REPAIR OF SOFA SET, POLISHING TO WOODEN FURNITURE AND PAINTING TO STEEL FURNITURE ISSUED TO OTM AND MD ACCN UNDER GE (EAST) LUCKNOW

Amount

Sofa Set 5 pieces (FD-18m, FD-234) Repairs to upholstry of Sofa Set 5 pieces, consisting of a 2 pieces with arms and 3 pieces without arms by removing existing upholstry replacing of all unserviceable materials, viz, tapastry, springs, coir fibre, hessain cloth, long cloth, cotton, cane sticks ete, if any to restore the set all as per drg (Serviceable coir fibre, cotton, cane sticks, spring etc retrived shall be reused, but the acrylic tapastry shall be new costing minimum of Rs.350/- per RM width not more than 1.25 metre), complete all as shown on drg and as directed.

Sofa Set 4 pieces (FD-18m, FD-234) Repairs to upholstry of Sofa Set 4 pieces, consisting of a 2 pieces with arms and 2 pieces without arms by removing existing upholstry replacing of all unserviceable materials, viz, tapastry, springs, coir fibre, hessain cloth, long cloth, cotton, cane sticks ete if any to restore the set all as per drg (Serviceable coir fibre, cotton, cane sticks, spring etc retrived shall be reused, but the acrylic tapastry shall be new costing minimum of Rs.350/- per RM width not more than 1.25 metre), complete all as shown on drg and as directed.

SOFA SET 4/5 PERSON WITH CUSHION (FD-281, FD-373) Replacement of existing U/S cushion of Sofa Set with new foam cushion 40 density 100mm thick of Duroflex/Sleepwell make duly covered with tapestry cloth including mulmul cloth and stitching, rest all as shown on drg and as directed. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be mat finish and shall not less than Rs. 450/- per metre width not less than 1.25 metre and as approved by GE. The cover will be stitched on three sides and one side fitted with good quality Zip.

Removing the existing unserviceable front leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed

Removing the existing unserviceable rear leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed

Removing existing unserviceable Arm rest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed

Removing existing unserviceable side rail from Sofa and providing new first class teak wood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg and as directed

Removing existing unserviceable bearer from Sofa and providing new first class teak wood bearer of size 40mm x 40mm x 725mm, rest all as shown on drg and as directed

Removing existing unserviceable battens from Sofa and providing new first class teak wood battens of size 50mm x 20 mm, rest all as shown on drg and as directed

Removing existing unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed

Removing existing unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 10mm x 530 mm, rest all as shown on drg and as directed.

M&L for preparation of old wood surfaces by completely taking down/removing the old polish, scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two or more coats of Melamyne polish using gun spray (Mohogini/Walnut color) till the required finish is achieved all as specified on drawing or as directed for the following furniture articles:- Sofa chairs (Each chair will measured single unit) (FD-281, FD-373)

Sofa set 3 seater (Each seat will measured single unit)

Chair Spl with hand rest wooden

Chair Spl With Hand Rest Wooden Opening out of joints & removing cane and S&F front leg (Left or Right) side made of seasoned teak wood as per shape and size in respective drgs of the existing chair spl wooden all as specified and directed.

All as per Item No 5 above but rear legs (Left or Right side)).

Opening out of joints & removing plywood seat and S&F front, rear and side (Left or Right) member of seat top and bottom made of seasoned teak wood as per shape & size in respective drawing of the existing chair Spl wooden all as specified.

Opening out joints and S&F of back stiffener member made of seasoned teak wood as per shape & size in respective drawing of the existing chair Spl wooden all as specified.

Removing old ply bottom shelf from chair Spl wooden and S&F new ply bottom shelf of 6mm thick commercial BWR grade ISI marked with screws as per shape & size in respective drawing and all as specified.

Recaning of repaired Chair Spl with hand rest wooden with best quality of approved plastic cane 1.80 x0.46mm cane and border with 3x0.60mm cane of white or cream/ivory all as specified on drawing all as specified on drawing or as directed.

Opening out old unserviceable hand rest of chair spl with hand rest wooden and S&F new hand rest made out of prelaminated particle board 18mm thick of reqd shape and size around the beading and finished with french polish two or more coat to achive good finish after preparing well smooth surface all as specified and directed.

Chair Spl with hand rest steel Opening out old unserviceable seat and S&F new seat suitable for chair spl steel with hand rest size as required made of seasoned teak wood duly canned with half round 2mm cane plastic of approved quality and duly polished with sprit polish two or more coat to achieve good finish after preparing well smooth surface of frame all as specified and directed

Opening out old unserviceable back and S&F new back suitable for chair spl steel with hand rest size as required made of seasoned teak wood duly canned with half round 2mm cane plastic of approved quality and duly polished with sprit polish two or more coat to achieve good finish after preparing well smooth surface of frame all as specified and directed.

Opening out old unserviceable hand rest of chair spl steel and S&F new hand rest made out of prelaminated particle board 18mm thick of reqd shape and size around the beading and finished with french polish two or more coat to achive good finish after preparing well smooth surface all as specified and directed

Removing the existing unserviceable Rear leg (Left or Right) side of chair spl with hand rest steel and providing with new right rear leg made out of 25 mm square shape MS tube including welding to the chair spl steel with hand rest & applying two coats of Green/olive green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified on drawing or as directed.

Removing the existing unserviceable Front leg (Left or Right) side of chair spl with hand rest steel and providing with new front leg made out of 25 mm square shape MS tube including welding to the chair spl steel with hand rest & applying two coats of Green/olive green synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete all as specified on drawing or as directed.

S&F Hard rubber shoes as per drg for following items of furniture: Chair Spl with hand rest steel, Chair Spl With Hand Rest Wooden

Repair of sofa set 5 seater Spl type Removing of UNSV /wornout rexine and fixing New superiior quality rexine including repair of all parts of sofa set, replacement of unserviceable cushion with 40 density sleepwell/kurlon (Gold line), springs

Repair of sofa set 4 seater Spl type Removing of UNSV /wornout rexine and fixing New superiior quality rexine including repair of all parts of sofa set, replacement of unserviceable cushion with 40 density sleepwell/kurlon (Gold line), springs

Replacement of UNSV Cushion cover S&F new cushion cover duly stitched three sides and one side provided with good quality Zip. (The cost of tapestry cloth should not be less than Rs 450 per meter) The shade and quality of cloth shall be approved by GE

M&L for removing the exisiting old worn out polish completely, making surface by scraping and filling the uneven surface and applying two or more coats of Melamine polish upto the required high gloss to the Book case wooden drg No FD-237.

All as per item ser No 11 above but Bed ply top drg No FD-246.

All as per item ser No. 11 above but Chair writing drg No FD-280.

All as per item ser No. 11 above but Chair Dining drg FD-279

All as per item ser No. 11 above but Chair easy drg FD-229.

All as per item ser No. 11 above but Hat stand with mirror drg FD-233.

All as per item ser No. 11 above but Side board drg FD-26M.

All as per item ser No. 11 above but Stool Dressing drg FD-282.

All as per item ser No. 11 above but Table 3'x2' with or without drawers drg FD-282/FD-231/283/284.

All as per item ser No. 11 above but Table 3'x3' drg FD-291.

All as per item ser No. 11 above but Table 5'x2'-10".

All as per item ser No. 11 above but Table dining 6/8 persons drg FD-273 & FD/MAP-II/03.

All as per item ser No. 11 above but Table peg drg FD-277 & FD/MAP/11.

All as per item ser No. 11 above but Teapoy drg FD-278/382/282.

All as per item ser No. 11 above but Table dressing ladies with mirror drg FD-32M & FD/AP-II/07..

All as per item ser No. 11 above but Table dressing gents with mirror drg.

All as per item ser No. 11 above but Table centre drg FD-274.

All as per item ser No. 11 above but Table writing drg FD-275.

All as per item ser No. 11 above but Almirah med 1/2hx1/2s, with shelves (wooden) drg .

All as per item ser No. 11 above but Table dining 4'x3', wooden drg .

All as per item ser No. 11 above but Table Office Clerk Wooden', drg .

All as per item ser No. 11 above but Table Office officer Wooden, drg .

Applying one coat of Smoke Grey synthetic enamel paint, internally and hammer tone three sides externally except doors, the doors should be painted with maroon colour synthetic enamel paint externally by spary gun over a coat of red oxide primer including necessary preparation of sufraces after repairing the denting, deshaped portion, derusting and cleaning of rusted sufraces completely by using grinder and sand papering including preparation of patches by applying putty etc to the following steel items/articles :- (Make of paint :- Nerolac/Berger/Asian) (a) Locker Bed side steel complete all as specified and shown on drg FD-1035/1029.

All as per item ser No. 33 above but Almirah large 1/2 hanging 1/2 shelves with shelves & Almirah glazed drg.

All as per item ser No. 33 above but Almirah small/medium with shelves drg .

All as per item ser No. 33 above but Rack Towel Steel drg No FD-165M.

All as per item ser No. 33 above but Rack Shoe Steel drg No FD-E6/MAP/02 (R).

m/s tripurari enterprises

ASHOKA FURNITURES

GUJRAL BUILDERS

M/S CHANDER SHEKHAR

Shivam Enterprises