CA NO. CWE SGNR - 44 OF 2020-21 SPECIAL REPAIRS TO BUILDING NO. P-793 (OTM ACCOMMODATION) AT MILITARY STATION SRI GANGANAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Chage.

M&L 450x300x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including 10mm backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Chage.

M & L machine cut kota stone slab flooring 18-20mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Chage.

M & L machine cut kota stone slabs as in vertical surfces such as risers of steps 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges including 10mm of backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Chage.

M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 15mm screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Chage.

M & L granite (of any type) work 20 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Chage.

Demolition of cement concrete unreinforced in ground floors and pavings not exc 15 cm thickness (below or above GL) complete all as specified and directed by Engineer-in-Chage.

M&L 25 mm thick cement concrete flooring type B0 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all as specified and directed by Engineer-in-Chage.

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate finishing the concrete surface even and fair complete all as specified and directed by Engineer-in-Chage.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Chage.

M&L precast machine pressed rubber moulded concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of 60 mm thickness, M 35 grade with grey cement & pigment complete all as specified and directed by Engineer-in-Chage.

M & L 75mm thick cement concrete type C2, 1:3:6 using 40 mm graded aggregate finished even and smooth as in plinth protection complete all as specified and directed by Engineer-in-Chage.

Dismatiling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engineer-in-Chage.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed by Engineer-in-Chage.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed by Engineer-in-Chage.

M&L Polythelene film , 150 micron thick, laid on a coat of bitumen primer , @ 0.30 to 0.50 kg per sqm complete all as specified and directed by Engineer-in-Chage.

M & L for 80mm thick (average) lime concrete terracing with top surface trowelled smooth complete all as specified and directed by Engineer-in-Chage.

M&L 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on 15mm thick layer of CM 1:6 bedding complete all as specified and directed by Engineer-in-Chage.

All as per Srl item No. 18 here-in-before but for except brick tiles complete all as specified and directed by Engineer-in-Chage.

Dismantling of sub class B brick old size work built in cement mortar complete all as specified and directed by Engineer-in-Chage.

M&L Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed by Engineer-in-Chage.

All as per Srl item No. 21 here-in-before but for except bricks complete all as specified and directed by Engineer-in-Chage.

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Chage.

M&L rendering 15 mm thick in CM (1:6) finished even and smooth without using extra cement as on brick work surfaces complete all as specified and directed by Engineer-in-Chage.

M&L 15mm thick rendering in CM 1:4 to brick/concrete wall surfaces finished even & smooth w/o using extra cement complete all as specified and directed by Engineer-in-Chage.

M&L, 5 mm thick rendering in CM 1:3 on fair faces of concrete surfaces as in ceillings.finished even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Chage.

M&L two coats of distemper oil emulsion over a coat of chalk whiting to newly plastered wall surfaces including preparation of surface complete all as specified and directed by Engineer-in-Chage.

M&L two coats of cement base paint over a coat of white wash of new surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Chage.

M&L three coats of white wash to new surfaces on ceilings including preparation of surface complete all as specified and directed by Engineer-in-Chage.

M&L one coat of white wash to old decorated surfaces on ceilings including preparation of surface complete all as specified and directed by Engineer-in-Chage.

M&L two coats of oil distempering over old decorated surfaces of wall putty after complete removal of existing treatment including preparation of surface complete all as specified and directed by Engineer-in-Chage.

M&L two coats of cement base paint over primer on old decorated surfaces of walls after complete removal of existing treatment including preparation of surface complete all as specified and directed by Engineer-in-Chage.

M&L one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed by Engineer-in-Chage.

M&L one coat of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed by Engineer-in-Chage.

M&L two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Chage.

M & L for stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete con- forming to Fe 410W E-250 A quality complete all as specified and directed by Engineer-in-Chage.

M&L, two coats of synthetic enamel paint over a coat of red oxide on steel surface over 10 cm width or girth, not otherwise described including preparation of new surface complete all as specified and directed by Engineer-in-Chage.

Taking down chowkhats or frames without taking off shutters exc 1.5 Sqm but n exc 4 sqm each complete all as specified and directed by Engineer-in-Chage.

Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engineer-in-Chage.

Taking down shutters and refixing in same opening of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by Engineer-in-Chage.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified and directed by Engineer-in-Chage.

All as per Srl item No. 41 here-in-before but for without glazing bars complete all as specified and directed by Engineer-in-Chage.

S & F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engineer-in-Chage.

M & L for PCC 1:3:6 type C1 filling of pressed steel frame and hold fast block etc complete all as specified and directed by Engineer-in-Chage.

S & F 35mm thick glazed and skeleton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) in 2nd class hard wood complete all as specified and directed by Engineer-in-Chage.

S & F Factory made 35mm thick plain,IInd class H/W framed, panelled shutters (any No. of panels), with panels of timber flat on both sides (feather edged)or of veneered particle board medium density, wood particle board with commercial face veneers, 2nd class hard wood complete all as specified and directed by Engineer-in-Chage.

M & L anodised aluminium frames for doors, windows with one or more rebates including jointing cleats for fixing etc. complete all as specified and directed by Engineer-in-Chage.

S & F anodised aluminium windows and ventilator shutters, side hung type, without sash bars aluminium section weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stay 150mm long (1 No.) hinges type B21 100 mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed by Engineer-in-Chage.

S&F for galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.00mm complete all as specified and directed by Engineer-in-Chage.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane in hacking out old glasses complete all as specified and directed by Engineer-in-Chage.

S&F4 mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.50 sqm each complete all as specified and directed by Engineer-in-Chage.

S&F 250 mm mild steel barrel tower bolts, stove enamelled black with bright bolt & fixed complete all as specified and directed by Engineer-in-Chage.

S & F 150mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed by Engineer-in-Chage.

S & F in repair 150mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed by Engineer-in-Chage.

S&F 300 mm mild steel sliding door bolts, clip type, stone enameled black with bright bolt not less than 12mm dia with minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer-in-Chage.

S&F 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Chage.

S&F fiber glass reinforced plastic (FRP) Door frames of three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame molded with fire retardant grade unsaturated polyster resin and chopped mat. door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiberglass from all sides. M S stay shall be provided at the bottom to steady the frame complete all as specified and directed by Engineer-in-Chage.

S&F 30mm thick fiber glass reinforced plastic (FRP paneled Door Shutter of required colour and approved brand and manufacture made with fire-retardant grade unsaturated polyster resin. Moulded to 3mm thick FRP laminate for forming places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and conforming to IS 14856-2000 complete all as specified and directed by Engineer-in-Chage.

S & F for butt hinges “medium weight” 100mm size cold rolled mild steel complete all as specified and directed by Engineer-in-Chage.

S&F 100 mm aluminium barrel tower bolts, stove enamelled black with bright bolt & fixed complete all as specified and directed by Engineer-in-Chage.

S & F 200mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Chage.

S&F in repair, vitreous china squatting pan "ORISSA" pattern white, of size 580x440mm with integral foot rest, CI 'P' trap etc complete all as specified and directed by Engineer-in-Chage.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement, (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed by Engineer-in-Chage.

S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern, white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed by Engineer-in-Chage.

Supply & fixing vitreous china bowl urinal half stall type (minimum) with grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, 32mm dia full threader PTMT waste coupling and 32 mm dia waste pipe and pointing around urinal back in cement mortar, including urinal spreader of PTMT suitable for fixing with 15mm dia pipe and including push tap high pressure of PTMT screwed for iron pipe 15mm bore (Minimum weight 47 gms) complete all as specified and directed by Engineer-in-Chage.

M & L for urinal partitions slabs terminating about 40cm above floor line complete all as specified and directed by Engineer-in-Chage.

S&F Shelf of Chromium plated brass fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engineer-in-Chage.

S&F for brass chromiium plated tubular towel rail 20mm dia, D type, 60 cm Long between flanges complete all as specified and directed by Engineer-in-Chage.

Taking up or down 15mm dia, steel tubing & connections including cleaning for refining or removal to store complete all as specified and directed by Engineer-in-Chage.

Taking up or down 20mm dia, steel tubing & connections including cleaning for refining or removal to store complete all as specified and directed by Engineer-in-Chage.

Taking up or down 25mm dia, steel tubing & connections including cleaning for refining or removal to store complete all as specified and directed by Engineer-in-Chage.

S&F steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Chage.

All as per Srl item No. 73 here-in-before but for fixing only 15mm dia retrieved GI tubing after cleaning fixed with new fittings complete all as specified and directed by Engineer-in-Chage.

S&F steel water tubing galvanised 20mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer-in-Chage.

All as per Srl item No. 75 here-in-before but for fixing only 20mm dia retrieved GI tubing after cleaning fixed with new fittings complete all as specified and directed by Engineer-in-Chage.

S&F steel water tubing galvanised 25mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer-in-Chage.

All as per Srl item No. 77 here-in-before but for fixing only 25mm dia retrieved GI tubing after cleaning fixed with new fittings complete all as specified and directed by Engineer-in-Chage.

S&F15mm Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed complete all as specified and directed by Engineer-in-Chage.

S&F 15 mm dia Angle stop valves, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron and fixed complete all as specified and directed by Engineer-in-Chage.

S&F 20 mm dia stop valves, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron and fixed complete all as specified and directed by Engineer-in-Chage.

S&F in repair 15mm Bib taps cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Chage.

M&L CI floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed by Engineer-in-Chage.

S&F 15mm bore swivel joint shower rose of Chromium plated brass 125mm size complete all as specified and directed by Engineer-in-Chage.

S&F grating doom 100 mm dia of Chromium plated brass complete all as specified and directed by Engineer-in-Chage.

S & F high density polythylene pipe(HDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls ceiling or in floors etc bore of pipe 32mm complete all as specified and directed by Engineer-in-Chage.

Supply and fix in repairs pillar tap, cast copper alloy with capstan heads 15 mm bore fancy type CP screwed down high pressure with out letter 'Hot or Cold' with long screwed shanks fly nuts screwed for iron pipe for union and complete all as specified and directed by Engineer-in-Chage.

S & F in repairs for PVC waste pipe of bore of 32/40 mm complete all as specified and directed by Engineer-in-Chage.

Suuply and fix in repairs vitreous china wash hand basin white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold'' with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 600mm long PVC connection of 15mm size with PTMT nuts and 32mm dia waste pipe complete all as specified and directed by Engineer-in-Chage.

Supply and fix in repairs PVC connections 15mm size with PTMT nuts, 600mm long complete all as specified and directed by Engineer-in-Charge.

Dismantling water tank capacity 1000 ltr complete all as specified and directed by Engineer-in-Charge.

S&F rotational molded polythylene water storage tank (three layers) 1000 ltr capacity (Cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed by Engineer-in-Charge.

Taking down eaves gutter or rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. complete all as specified and directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to wall with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC (1:2:4) type B0 complete all as specified and directed by Engineer-in-Charge.

S&F 110mm bore Door type PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

Dismentling cast iron work of any description complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm bore cast iron (sand cast) soil waste and vent pipes in any length with or without ears with lead joints fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore cast iron soil (sand cast) waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F cast iron bends 100 mm dia (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

S&F cast iron bends 75 mm dia (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

S&F drapery curtain rod 25mm dia, fancy type, fabricated out of mild steel sheet not less than 20 gauge, including brackets and pair of decorated end knobs (finials), stop roller etc, pretreated power coated natural color complete all as specified and directed by Engineer-in-Charge.

M&L for Water proofing treatment to RCC sunken Slab as specified below complete all as specified and directed by Engineer-in-Charge:- (A) 15mm plaster in cm 1:3 With Water Proofing Compound on raised verticle surface (B) Cleaning the surface with wire brush / coir brush , removing lose material like dust particles dirt etc (C) creating fillet covering of 50X 50 mm with polymer modified mortar on the junction of slab and walls (D) Apply first coat of two component modified polymer coating on the horizontal and Verticale surface (E)Provision of glass fiber mesh of 2X2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 Hrs (G) Laying concrete 1:4:8 over the coating as per requirment (H) joining the saintary pipes with the water proofing tape having bridgingability of more than 1.5mm (I)Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout (K) Complete the treatment to be carried out by authorised applicator of water proofing manufacturer . Make-DR . Fixit / F osoc / BASF / STP

M&L cement concrete 1:5:10 Type E2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Dismantling of galvalume aluminium (corrugated/plain) sheet in roof covering complete all as specified and directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S & F for soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed by Engineer-in-Charge.

Taking down existing rolling shutter of any size description incldung top cover, anchoring rod hasp & staple complete push pull manual or bevel gear box and crank handle type and refixing the same in the same opening or any other opening complete all as specified and directed by Engineer-in-Charge.

S&F Ball bearing for rolling shutters complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer-in-Charge.

M & L for concealed existing conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in PVC existing Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , and sinking's for new sunken cast iron/ pressed steel terminal boxes 60mm deep , switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 112 here-in-before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 112 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 112 here-in-before but for one switch socket combination 3 pin 15 Amps on independent board with 2.5 Sqmm copper cable complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 112 here-in-before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer-in-Charge.

S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer-in-Charge.

S & F switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed by Engineer-in-Charge.

S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer-in-Charge.

S & F switch socket combination 6 Pin, 15/16 Amps flush type complete all as specified and directed by Engineer-in-Charge.

S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fix Industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed by Engineer-in-Charge.

S & F ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed by Engineer-in-Charge.

S & F in replacement of existing light fitting with LED batten with aluminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and date of fixing. Make : Havells Cat Part No: LUMILINEPLUSBS20WLED865SPCSS, Bajaj Cat Part No. : BCLSBAL 20W CW, Crompton Cat Part No. : CCS-100-20-65-HL2-DP-NWH or as approved by GE

S&F in replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer-in-Charge Note : All LED lights should be marked with GE SGNR and date of fixing. Make : Havells Cat Part No. : ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj Cat Part No. : BRLEP 25W LED WH, Crompton Cat Part No. : LSTS-25-CDL-M or as approved by GE

S & F in replacement angle holder insulated body with back plate for conduit fittings including LED bulb 9 W complete all as specified and directed by Engineer-in-Charge.

S & F in replacement Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED lamp complete all as specified and directed by Engineer-in-Charge Note : All LED lights should be marked with GE SGNR and date of fixing. Make : Havells Cat Part No. : HEXAFT10WLED857SSYMBOPC, Bajaj Cat Part No. : BIBWP 10W LED, Crompton Cat Part No. : LBHP-10-CDL or as approved by GE

S&F in replacement decorative wall light fixture made up of poly carbonate suitable for 10 watt LED lamp complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and date of fixing. Make : Havells Cat Part No: LHFOFWE1TZ1W012 or equivalent make in Bajaj, Crompton or as approved by GE

S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer-in-Charge. Note : All LED lights should be marked with GE SGNR and date of fixing. Make : Havells Cat Part No. : LUMILINEPLUSBS10WLED865SPCSS, Bajaj Cat Part No. : BCLSB 10 WH, Crompton Cat Part No. LDL-10-CDL or as approved by GE.

S & F stepped type electric fan regulator flush type for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge

S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in existing PVC conduict 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer-in-Charge. Note : PVC cable and PVC conduit shall be ISI marked

S & F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer-in-Charge.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer-in-Charge.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Sheet metal enclouser for double door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 12 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A, Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs MCCB TP&N 100 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kgs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion complete all as specified and directed by Engineer-in-Charge. ---------------------------------------------------------------------------------------------- Note : A sum of Rs. 55,315.50 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 29 & 30(R) (Schedule of Credit) of Tender document

M/S BUDHRAM BISHNOI

KHANNA CONSTRUCTIONS