REPAIRS TO JOINERIES IN MD ACCN AT 58 SU AF STATION CHIMNEY HILLS

Amount

Hacking out old broken glass ( any thicknes, size, qualityor description) from wodden/ metal frame including punching or drilling out old glazing pins/spring clips and providing new ones complete..

S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete.

M&L for droppery rod with Aluminium, tubular rail 20mm dia as in curtain rails, with fixing brackets, stops, rollers etc complete . Note brackets will be measured and paid seperately.

M&L for Aluminium anodised bracket powder coated or approved make for fixing droppery rod fixed in repairs

S&F in repairs second class hard wood small fittings such as brackets of any type stops/cleat for door or windows articles n exc 200 cu. Cm each complete.

S&F in repairs MS peg stay 300mm long suitable for steel windows fixed with necessary Nut, bolt and washers fixed complete.

S&F in repairs mild steel handle any type suitable steel windows fixed with necessary nut, bolts and washers fixed complete.

S&F in repairs Butt hinges 100mm size, medium weight, cold rolled mild steel

S&F in repairs,Butt hinges 75mm size, medium weight, cold rolled mild steel

S&F in repairs, aluminium anodized barrel tower bolts 150mm of extruded section complete.

S&F in repairs, aluminium anodized barrel tower bolts 200mm of extruded section complete

S&F in repairs aluminium anodized handles 150mm complete

S&F in repairs 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete..

S&F in repairs floor door stopper of aluminum alloy body 140mm complete.

S&F in repairs GI wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with screws or GI staples complete.

S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete .

S&F in repairs 100mm size brass mortice lock, vertical type, 4 lever incl plates and two keys , incl cutting holes into existing pressed steel/wooden frame etc complete.

S&F in repair 30mm wide continuous (piano) hinges, mild steel bright finish or electro galvanised complete.

S&F in repair cast iron or MS Fanlight pivot with plate size 25mm x65mm and suitable for shutter of 30mm thickness and fixed.complete

S&F in repair brush seal Metal door draft stopper , under door sweep blocker seal strip, aluminum sweeps for home doors rodent proof any colour complete

M & L for taking down wooden shutters of any description exc 1.0 sqm and n exc 2.0 sqm and refixing in the same opening after easing and adjusting and necessary repairs complete.

M & L for taking down wooden shutters of any description exc 1.0 sqm and n exc 2.0 sqm and removing to store complete.

Taking down chowkhats or frames with shutters of size exc. 1.5 Sqm but not exc 4 sqm each and removing to store (without taking off shutters from the frames) complete.

Taking down chowkhats or frames with shutters of size n exc. 1.5 Sqm and removing to store (without taking off shutters from the frames) complete.

S&F 105 x 60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete..

S&F 2nd class hard wood, 35mm thk glazed/ skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/guaze etc edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass/ guaze complete.. Note : glazing/gauzing will be measured seperately.

S&F 35mm thick flush shutters, solid core construction, with block core and plywood face panels, commercial type on both sides, fixed to chowkats complete.

M&L in repairs for 12mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and on other side with white fixed to aluminium/wooden frame work, as in pelmet box including necessary clips, washers, beading etc complete.

M&L in repairs for 18/19mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneerson both faces; fixed with screws to timber frame work including necessary clips, washers, beading /PVC tap etc complete.

M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast backing filling, bed block and like complete..

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete..

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete..

M&L for repairs to existing boarding as in cupboard shelves, pelmet boxes cabinets, drawers and partitions and the like by taking down and refixing/resecuring with screws in the same position including making good the surface complete..

S&F steel window/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay complete with glazing bars, dovetailed or welded incl painting with one shop coat of red oxide primer complete..

S&F steel window/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay complete without glazing bars, dovetailed or welded incl painting with one shop coat of red oxide primer complete.

S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete.

M&L for servicing, easing, adjusting to existing steel windows/ventilators shutters area n exc 1 sqm each incl necessary welding/greasing/oiling etc for smooth functioning and taking down unserviceable box type/projecting hinges and replacing with new hingesof any type complete.

M&L for servicing, easing, adjusting to existing steel shutters of any description area exc 2.0 sqm and n exc 4.0 sqm each incl necessary welding/greasing/oiling etc for smooth functioning complete.

M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete.

M&L preparation of new wood or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete.

S&F aluminium anodized barrel tower bolts 200mm of extruded section complete.

S&F aluminium anodized handles 150mm long complete.

S&F aluminium anodized barrel tower bolts 150mm of extruded section complete.

S&F 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete.

S&F floor door stopper of aluminum alloy body 140mm complete.

S&F in repairs 100mm Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel

S&F GI wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with screws or GI staples complete.

M&L running welding in repairs , thickness of Metal to be welded exc 6mm but n.exc 9mm complete.

KUZHIKKAL ENTERPRISES (BID ID -3060028)

ANAND REFRIGERATION (BID ID -3060219)