Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹11.3 LAccepted-AOC AT BRAHMAN SASAN PO TALCHER DIST ANGUL ODISHA 759102 | TALCHER | ANGUL | ODISHA | 759102 | L-1 | Accepted-AOC ACCEPTED AND AWARDED BY COMPETENT AUTHORITY | |
| 2 | L-2₹11.6 L+₹30,254.85 (2.68%)Rejected-Finance AT ITI CHHAK IN FRONT OF SAI MANDIR TALCHER DIST ANGUL ODISHA P O 759100 | TALCHER | ANGUL | ODISHA | 759100 | L-2 | Rejected-Finance SINCE THE BIDDER IS NOT L-1 | |
| 3 | L-3₹11.7 L+₹45,734.50 (4.06%)Rejected-Finance AT PO REMUAN TALCHER DIST ANGUL ODISHA 759100 | TALCHER | ANGUL | ODISHA | 759100 | L-3 | Rejected-Finance SINCE THE BIDDER IS NOT L-1 |
Tender Value
₹10.3 L
EMD Value
₹12,900
Closing Date
19 Jan 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO EnM LINGARAJ AREA
OFFICE OF THE GENERAL MANAGER, LINGARAJ AREA, AT/PO- DEULBERA COLLIERY, DIST- ANGUL, ODISHA, 759102
Temporary shifting/diversion of 11KV Overhead Line of M/s TPCODL from Narharipur / Ambamunda underpass towards east to the other side of existing Coal corridor road and Dismantling of existing 11KV OH line for expansion of Lingaraj OCP mines in North
2023_MCL_266848_1
GM/LA/SO/EnM/e-Ten/22-23/44 DT-07.01.23
Open Tender
Miscellaneous Works
Item Rate
15 days
LINGARAJ AREA
AS PER NIT
4 documents required · 4 mandatory
₹12,900
22 Jan 2023
9 Jan 2023
20 Jan 2023
9 Jan 2023
19 Jan 2023
9 Jan 2023
9 Jan 2023 - 12 Jan 2023
Amount
Supply of WPB 160 X 152 (11 Mtr long pole, 30.44 kg/Mtr)
Erection of Metallic pole of following length in cement concrete 1:3:6( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required. Above 8.0 mtrs. And upto 11.0 mtrs.
Supply and erection of galvanized stay set for 11 KV overhead lines complete with 19/20 mm dia x 1.8 mtr long stay rod ,anchor plate of size 45 cm x 45cm x7.5mm thick, thimble ,stay clamps , turn buckle(20mm x 600mm), 7/4.00mm dia G.I. stay wire and 11KV strain insulator etc in cement concrete 1:3:6(1 cement:3 coarse sand : 6 grade stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Earthing with G.I. earth pipe 3.0 Mtr long, 40mm dia., including accessories and providing masonary enclosure with cover palte having locking arrangement and watering pipe etc. with charcoal /cock and salt etc., as required.
Supply of two lengths of 3mtrs MS channel 100mm x 50mm x 6mm(9.56kg/mtr.) double pole cross arm for three wire 11KV OH line conductors complete with through bolts & nuts for clamping to the poles, 50mmx 6mm MS flats welded on one side to the MS channel and with bolts & nuts on other side for tying the cross arms together , including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required.( DP with AB switch).
Supply of two lengths of 3mtr long MS channel 75mm x 40mm x 6mm(7.14kg/mtr.) AB Switch mounting channel with through bolts & nuts for clamping to the poles, 50mmx 6mm MS flats welded on one side to the MS channel and with bolts & nuts on other side for tying bthe cross arms together , including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required.( Dp with AB switch).
Supplying and erection of a set of cross bracing frame work for 11 kv overhead line double pole structure having four members fabricated out of 50mm x 50mm x 6mm MS angle of 3.512Mtr long to form a rectangle of minimum size 3.512mtr height, complete with 50mm x 6mm MS flat clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as req.( DP with AB switch cross bracing).
Supply of fish plate.
Supply of 0.35mtrs MS channel 100mm x 50mm x 6mm(9.56kg/mtr.) straight cross arm for 11KV cut point with 180 degree and 90 degree angle complete with 50mmx 6mm MS flats with clamps, bolts and nuts including drilling holes for AB switch side support.
Supply of one 0.8mtr G.I. channel 75mm x 40mm x 6mm(7.14kg/mtr.) support for double pipe with through bolts & nuts for clamping to the poles, 50mmx 6mm G.I flats welded on one side to the G.I channel and with bolts & nuts on other side for tying the cross arms together , including drilling holes for insulator pins/fittings,G.I. bolts,nuts & washers and painting with primer and finish paint as required.( Support channel for GOAB down pipe).
Erection of double pole 03 wire cross arm for 11/22/33 KV O/H line etc. as required.
Supply & erection of Danger Plate (H.T & L.T.).
Supply & Erection of G.I. barbed wire with Anticlimbing device
Supply & Erection of three piece non linear resistor type lightining resistor suitable for 3 wire,12 KV (10KA) O/H lines with rated voltage KV (rms) with a nominal discharge current rating 10 KA and complete with galvanised clamping arrngement, G.I bolts,nuts,washers etc. as reqd .
Supply of 11KV 400 AMP single break GOAB switch etc as reqd.
Installation & Commissioning of 11KV GOAB switch.
Supply and erection of 11KV polymer pin insulator complete with large steel head G.I. pin , nuts, Washers etc as required.
Supply and erection of 11 KV polymer disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
Supply of 80 Sq.mm AAAC conductor..
Erection of AAA conductor of 7/3.35 mm to 7/4.00 mm diameter including binding etc as reqd. 1.55 KM X 218.26 Kg per KM)
Supply & Erection of PG Clamp (For 80sqmm AAA conductor)
Supply of G.I Nut & Bolts etc as reqd.
Supply & Painting of Black & Yellow Colour
Supply of two lengths of 1.2mtr MS channel 100mm x 50mm x 6mm(9.56kg/mtr.) double pole cross arm for three wire 11KV OH line conductors complete with through MS bolts & nuts for clamping to the poles, 50mmx 6mm MS flats welded on one side to the MS channel and with bolts & nuts on other side for tying the cross arms together , including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required.( 11 KV cut point with 180 Degree and 90 Degree angle).
Supply & Fixing of Earthing of support coil type.
Supply of 8 SWG G.I. wire.
Erection of G.I. wire including binding etc as required.
Supplying of MS channel 75mm x 40mm x 6mm (7.14 Kg per metre) V shape cross arm for two11 KV overhead line conductors complete with 50 mm x 6 mm MS flat clamps,bolts & nuts including drilling holes for insulator pins, bolts, nuts & washers etc(as per drawing) and painting with primer and finish paint as required.
Supplying of GI channel 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm GI flat clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.
Erection of pole top/straight two wire v shape two wire angle iron/channel iron cross arm on steel tubular/rail/P.C.C for 11/22/33 KV etc. as required.
Transportation Charges
Dismantling of over head lines comprising of copper/ alluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.
Muffing of poles etc. as reqd.
Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.
Total impact of GST for the purpose of CTC
M/s Santoshi Maa Industries
MESSERS UTKAL ELECTRICALS
stage.html
html • 0.04 MB
techsummary_276073.pdf
PDF • 0.22 MB
finsummary_276073.pdf
PDF • 0.22 MB
LOA44.pdf
PDF • 0.28 MB
finance_276073.pdf
PDF • 0.19 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .