Bhusawal-1)BSL ZRTI- Improvement of administrative building like doors windows in examination hall, staff, office and lavatory block ground floor and first floor. (ID No.01.01.64.25.3.50.011) 2)BSL ZRTI-Provision of balance boundary wall approx. 400 m in ZRTI BSL.( ID No.01.01.64.25.3.50.010) 3)BSL FP- Replacement of old CI pipe line rising main with DI pipe line from filter house to limpus club. (ID No.01.01.51.25.3.50.003) 4)BSL FP- Replacement of old CI pipe rising main with DI pipe line from filter house to loco tank. (ID No.01.01.51.25 .3.50.002) 5)BSL FP- Replacement of old CI pipe line from loco tank to ZRTI. (ID No.01.01.51.25.3.50.001) 6)BSL FP-Replacement of rising main pipe line from new intake wll to new 20MLD filter plant (ID No. 01.01.51.25.3.50.014)

1A-(1) BSL ZRTI- Improvement of administrative building like doors

1B-(1) BSL ZRTI- Improvement of administrative building like doors

2A-(2) BSL ZRTI-Provision of balance boundary wall approx. 400 m in

2B-(2) BSL ZRTI-Provision of balance boundary wall approx. 400 m in

3A-(3) BSL FP- Replacement of old CI pipe line rising main with DI pipe

4A-(4) BSL FP- Replacement of old CI pipe rising main with DI pipe line

5A-(5)BSL FP- Replacement of old CI pipe line from loco tank to ZRTI. (ID

6A-(6)BSL FP-Replacement of rising main pipe line from new intake wll

6B-(6)BSL FP-Replacement of rising main pipe line from new intake wll

@ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY 22.22A P r o v id in g and applying fibre reinforced Sqm 100 563.1 56310 elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted 56 elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge. 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58- 60 (Suspension Grade), calcium carbonate a n d natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) 26.87 & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 57 26.87.1 30 mm thick Sqm 35 4346.7 152134.5 Total 12520651.70 Schedule 1B-(1) BSL ZRTI- Improvement of administrative building like doors windows in Schedule examination hall, staff, office and lavatory block ground floor and first floor. (ID No.01.01.64.25.3.50.011) Item- 1 USSOR-2011 items S No. Item No Description of Item Unit Qty Rate Amount

Providing and fixing 110mm dia PVC soil, Metre waste and vent pipes including jointing and cost of spun yarn and sand etc. complete

Providing and fixing 110 mm PVC Plain bend Each of the required degree with access door inclusive of 3mm thick bitumastic felt washer, bolts and nuts, complete, including jointing and cost of spun yarn and sand etc. complete

Providing & fixing PVC Nahani trap 100mm Each and with PVC cover including making holes in walls, beams etc. and fixing with utmost care to avoid leakage. The rate includes testing the trap & flow junction joints etc. for water tightness & making good and finishing the damaged portion.(a) Nahani Trap 100 mm Total 50843.70 Schedule 2A-(2) BSL ZRTI-Provision of balance boundary wall approx. 400 m in ZRTI BSL.( ID

Item- 1 DSR-23 items

S No. Item No Description of Item Unit Qty Rate Amount

1.0 CARRIAGE OF MATERIALS

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

By Mechanical Transport including loading,

unloading and stacking

1.1.2 Earth

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical

means (Hydraulic excavator)/manual means

over areas (exceeding 30 cm in depth, 1.5 m

2.6 in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and for all lift, as directed by

Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - All work up

to plinth level :

derived from natural sources : 4 graded

stone aggregate 20 mm nominal size

derived from natural sources)

5.0 REINFORCEMENT CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified

grade of reinforced cement concrete,

5.1 excluding the cost of centering, shuttering,

finishing and reinforcement - All work up to

derived from natural sources : 3 graded

stone aggregate 20 mm nominal size

derived from natural sources)

Reinforced cement concrete work in walls

(any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets,

5.2 columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five

level, excluding cost of centering, shuttering,

finishing and reinforcement :

derived from natural sources : 3 graded

stone aggregate 20 mm nominal size

derived from natural sources)

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. Sqm 306 392.15 119997.9

for mass concrete

5.9.2 Walls (any thickness) including attached Sqm 1750 842.5 1474375

7 pilasters, buttresses, plinth and string

5.9.3 Suspended floors, roofs, landings, balconies Sqm 80 927.25 74180

and access platform

5.9.16 Edges of slabs and breaks in floors and walls

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

5.22.6 Thermo-Mechanically Treated bars of grade Kg 6900 107.85 744165

Fe-500D or more.

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete above

5.22A.6 Thermo-Mechanically Treated bars of grade Kg 7900 107.85 852015

Fe-500D or more.

13.0 FINISHING

13.44S EXTERIOR FINISHING

Finishing walls with Acrylic Smooth exterior

paint of required shade :

12 ltr/10 sqm over and including priming coat of

exterior primer applied @ 0.90 litre/10 sqm)

Schedule 2B-(2) BSL ZRTI-Provision of balance boundary wall approx. 400 m in ZRTI BSL.( ID

Item- 1 USSOR-11 items

S No. Item No Description of Item Unit Qty Rate Amount

1 098090 Laying 80 mm thick oversized stone ballast Sqm 560.00 129.34 72430.40

75 mm to 100 mm gauge in soling of floors,

hand packed including hand packing, filling

voids with sand and watering, ramming and

Schedule 3A-(3) BSL FP- Replacement of old CI pipe line rising main with DI pipe line from filter

house to limpus club. (ID No.01.01.51.25.3.50.003)

Item- 1 DSR 2023 items

S No. Item No Description of Item Unit Qty Rate Amount

18.0 WATER SUPPLY

18.23S C.I./DUCTILE IRON PIPES & SPECIALS

Providing and laying S&S C.I. standard

18.25 specials such as tees, bends, collars, tapers,

caps etc. (Heavy class):

Providing and laying flanged C.I. standard

specials such as tees, bends, collars, tapers,

caps etc., suitable for flanged jointing as per

C.I. SLUICE VALVES/ FIRE HYDRANTS &

Providing and fixing C.I. sluice valves (with

cap) complete with bolts, nuts, rubber

insertions etc. (the tail pieces if required will

be paid separately) :

18.31.6 300 mm diameter

18.59S AIR VALVE & WATER METER (BULK TYPE)

Providing and fixing C.I. double acting air

valve of approved quality with bolts, nuts,

18.59 rubber insertions etc. complete (The tail

pieces, tapers etc if required will be paid

Providing push-on-joints to Centrifugally

(Spun) Cast Iron Pipes or Ductile Iron Pipes

including testing of joints and the costof

rubber gasket :

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Providing and laying S&S Centrifugally Cast

18.72 (Spun) / Ductile Iron Pipes conforming to IS :

Dismantling old C.I. pipes including

excavation and refilling trenches after taking

out the pipes, breaking lead caulked joints,

melting of lead and making into blocks,

including stacking of pipes at site lead up to

Schedule 4A-(4) BSL FP- Replacement of old CI pipe rising main with DI pipe line from filter house to

loco tank. (ID No.01.01.51.25 .3.50.002)

Item- 1 DSR 2023 items

S No. Item No Description of Item Unit Qty Rate Amount

18.0 WATER SUPPLY

18.23S C.I./DUCTILE IRON PIPES & SPECIALS

Providing and laying S&S C.I. standard

18.25 specials such as tees, bends, collars, tapers,

caps etc. (Heavy class):

Providing and laying flanged C.I. standard

specials such as tees, bends, collars, tapers,

caps etc., suitable for flanged jointing as per

C.I. SLUICE VALVES/ FIRE HYDRANTS &

Providing and fixing C.I. sluice valves (with

cap) complete with bolts, nuts, rubber

insertions etc. (the tail pieces if required will

be paid separately) :

18.31.6 300 mm diameter

18.59S AIR VALVE & WATER METER (BULK TYPE)

Providing and fixing C.I. double acting air

valve of approved quality with bolts, nuts,

18.59 rubber insertions etc. complete (The tail

pieces, tapers etc if required will be paid

Providing push-on-joints to Centrifugally

(Spun) Cast Iron Pipes or Ductile Iron Pipes

including testing of joints and the costof

rubber gasket :

Providing and laying S&S Centrifugally Cast

18.72 (Spun) / Ductile Iron Pipes conforming to IS :

Providing and laying Double Flanged

(Screwed/ Welded) Centrifugally (Spun)

Ductile Iron Pipes of Class K - 9 conforming

Dismantling old C.I. pipes including

excavation and refilling trenches after taking

out the pipes, breaking lead caulked joints,

melting of lead and making into blocks,

including stacking of pipes at site lead up to

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Schedule 5A-(5)BSL FP- Replacement of old CI pipe line from loco tank to ZRTI. (ID

Item- 1 DSR 2023 items

S No. Item No Description of Item Unit Qty Rate Amount

18.0 WATER SUPPLY

18.23S C.I./DUCTILE IRON PIPES & SPECIALS

Providing and laying S&S C.I. standard

18.25 specials such as tees, bends, collars, tapers,

caps etc. (Heavy class):

Providing and laying flanged C.I. standard

specials such as tees, bends, collars, tapers,

caps etc., suitable for flanged jointing as per

C.I. SLUICE VALVES/ FIRE HYDRANTS &

Providing and fixing C.I. sluice valves (with

cap) complete with bolts, nuts, rubber

insertions etc. (the tail pieces if required will

be paid separately) :

18.31.4 200 mm diameter

18.59S AIR VALVE & WATER METER (BULK TYPE)

Providing and fixing C.I. double acting air

valve of approved quality with bolts, nuts,

18.59 rubber insertions etc. complete (The tail

pieces, tapers etc if required will be paid

Providing push-on-joints to Centrifugally

(Spun) Cast Iron Pipes or Ductile Iron Pipes

including testing of joints and the costof

rubber gasket :

Providing and laying S&S Centrifugally Cast

18.72 (Spun) / Ductile Iron Pipes conforming to IS :

Providing and laying Double Flanged

(Screwed/ Welded) Centrifugally (Spun)

Ductile Iron Pipes of Class K - 9 conforming

Dismantling old C.I. pipes including

excavation and refilling trenches after taking

out the pipes, breaking lead caulked joints,

melting of lead and making into blocks,

including stacking of pipes at site lead up to

Schedule 6A-(6)BSL FP-Replacement of rising main pipe line from new intake wll to new 20MLD

filter plant (ID No. 01.01.51.25.3.50.014)

Item- 1 DSR 2023 items

S No. Item No Description of Item Unit Qty Rate Amount

10.0 STEEL WORK

10.1S General

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Steel work in built up tubular (round, square

or rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position

and applying a priming coat of approved

steel primer, including welding and bolted

with special shaped washers etc. complete.

10.16.3 Electric resistance or induction butt welded Kg 2659 194.4 516909.6

18.0 WATER SUPPLY

18.23S C.I./DUCTILE IRON PIPES & SPECIALS

Providing and laying S&S C.I. standard

18.25 specials such as tees, bends, collars, tapers,

caps etc. (Heavy class):

18.59S AIR VALVE & WATER METER (BULK TYPE)

Providing and fixing C.I. double acting air

valve of approved quality with bolts, nuts,

18.59 rubber insertions etc. complete (The tail

pieces, tapers etc if required will be paid

Providing push-on-joints to Centrifugally

(Spun) Cast Iron Pipes or Ductile Iron Pipes

including testing of joints and the costof

rubber gasket :

Providing and laying S&S Centrifugally Cast

18.72 (Spun) / Ductile Iron Pipes conforming to IS :

Schedule 6B-(6)BSL FP-Replacement of rising main pipe line from new intake wll to new 20MLD

filter plant (ID No. 01.01.51.25.3.50.014)

Item- 1 NS items

S No. Item No Description of Item Unit Qty Rate Amount

1 NS-2 Providing and fixing CI Sluice valve of Each 3.00 343979.09 1031937.27

450mm dia- Product Standard : IS:14846,

Body Material Cum Std. : C.I. IS:210 GR FG:

200), Bolted bonnet inside Screw Non Rising

Stem, Renewable Seat, Solid Wedge, Cu-

alloy Seat, Stem SS (IS 6603) (12 Gr.13),

Flanges as per IS:1538 PN 1.6 F/F (Drilled),

ISI Mark, B.T.P. - 2.4 MPa Hyd, S.T.P. - 1.6

2 NS-4 Providing and fixing CI Non return valve of Each 2.00 498947.31 997894.62

450mm dia- Product Standard : IS5312, Body

Material Cum Std. : C.I. (IS210 : FG 200),

Product Description : Bolted Cover,

Renewable Seat, Renewable Disc, Trim : Cu -

alloy, Fastener : Carbon Steel (BS 916),

Gasket : Rubber, Flanges as per IS 1538 PN

1.6 FF (Drilled), B.T.P. - 2.4 MPa Hyd, S.T.P. -