Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.1 LAccepted-AOC | L1 | Accepted-AOC Awarded Being Lowest Bidder | |
| 2 | L2₹35.4 L+₹22,592.50 (0.64%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹37.6 L+₹2.5 L (7.15%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹37.8 L+₹2.7 L (7.68%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹38.3 L+₹3.2 L (9.03%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
1 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
Provision of 50 x toilet in Auto Regt ACCS Ahmednagar
2023_MES_573684_1
8701 / E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Ahmednagar
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer(North) Ahmednagar
₹76,000
Yes
23 Feb 2023
7 Jan 2023
3 Feb 2023
7 Jan 2023
1 Feb 2023
20 Jan 2023
Amount
(A) Building Works
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge
M&L for PCC 1:4:8 Type D2 (40mm graded aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed by Engineer-in-Charge
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6, etc complete all as specified and directed by Engineer-in-Charge
M&L for Brickwork with flyash bricks old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, etc complete all as specified and directed by Engineer-in-Charge
Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium anodised handles of extruded section 150mm long, etc complete all as specified and directed by Engineer-in-Charge
M&L for Moorum filling under floors or in foundation including watering and consolidation, etc complete all as specified and directed by Engineer-in-Charge
Material and labour for Hardcore of Broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, etc complete all as specified and directed by Engineer-in-Charge
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base, etc complete all as specified and directed by Engineer-in-Charge
Material and labour for non skid ceramic coloured tiles 8-10 mm thick (square / rectangular) area of each tile exc (300 x 300) mm, as in floor etc. laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match, etc complete all as specified and directed by Engineer-in-Charge
Material and labour for Glazed ceramic coloured tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. over and including 10 mm thick backing coat in cement mortar 1:4, etc complete all as specified and directed by Engineer-in-Charge
Rendering of 15 mm on fair faces of concrete block masonry in CM 1:6 and finished even and smooth with 3 mm thick Birla Putty, etc complete all as specified and directed by Engineer-in-Charge
Rendering 15 mm thick on fair faces of concrete in CM 1:4 and finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge
M&L for RCC (Nominal Mix) 1:2:4 type B-1 (20 mm graded stone aggregate) Band beam, etc complete all as specified and directed by Engineer-in-Charge
Use and waste for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engineer-in-Charge
M&L for PCC (1:2:4) type-1 20mm graded stone aggregate lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, etc complete all as specified and directed by Engineer-in-Charge
Material and labour for TMT bars 10mm dia bars, cut to length, bent to shape required including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not les than 0.90 mm dia, etc complete all as specified and directed by Engineer-in-Charge
All as per item No 21 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, etc complete all as specified and directed by Engineer-in-Charge
M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, etc complete all as specified and directed by Engineer-in-Charge
M&L for Preparation of newly plastered surfaces and applying three coats white wash on walls, etc complete all as specified and directed by Engineer-in-Charge
M&L for Preparation of newly plastered surfaces and applying two coats cement base paint over a coat of primer on walls, etc complete all as specified and directed by Engineer-in-Charge
M&L for Preparation of new steel or iron surfaces of any description otherwise described over 10 cm width and applying two coats of synthetic enamel paint over a coat of red oxide primer, etc complete all as specified and directed by Engineer-in-Charge
Returning, filling in including in spreading ,levelling, watering and well ramming in layers n. exc 25 cm in Rock, etc complete all as specified and directed by Engineer-in-Charge
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, etc complete all as specified and directed by Engineer-in-Charge
M&L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws, etc complete all as specified and directed by Engineer-in-Charge
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and directed by Engineer-in-Charge
S&F 3mm Fig glass, pain head type & glazing with oil putty in squares n.ex 0.5 sqm in each pain, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule, etc complete all as specified and directed by Engineer-in-Charge
Supply and fixing stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix rotational moulded polyethylene water storage tanks Triple layer (cylindrical vertical with closed top) of 2000 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting including float valve 20 mm bore, etc complete all as specified and directed by Engineer-in-Charge
S&F PVC connections 15 mm size with Stainless steel Nuts of length 600mm, etc complete all as specified and directed by Engineer-in-Charge
S&F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix PVC valveless, syphonic action type, flushing cistern, low level, all accessories, etc complete all as specified and directed by Engineer-in-Charge
S&L of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessary fittings, etc complete all as specified and directed by Engineer-in-Charge
All as per item No 39 above but 20mm outer dia etc complete all as specified and directed by Engineer-in-Charge
Supply and fixing Vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), etc complete all as specified and directed by Engineer-in-Charge
Supply and fix wash hand basin vitreous China size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap, etc complete all as specified and directed by Engineer-in-Charge
S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors, etc complete all as specified and directed by Engineer-in-Charge
S&F for 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors, etc complete all as specified and directed by Engineer-in-Charge
S&F for 110 bore PVC (SWR) bends any radius, etc complete all as specified and directed by Engineer-in-Charge
S&F for 75 bore PVC (SWR) bends any radius, etc complete all as specified and directed by Engineer-in-Charge
S&F for 110 mm bore PVC (SWR) branch piece, double (double Y), equal or unequal, etc complete all as specified and directed by Engineer-in-Charge
S&F for 75 mm PVC (SWR) vent cowl, etc complete all as specified and directed by Engineer-in-Charge
M&L for Wire netting of Stainless steel Size of mesh in 20 mm wire 1.40mm dia fixed with tinned tacks of wire staples, etc complete all as specified and directed by Engineer-in-Charge
B) Road path Culvert: Note :- Items of earthwork such as Hardcore & PCC (1:4:8) shall be measured under relevant items here-in-before.
Excavating over areas, n exc 1.5m deep and getting out in soft/loose soil, etc complete all as specified and directed by Engineer-in-Charge
M&L for Sand filling under floors or in foundation including watering and consolidation, etc complete all as specified and directed by Engineer-in-Charge
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, etc complete all as specified and directed by Engineer-in-Charge
(C) Sewage disposal Note :- Items of PCC (1:4:8), returning, filling, removing excavated material and brickwork shall be measured under relevant items here-in-before.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in Soft/loose soil, etc complete all as specified and directed by Engineer-in-Charge
M&L for PCC 1:3:6 Type - C1 using 20 mm graded aggregate as in surface channel, benching in manhole, etc complete all as specified and directed by Engineer-in-Charge
M & L for Rendering 10 mm thick in cement mortar 1:4 surface finished even and smooth with setting coat on fair faces of brickwork or concrete surfaces, etc complete all as specified and directed by Engineer-in-Charge
M&L for RCC pre cast manhole cover slab in 1:2:4 type -B1 using 20 mm aggregate incl necessary form work and set in CM 1:6, cover slabs (for man holes etc.) , etc complete all as specified and directed by Engineer-in-Charge
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc etc complete all as specified and directed by Engineer-in-Charge
M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars 150 mm bore pipes, etc complete all as specified and directed by Engineer-in-Charge
M&L for Concrete bed Cement concrete 1:3:6 type C-2 (40 mm graded stone aggregate) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in for 150 mm bore pipe, etc complete all as specified and directed by Engineer-in-Charge
(D) External water supply : Note :- Items of earthwork such as excavation and removing shall be measured under relevant items here-in-before.
Returning, filling in excavated material (soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm, etc complete all as specified and directed by Engineer-in-Charge
Cutting or drilling and tapping cast iron / ductile iron pipes upto 80mm to 200 mm dia for taking out branch connection up to 80 mm dia GI Pipe including inserting new CI/GI tee etc. complete all as specified and as directed including Exc & earth work, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix GI pipes, medium grade including necessary fittings such as sockets, elbows, tees, reducers, unions, nipples etc. laid in trenches / walls / floors etc. for the 50 bore pipe, etc complete all as specified and directed by Engineer-in-Charge Make:- Tata/ Swastik/ suryaprakash/ Jindal
All as per serial item No 69 above but 25mm bore pipe, etc complete all as specified and directed by Engineer-in-Charge Make:- Tata/Swastik/suryaprakash/Jindal
Material and labour in repairs gun metal gate valve/brass stop valve, high pressure both ends screwed down with crunch or butterfly handle with suitable size sockets on both ends nipples, unions, etc. suitable for up to 50 mm bore GI pipe, etc complete all as specified and directed by Engineer-in-Charge MAKE: ZOLOTO/ BIR/ KIRLOSKAR
All as per serial item No 71 above but 25mm bore, complete all as specified and directed by Engineer-in-Charge MAKE: ZOLOTO/ BIR/ KIRLOSKAR
S& F in repairs high pressure brass valve with PVC ball suitable for fixing to GI pipe of 25 mm dia all as specified
Dismantling old valve chamber & M & L for Construction of PCC solid block valve chamber including earth work described as under etc complete all as specified for the following internal size as under : Internal Dimension 1500 mm x 1200 mm x 1000 mm (a)100 mm thick hard core, (b)PCC foundation 1:4:8 type D2 (using 40 mm graded stone aggregate) (c) 200 mm thick block masonry graded C-5 built in CM 1:6, (d)15 mm internal and external plaster in CM 1:4, (e)3mm thick MS sheet chamber cover and 50 x 50 x 6 mm thick angle iron frame including painting with two coats of synthetic enamel paint over one coat of red oxide primer on all exposed surface including locking arrangements.
(E) Internal Electric Supply : Note :- Items of earthwork such as excavation, returning filling & removing shall be measured under relevant items here-in-before.
M&L for point wiring complete Concealed type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl Concealed wiring with its accessories with provn of PVC boxes and fixed with brass screws cup washer for fixing switches/socket/regulators etc. incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, complete all as specified and directed by Engineer-in-Charge Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, bulkhead lights, bldg security light etc. MAKE for FRLSH Cable is :- Havells/KEI/Anchor
One light point controlled by switch 5 Amp single pole one way , complete all as specified and directed by Engineer-in-Charge
One fan point controlled by switch 5 Amp single pole one way , complete all as specified and directed by Engineer-in-Charge
S&F switch piano flush type single pole, one way 5/6 Amp etc., complete all as specified and directed by Engineer-in-Charge
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc. complete all as specified and directed by Engineer-in-Charge
M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc. complete all as specified and directed by Engineer-in-Charge
S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 4 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc., confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management, Fully shrouded Neutral bars, Prefitted masking sheet, complete all as specified and directed by Engineer-in-Charge. Make: Siemens/ Havells/ L&T
S & F in replacement double door Sheet metal enclosures factory made DBs TPN, 4 way ,415 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc., confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management, Fully shrouded Neutral bars, Prefitted masking sheet , complete all as specified and directed by Engineer-in-Charge. Make: Siemens/ Havells/ L&T
Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc. complete all as specified and directed by Engineer-in-Charge, Make: Siemens/ Havells/ L&T
Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc. complete all as specified and directed by Engineer-in-Charge Make: Siemens/ Havells/ L&T
Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc. complete all as specified and directed by Engineer-in-Charge Make: Siemens/ Havells/ L&T
S&F sub main wiring with two single core PVC insulated, unsheathed, FRLSH stranded copper conductor cable 4 Sqmm with 2.5 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including Concealed wiring with its all necessary accessories and earth wire connected to common earth dolly etc. complete all as specified and directed by Engineer-in-Charge MAKE for FRLSH Cable is :- Havells/KEI/Anchor Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 2.5 Sqmm cable for earth and one run of shall be measured as one unit
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using graded stone aggregate and RCC pit cover 50 mm thick precast RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc. complete all as specified and directed by Engineer-in-Charge.
M & L for Supply, laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armoured with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminium conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :- (a) LT cable10 Sqmm, 4 core. MAKE for Cable is :- Havells/KEI/Anchor
Supply &lay HDPE pipe 40 mm bore for laying of LT cable complete with all accessories etc. complete all as specified and directed by Engineer-in-Charge. Make:- Finolex/Prince/Supreme/Jain
Supply and fix exhaust fan, steel body AC Single phase,230 V of size 300 m sweep with ,blades and frame and louvers 450 mm sweep heavy duty , complete all as specified and directed by Engineer-in-Charge. Make:-Havells/Crompton/Bajaj
Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening separate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc. complete all as specified and directed by Engineer-in-Charge. MAKE:- Havells/Philips/Wipro
S&F LED Lamp 9 Watt inverter type Suitable for "B-22 type to fix on batten holder and wall light, complete all as specified and directed by Engineer-in-Charge
M/s. A P INFRA
M/s Automech Engineering
MS. G.A. CONSTRUCTION
M/s AG PATHAN
Ms. M.D. Auty
MS. A.S. CONSTRUCTION
M/s. N D Karande
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .