Construction RCC Protection wall and with compound wall and MS Gate at Town Baptist Church, Nirjuli

Amount

Welcome Gate with MS Grill

Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Providing and laying bolder piching laid under the foundation footing laid dry as per technical Specification.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:a) Foundations and plinth.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcemen

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size

Reinforcement of RCC work including straightening, cutting, bending, placing in position and binding all complete.a) Cold twisted bar.

Centering and shuttering including strutting, propping etc. and removal of form for: a) Foundations, footings, bases of columns, etc. for mass concrete

e) Columns, Pillars, Piers, Abutments, Posts and Struts.

Providing and laying machine cut, miror polished Marble Stone flooring in requiored design (Simple geometrical abstract etc) and in patterns in combination with Italian surface texture etc, in linear portion of the building all complet as per the architectural drawing with 18mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 laid and jointed with white cement slurry @ 4.4 kg/Sqm including pointing with marble shade including rubbing curing and polishing etc all complete as specified and as direction by the Engineer-in-charge. 18mm thick italian Marble stone slabe periato, Rossoverona, fire red or dark Emperadore etc

Extra for providing edge moulding to 20m thick marble stone counters, vanities etc over DSR item no. 8.2 including machine polishing to dge to give hogh gloss finish etc complete as per design approved by engineer-in-charge.

Providing and fixing MS Gate of required pattern in RCC Column, MS flat, square or round bars with round headed bolts and nuts or by screws. Ornamental Gate

RCC Retaining Wall-6m Height-90m

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)Ordinary soil, Manual Means, above 3m depth

Providing and laying in foundations and plinth cement concrete 1 : 3 : 6(1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications, RCC Grade M20, Height upto 5m, Using concrete Mixer

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification, Granular material

RCC Retaining Wall-5m Height-120m

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Ordinary soil, Manual Means, above 3m depth

Providing and laying in foundations and plinth cement concrete 1 : 3 : 6(1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications, RCC Grade M20, Height upto 5m, Using concrete Mixer

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification , Granular material

M/s Neelam Sonju

M/s Suraj Enterprises