Repair to drains PCC path hard standing fencing security walls parapet walls and allied works at Khreuh and Sher e Shali under GE 861 EWS

Amount

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick below or above ground level.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, pilasters etc. complete all as specified and directed.

Demolition of reinforced cement concrete of any description ( reinforcement cut as required to facilitate demolition ) complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided complete all as specified and directed.

Taking down cement plaster on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.

M&L for squared rubble walling , brought up to courses , well bonded , bedded and solidly hearted , built in CM (1:6) complete all as specified and directed.

Description all as per Srl item No 07 here-in- before but except stones complete all as specified and directed.

M&L for flush pointing to random rubble masonry brought up to courses in CM 1:3 complete all as specified.

M&L for brick work with sub class ‘B’ brick straight or curved on plan exceeding 6m mean radius in CM 1:6 complete all as specified

Description all as per Srl item No 10 here-in- before but but except bricks complete all as specified and directed

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified & directed.

M&L rendering15 mm thick in cement mortar 1:6 finishing on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M & L 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement including forming and filling of joints 12mm wide with bituminous filler all as directed at site.

M&L for Plain cement concrete M-15, 1:2:4 type B-1, (using 20mm graded aggregate) as in grouting of angle posts, pillars ,coping,plinth courses,parapets and raillings etc including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in surface channel and drains complete all as specified and directed.

M&L for pre-cast cement concrete (reinforced ) type B-1, 1:2:4 using 20mm graded aggregates as in manholes cover slab set in cement mortar 1: 4.including necessary form work complete all as specified and directed.

M&L in repairs for precast cement concrete louvers and jallies,40 mm thick ,1:2:4 type B0 using 12.5 mm graded aggregate.(measured solid) including all mouldings and pre-cast pillars of size 125 mm x 125 mm in section in CM 1:4 complete all as specified and directed.

M&L for RCC M-25 design mix as in beams, cantilevers bressumers lintels over 1.5 span beam supported on walls etc complete all as specified and directed.

M&L for RCC M-25 design mix as in slab supported on walls, beams and column in floors ,roof landings, balconies,canopies, deck slabs, culverts supported on walls etc complete all as specified and directed.

Form work to edges of concrete flat, breaks in floors and sides of RCC/PCC beam/band in wall and similar work all exceeding 20 cm wide fair finished surfaces complete all as specified and directed.

Form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (horizontal or sloping) fair finished surfaces complete all as specified and directed.

M & L for MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hoping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

Dismantling structural steel work including doors, gates etc complete.

M&L mild steel angle iron for posts, struts in fencing including cutting tops, to shape as required, drilling holes, notching for wire, including welding etc, conforming to Fe-290 Gde, E-165 all as specified.

S&F framed work such as grills, gratings etc, with ends of bars, shouldered, riveted, framed guard bars, conforming to Fe 290 Gde-E-165 all as specified.

S&F framed work as in doors or gates of angle or other section with gusset plate, rails, braces etc, complete drilling for fixing of steel sheeting or other covering,doors etc. ,hanging, fastering and fixing complete conforming to Fe 290 Gde-E-165 all as specified.

M&L for 25 mm thick 1:2:4, type B-0 (using 12.5 mm graded aggregate) as in flooring complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular), area of each tiles exc 0.11 but n exc 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar 1:6 for laying floor finish complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350mm x250mmx7mm/450mmx350mmx7 mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement plaster in CM 1:4 all as specified.

S&F in repairs for galvanised , 2 strand , steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs, 75 mm spacing and straining and fixing to any type of standard rails and straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire complete all as directed.Note:(Each line of wire to be measured)

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded aggregate ) as in sub base for receiving floor finishes etc. complete all as specified and directed.

M&L for chequerd cement concrete tiles glossy finished 30cm x30cmx25mm thick with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over 15 mm thick screeed bed in CM 1:6 all as specified & directed.

M&L for 100 mm thick PCC (1:2:4) type B2 (using 40 mm graded aggregate ) as in hard standing floor finishes even and smooth using extra cement etc. laid in alternate panels including necessary form work complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

S&F 0.63mm thick galvanized corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

S&F 0.80mm thick plain galvanized mild steel sheeting in ridges, hips valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 275 complete all as specified and directed.

M&L for coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15656 -2006 of 60 mm thick M-35 with grey cement and pigment all as specified and directed.

M&L for sand filling under floors or foundation, and receiving to interlocking tiles,complete.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces as in roof sheets including preparation of surfaces over 10cm width or girth including preparing new zinc (or galvanised) surface to receive painting by coating with mordant solution including washing and cleaning etc complete all as specified.

M&L for preparation of new surfaces of steel over 10cm in width or girth with two coat of synthetic enamel paint over a coat of primer red oxide complete all as specified and directed.

M &L for preparing new plastered surface of walls and applying three coats of white wash on wall complete all as specified and directed.

M &L for preparing new plastered or un plastered surface of walls and applying two coats of cement base paint on walls a coat of chalk primer complete all as specified and directed.

M &L for preparing old plastered or un plastered surface of walls and applying one coat of Cement base paint on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primig paint complete all as specified and directed.

AYOOB CONSTRUCTION COMPANY

M/S LATIF AHMAD BABA CONSTRUCTION

M/S MOHAMMAD SHABAN AND CO

M/S STARE BUILDERS

Javeed And Co

FIRDOUS AHMAD BABA

M/S Haji Mohammad Sultan Sofi