Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC | L1 | Accepted-AOC NEGOTIATED WITH L1 | |
| 2 | L2₹15.3 L+₹86,163 (5.99%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹15.4 L+₹96,700 (6.72%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹17.7 L+₹3.3 L (22.9%)Rejected-Finance DIC 138 INDUSTRIAL AREA BADDI DISTT SOLAN H P 173205 | BADDI | SOLAN | HIMACHAL PRADESH | 173205 | L4 | Rejected-Finance L4 |
Tender Value
₹17.0 L
EMD Value
₹33,053
Closing Date
17 Jan 2022, 10:00 amClosed
Superintending Engineer
PLANNING CIRCLE (CIVIL) HPSEBL MANDI
sUPPLY INSTALLATION TESTING AND COMMISSIONING OF FIRE PROTECTION SYSTEM FOR ELCTRICAL STYSTEM COMPLEX MATTANSIDH, HAMIRPUR HP
2021_HPSEB_53916_2
HPSEBL/SEPCM/ESC(MATTANSIDH) /2021-22-1
Open Tender
Electrical Works
Item Rate
90 days
MATTANSIDH HAMIRPUR
AS PER TENDER DOCUMENT
3 documents required · 3 mandatory
₹590
₹33,053
1 Feb 2022
11 Dec 2021
17 Jan 2022
11 Dec 2021
17 Jan 2022
11 Dec 2021
Amount
Supplying,testing, installtion of Air vessel confirming to standards made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required .Make JINDAL HISSAR, TATA.
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile Reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.Make MINIMAX, CEASEFIRE, NEWAGE.
Supplying and fixing single headed Gunmetal internal hydrant valve with instantaneous Gunmetal/Stainless Steelcoupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required: Make MINIMAX, CEASEFIRE, SAFEX.
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required. Make MINIMAX, CEASEFRE, SAFEX.
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required.Make MINIMAX, CEASEFIRE, SAFEX.
Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30"x24"x10") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words" Hose Cabinet" on the Box complete as requried.Make MINIMAX, CEASEFIRE,SAFEX.
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required. Make MINIMAX, CEASEFRE, SAFEX.
2 way 100mmdia M.S. pipe
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required hydraulically test to 20 K./sqcm. Make MINIMAX, CEASEFRE, SAFEX.
80 mm Dia
100 mm Dia
150 mm Dia
Providing and fixing Cast Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect.Make ZOLOTO,KARTAR, SANT.
80 mm dia
100 mm Dia
150 mm Dia
Supply, Installing, testing and commissioning of pressure switch in M.S. pipe line including connection etc. as requried. Make. H GURU , FIEBIG.
SITC Flow switch for Main, Jockey, and staind by Diesel pumps including necessary wiring up to control panel and Ball valve. complete in all respect.Make INDFOSS, DANFOSS.
supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requried.
Supplying, installation, testing and commissioning of 2280LPM at 56m head Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads .(Make KIRLOSKAR, CROMPTION, MATTHER & PLATT or approved by EIC )
Supplying, installation, testing and commissioning of electric driven ressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325 .(Make: KIRLOSKAR, CROMPTION, MATTHER & PLATT or approved by EIC )
Providing & fixing of IS marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. Make:Newage/Minimax/Vijay/Ceasefire
Providing & fixing of IS marked (IS:15683) portable fire extinguisher,WCo2 Capacity 9 Litre type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. Make:Newage/Minimax/Vijay/Ceasefire
25Kg. trolley mounted ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 16018. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases. Make:Newage/Minimax/Vijay/Ceasefire
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size. Make: Havells/Anchor
Armoured cable 16 sq. mm ( 3.5 core) from Fire Fighting panel to Jockey pump
Armoured cable 50 sq. mm ( 3.5 core) from Fire fighting Panel to Main Fire Pump.
Excavation in foundation , trenches etc.in earth work ,lift upto 1.5 meter stacking excavated soil not more than3 meters clear from the edge of the excavation and then into plinths side of foundations .Consolidating each returning the stacked soil in 15cm layers .when required deposited layer by ramming and watering and thenispesing of all surplus excavated earth as directed with in the lead of (20meter pick and jumper work 50% each )150 mmdia MS Pipe.
Providing Pipe Protection for Underground MS Pipes from corrosion painting pipe with approved primer and covered with anticorresive tape (4mm) of approved make IWL pypkote as per specifications. Compelte at site and as directed by the Engineer-in-charge.
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design with common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Repair of all Holes caused due to installation of MS pipe and PVC conduit as required complete in all respect.
Supplying and fixing of Energy saving display laser type sign board glass type specially designed for classic decore with excellent quality high efficiency anf long life for single/both side display, well ventilated , powder coated having nominal size LED lamp, battery backup 6 hours to be installed on wall/ceiling etc. Make: Agni/Autolite/Prolite
Supplying and fixing Floor plan of each floor duly mounted on a wooden frame with 5mm thick glass.
AVINASH FIRE PROTECTION SYSTEM
TARUN FIRE SYSTEM
NATIONAL ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .