REPAIR/ RECANNING OF WOODEN CHAIRS, SOFA SETS AND LOCKER, REPAIR OF WOODEN TABLE, TEAPOY, STEEL TABLE, TABLE OFFICE AND CONNECTED STEEL FURNITURE AT 24ED AF STATION MANAURI

Amount

Table centre (FD- 174, 235 AND 274) Taking out Unserveceable top from table center and Supply & Fixed new top made of pre-laminated particle board one side teak face Exterior grade BWR 18mm thick duly covered with 4mm thick teak wood beading with polishing all around the table top complete all as shown in drg & directed by Engineer-in-Charge.

Taking out Unserveceable leg from table center and S&F new leg made of seasoned Shisham second class wood including rubber shoe at the bottom of leg matching with the existing shape & size complete all as specified & directed by Engineer-in-Charge.

Taking out Unserveceable long rail from table center and S&F new front/ back rail made of seasoned Shisham second class wood matching with existing shape & size complete all as specified & directed by Engineer-in-Charge.

Taking out Unserveceable side rails from table center and S&F new side rails made of seasoned Shisham second class wood matching with the existing shape & size complete as directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to table center including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Teapoy wooden (FD – 232, 278 AND 34) Taking out Unserveceable top from Teapoy wooden and Supply & Fixed new top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge

Taking out Unserveceable leg from Teapoy wooden and S&F new leg made of seasoned Shisham second class wood including rubber shoe with screws at the bottom of leg matching with the existing shape & size, complete all as specified & directed by Engineer-in-Charge.

Taking out Unserveceable front/back rails from Teapoy wooden and S&F new front/back rails made of seasoned Shisham second class wood matching with existing shape & size complete all as specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the Teapoy wooden including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Table peg (FD – 236, 277 AND 25) Taking out Unserveceable top from table peg and Supply & Fixed new top made of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge.

Taking out Unserveceable leg from table peg and S&F new leg made of seasoned Shisham second class wood including rubber shoe at the bottom of legs fixed with steel screws matching with the existing shape & size complete all as specified & directed by Engineer-in-Charge.

Taking out Unserveceable front/ back rails from table peg and Supply & Fixed new front/ back rails made of seasoned Shisham second class wood matching with existing shape & size, complete all as specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the Table Peg including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Table bed side (FD – 276, 248 AND 28) (a) Taking out Unserveceable back plywood from table bed side and Supply & Fixed new back made of 6mm thick commercial plywood Exterior grade BWR (Make as specified in Particular specifications) complete as shown in drgs as specified & directed by Engineer-in-Charge.

Taking out Unserveceable shelve from table bed side and Supply & Fixed new shelve made of 12mm thick pre-laminated particle board one side teak face Exterior grade (Make as specified in Particular specifications) complete as shown in drg as Specified & directed by Engineer-in-Charge.

Taking out Unserveceable side from table bed side and Supply & Fixed new side made of 18mm thick pre-laminated particle board one side teak face Exterior grade (Make as specified in Particular specifications) duly covered with 4mm thick teak wood beading matching with the existing shape & sizes complete as directed by Engineer-in-Charge.

Taking out Unserveceable top/ bottom from table bed side and S&F new top/ bottom made of 18mm thick pre-laminated MDF board exterior grade confirming to grade-1 & type III (PL MDF-13 Designation) as per IS 14587), one side teak face in Baverian beach shade and balancing white lamination on other side (Make as specified in Particular specifications) including 6mm thick first class hard word (MP teak) edging all around the top matching with the existing shape & size, complete as specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing surface to the table bed side including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Table Dressing Gents with Mirror (FD – 379) Taking out Unserveceable drawers from table dressing Gents and S&F new drawers made of 12 mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial Exterior grade BWR (Make as specified in Particular specifications) & front of drawers shall be made of 19mm thick pre-laminated particle board one side teak face Exterior grade BWR (Make as specified in Particular specifications) including knob fixed with screws completed as shown in drg, specified & as directed by Engineer-in-Charge.

Taking out Unserveceable top from table dressing Gents and Supply & Fixed new top made of 18mm thick pre-laminated particle board one side teak face Exterior grade BWR (Make as specified in Particular specifications) duly covered with 4mm thick teak wood beading all around the top completed as shown in drgs Specified & directed by Engineer-in-Charge.

Taking out Unserveceable looking mirror from table dressing Gents and Supply & Fixed new looking mirror of size 5.5mm thick of size 380mm x 760mm make Atul/ Modiguard / Golden fish free from distortion and other defect duly framed with backing ply wood, teak wood beading and vertical support etc complete all as shown in drg specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing surface to the wooden surface of table drssing gents including preparation of wooden surface complete as directed by Engineer-in-Charge.

Table Dressing Ladies with Mirror [FD–251, 378 & 32] Taking out unservreceable / damaged drawer from table dressing ladies and supply & fix new drawer made with 12 mm thick seasoned Shisham wood on three sides except bottom of drawers which shall made with 6mm thick commercial ply wood commercial BWR grade of (Make as specified in Particular specifications) & front of drawers shall be made with 18mm thick pre-laminated particle board one side teak face BWR grade (Make as specified in Particular specifications) including PVC knob completed as shown on drg & as directed by Engineer-in-Charge.

Taking out unserveceable top from table dressing ladies and supply & fix new top of table dressing ladies made with 18mm thick pre-laminated MDF board exterior grade confirming to grade-1 & type III (PL MDF-13 Designation) as per IS 14587), one side teak face in Baverian beach shade and balancing white lamination on other side (Make as specified in Particular specifications) including 6mm thick first class hard word (MP teak) edging all around the top complete as shown in drg & directed by Engineer-in-Charge.

Taking out unserveceable bottom from table dressing ladies and supply & fix new bottom of table dressing ladies made with 18mm thick pre-laminated MDF board exterior grade confirming to grade-1 & type III (PL MDF-13 Designation) as per IS 14587), one side teak face in Baverian beach shade and balancing white lamination on other side (Make as specified in Particular specifications) including 6mm thick first class hard word (MP teak) edging all around the top all around the bottom complete as shown in drg & directed by Engineer-in-Charge.

Supply & fixing in repair or damaged looking mirror in table dressing ladies of size 355x1220 mm of 5.5mm thick well polished of approved make such as Atul or Modiguard/ Goldenfish/Swastik free from distorion of Images fitted with wooden beading all around the miror & on back of mirror 4mm ply complete as shown in drg & directed by Engineer-in-Charge.

Supply & fixing in repair or damaged 4 mm thick plain glass fixed / fitted having in two "U" shaped aluminium channel for sliding suitable to match the existing shape complete as shown in drg & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing surface to the wooden surface of table drssing ladies including preparation of wooden surface complete as directed by Engineer-in-Charge.

Chair Easy without Arms (FD-229) M&L in replacement of Front leg of chair easy with second class hard wood shisam and readjusting as per drg complete as specified and shown in drg as directed by Engineer-in-Charge.

ditto all as per item No 7 above but Rear leg.

ditto all as per item No 7 above but Hand Rest.

ditto all as per item No 7 above but Side rail for Seat/back

ditto all as per item No 7 above but Front / Back rail.

ditto all as per item No 7 above but Bottom Stiffner.

Re-Canning of Chair Easy with 2mm wide half round white plastic cane and border canning with 4mm wide plastic cane complete as per specification including taking out old cane complete as specified and shown on drawing as directed by Engineer–in-Charge.

Polishing with Hi-gloss French polish to match with the existing surface of Chair Easy including preparation of old wooden surface complete as specified & directed by Engineer-in-Charge.

Chair CB with Arms (Drg No 229) M&L for replacement of damaged / broken parts of chair CB Arms with first class teak wood and readjusting as per Drg complete chair as specified and shown on Drg as directed by Engineer-in-Charge for the following :- (i) Front legs

(ii) Rear legs

(iii) Hand Rest

(iv) Front & Back Rails

(v) Bottom Stiffners

Re-Canning of Chair CB with arms canned with 2mm wide half round white plastic cane and border canning with 4mm wide plastic cane complete as per specification including taking out old cane complete as specified and shown on drawing as directed by Engineer–in-Charge.

Polishing with Hi-gloss French polish to match with the existing complete to the Chair CB with arms including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge.

Chair Wooden bottom with out Arms (FD-225 & 285) Taking out Unserveceable ply wood seat from chair wooden bottom with out arms and Supply & Fixed new ply wood seat 6mm thick commercial plywood Exterior grade BWR and including French polishing complete Chair (Make as specified in Particular specifications) complete as shown in drg as specified & directed by Engineer-in-Charge.

Taking out Unserveceable rear legs from Chair wooden bottom without arms and Supply & Fixed new rear leg made of seasoned teak wood matching with the existing shape & size complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable front legs from Chair wooden bottom with out arms and Supply & Fixed new front legs matching with the existing shape & size complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable front/ back/ side rails from Chair wooden bottom without arms and Supply & Fixed new front/ back/ side rails matching with the existing shape & size complete as specified & directed.

Taking out Unserveceable stiffeners from Chair wooden bottom without arms and Supply & Fixed new stiffeners made of seasoned teak wood matching with the existing shape & size complete as specified & directed.

Polishing with Hi-gloss French polish best quality of the Chair wooden bottom without arms including preparation of old wooden surface complete as specified & directed by Engineer-in-Charge.

Chair Dinning with long back (FD-357) Taking out Unserveceable rear leg from chair dinning long back and Supply & Fixed new rear leg made of seasoned Shisham wood matching with existing shape & size complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable front leg from chair dinning long back and Supply & Fixed new front leg made of seasoned Shisham wood matching with existing shape & size complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable rear/ front/ side rail of chair dinning long back and Supply & Fixed new rear/ front/ side rail made of seasoned Shisham wood matching with existing shape & size completed as specified & directed.

Taking out Unserveceable stiffeners from chair dinning long back and Supply & Fixed new stiffeners made of seasoned Shisham wood matching with existing shape & Size complete as specified & directed.

Taking out Unserveceable seat from chair dinning long back and Supply & Fixed new seat from chair dinning made with 6mm thick ply wood with 50 mm thick cushion covered with black regsine matching with existing shape & size complete as specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish best quality of the Chair dining long back including preparation of old wooden surface complete as specified & directed by Engineer-in-Charge.

Chair Dining (FD-279-223) (a) Taking out Unserveceable rear leg from chair dinning Supply & Fixed new rear leg made of seasoned Shisham wood to matching with existing shape & size complete as specified & directed by Engineer-in-Charge.

Taking out Unserveceable front leg from chair dinning Supply & Fixed new front leg made of seasoned Shisham wood to matching with existing shape & size complete as specified & directed by Engineer-in-Charge.

Taking out Unsrveceable front/ back/ side rail of chair dinning and Supply & Fixed new front/ back/ side rail matching with existing shape & size completed as specified & directed by Engineer-in-Charge.

Taking out Unserveceable stiffeners from chair dinning and Supply & Fixed new stiffeners made of seasoned Shisham wood matching with existing shape & Size complete all as specified & directed.

Re-Canning/PVC bottom as per size of bottom of chair dinning with new 2mm wide half round white plastic cane & Border Canning with 4mm wide plastic cane complete as per specification complete as specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish best quality of the Chair dining including preparation of old wooden surface complete as specified & directed by Engineer-in-Charge.

Chair Writing (FD-280) M&L for replacement of Front legs of chair CBW Arms with first class Shesham wood and fitted or readjusting as per Drg complete chair as specified & shown on Drg as directed by Engineer-in-Charge.

ditto all as per item No 12 above but Rear legs

ditto all as per item No 12 above but Front/back rails for seats

ditto all as per item No 12 above but Bottom stiffeners

ditto all as per item No 12 above but Hand rests

Re-Canning of chair writing with new PVC plastic 2 mm thick half round white plastic cane and Border canning with 4mm wide Plastic cane complete including taking out old damaged cane carefully as specified & shown on drg as directed.

Polishing with Hi-gloss French polish best quality of the Chair CB with arms including preparation of old wooden surface complete as specified & directed by Engineer-in-Charge.

Table Dinning 6/8 person(FD-273 &269) Taking out unserveceable table top from table dinning 6/8 person and supply & fix new table top made with 18mm thick pre-laminated MDF board exterior grade confirming to grade-1 & type III (PL MDF-13 Designation) as per IS 14587), one side teak face in Baverian beach shade and balancing white lamination on other side (Make as specified in Particular specifications) including 6mm thick first class hard word (MP teak) edging all around the top complete as shown in drg & directed by Engineer-in-Charge.

Taking out unserveceable/ damaged legs from table dinning and supply & fix new legs of table dinning made of seasoned Shisham wood matching with the existing shape & sizes including PVC or rubber shoe at the bottom of leg to match the existing complete as specified & directed by Engineer-in-Charge.

Taking out unserveceable/ damaged front / back rails from table dinning 6/8 person and supply & fix new rails of table dinning 6/8 person made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Taking out unserveceable/ damaged side rails from table dinning 6/8 person and supply & fix new side rails of table dinning made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish to match with the existing surface to the table dinning 6/8 person including preparation of old or new wooden surface complete as directed by Engineer-in-Charge.

Locker Bed Side Wooden (FD 54(M), 222) Taking out unserviceable back ply wood from locker bed side wooden and Supply & Fix new back made of 6mm thick ply wood commercial BWR grade (Make as specified in Particular specifications) complete as shown on drawing & as directed by Engineer-in-Charge.

Taking out unserviceable Shelves from locker bed side wooden and S&F new Shelves made of 18 mm thick prelaminated particle board commercial Exterior grade BWR (Make as specified in Particular specifications) complete as shown on drawing & as directed by Engineer-in-Charge.

S&F Chromium plated piano hinge 19mm flap width and 780 mm long for door of locker bed side with mild steel screw of appropriate shape and size complete as shown on drawing & as directed by Engineer-in-Charge.

Taking out Unserveceable top/ bottom from locker bed side wooden and S&F new top/ bottom made of 18mm thick prelaminated particle board one side teak face Exterior grade, (Make as specified in Particular specifications) complete as shown on drawing & as directed by Engineer-in-Charge.

Taking out Unserveceable door Shutter from locker bed side wooden and S&F new Shutter made of 18mm thick prelaminated particle board exterior grade BWR one side teak face & other white including 100 mm hasp & staple one number 100 mm aluminium handle complete as shown on drawing & as directed by Engineer-in-Charge.

Polishing with Hi-gloss French polish best quality of the locker bed side wooden including preparation of old wooden surface complete as specified & directed by Engineer-in-Charge.

SOFA SET FIVE SEATER (SINGLE SEATER ) FD-234 sheet 1/1 dated 21.7.81 (a) Taking out of defective components from single seater sofa set such as sofa spring, cushion/coir, cotton layer, hession cloth, tapestry cloth, nails, cane stick for fixing the spring etc. and Supply and fixing in replacement of new defective spring, coir of approved quality in seat and back, nails, cane stick for fixing the spring and other necessary componets which are involve for complete repair of sofa and including alround covered with approved standard tapestry cloth rate not less than Rs. 550/- to 650/- per running metre, cotton layer, tapestry cloth as approved by Engineer-in-Charge and as specified in Drg FD-234. Note:-(i) Tapestry cloth, hession cloth, tapestry cloth & cushion shall be replaced in all single seater sofa and cost of these shall be deem to be inculde in quoted rates. (ii) Rates of replacement of defective ply, stiffeners, Planks, rails shall be deem to be inclusive in quoted rates. (iii) All wood work and teak veneered surfaces shall be Hi gloss french polished and rates for above shall be deem to be inclusive in quoted rates. .

(b) Supply only 65 mm thick 32 density Cushion with tapestry cloth detachable type using one side suitable zip as approved covered all around with white marking cloth (costing not less than Rs 100 per running metre as approved by AGE(I) duly stitched in each cushion. Cushion shall be covered with approved standard tapestry cloth rate not less than Rs. 550/- to 650/- per running metre and zip of suitable length on any one side of standard quality to facilate change of cover and as approved by Engineer-in-Charge. (Make : Cushions- Sleepwell or Kurlon.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.

M/s M A Traders

swastik builders