 KV BUS Coupler 350 MVA including arrangement and alignment of Bus coupler duct box. Complete all connection in all respect.

Installation of PPMC (30/5A) with 11 KV TVM Meter & 11 KV CT/PT Pole Mounting Unit

Earthing of PPMC (30/5A) & CT/PT Unit

Construction of T/F plinth of size 2x2x1.2 mtr with the help of first class brick & 9" masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely and plastering outer surface as per RESPO norms. Top of the plinth covered with 4" RCC Slab of ratio 1:1.5:3 (Cement, sand & concrete) grouting with 2 Nos. ISMC size 125X65X6 MM (confirming to IS 808:1989) of 2000 mm long for resting. All required materials will be provided by the contractor.

Grill fencing of 11/0.4 KV S/S shall be made of rectangular of size & height approx 2 meter as per site requirement with fabrication 50X50X5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of grill, having a gate on road side must have provision of locking arrangement. The work is including painting of fencing as per norms. Work will be done as per RESPO specification.

ARK ENGINEERING