Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹18.8 L
Closing Date
17 Feb 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Bruhat Bengaluru Mahanagara Palike
SAVITA PADAMATI
Improvements to Roads, Drains & Footpath and Asphalting including Milling surface of Selected Arterial, Sub-Arterial and other important roads in Sarvagnanagara Assembly Constituency (Package No.E-2) of RI-East Division
BBMP/2024-25/RD/WORK_INDENT6420
BBMP/2024-25/RD/WORK_INDENT6420
Open
Roads
Two Tender Document System(Two Cover)
BBMP East Major Roads
7 documents required · 7 mandatory
To qualify for Award of this Contract, each Tenderer in its name should have in the last five years i.e. 2019 -20 to 2023-24 satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work value not less than Rs. 9.42 Cr (usually not less than 50% estimated value of contract
To qualify for Award of this Contract, each Tenderer in its name should have in the last five years Executed in any one Financial Year, the following minimum quantities of Work CLAUSE 3.2 D table of rfp document
Availability by owning at least 50% of the following Key and Critical Equipment for this Work and the remaining 50% can be deployed on Lease / Hire Basis for all Works provided the Relevant Documents (Purchase Invoice in case of owning, Commitment Agreement in case of Lease / Hire Basis) for Availability for this Work are furnished. Further, Tenderer applying for more than one Package shall demonstrate the resource separately for each package. 3.3 A table of rfp document
Liquid Assets and / or availability of Credit Facilities of no less than Rs.5.65Cr (Credit Lines / Letter of Credit / Certificates from Banks for meeting the Fund Requirement, etc.)
To qualify for Award of this Contract, each Tenderer in its name should have in the last five years i.e. 2019 -20 to 2023-24. Achieved in at least two Financial Years a minimum Financial Turnover (in all classes of Civil Engineering Construction Works only) of Rs. 37.66 Cr Further, the Financial Turnover of the Previous Years shall be given a Weightage of 10% per year to bring them to the Price Level of 2023-24
₹7,500
₹18.8 L
2 Feb 2025
2 Feb 2025
18 Feb 2025
11 Feb 2025
11 Feb 2025
Improvements to Roads, Drains & Footpath and Asphalting including Milling surface of Selected Arterial, Sub-Arterial and other important roads in Sarvagnanagara Assembly Constituency (Package No.E-2) of RI-East Division
Removing and Refixing of Drain slabs(BS Slab and RCC Slab) and pointing in CM 1:3 as directed by the Engineer-in-charge of the work Complete Specification As per the Direction Engineer in Charge.
Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and lead . Complete Specification As per the Direction Engineer in Charge.
Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to ...
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation.The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite / trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Cod...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Providing and laying 60mm thick factory made precast M 30grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid i...
Ruled / Flush pointing on Sand stone masonry surface with lime,surkhi and marble dust mortar in the ratio of 1:1.5:1/2 One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) 1/2 marble dust (The...
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...
Providing and fixing precast reinforced cement concrete covering slabs of 23cm thick made out of M25 with OPC cement 340kgs/Cum, with 20mm down size graded metal coarse aggregates @ 0.70cum and fine a...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge.(The cost of P...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Complete Specification As per the Direction Engineer in Charge.
Supplying and installation of COMPOSITE FIBER REINFORCED POLYMER Water Gully Grating with bottom chamber of appropriate size of 450 x 450 mm and a load bearing capacity of 40MT (D400 Load capacity) of...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Complete Specification ...
Milling of existing Bituminous surface to a specified depth up to 40mm using Milling machine including disposal of removed material. Complete Specification As per the Direction Engineer in Charge.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...
Providing and laying Dense Graded Bituminous Macadam with 100 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2on the prepared bituminous surface cleaned with mechanical broo.Tack coat on ...
Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, 5.4 per cent of mix and filler, tra...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...
Microsurfacing Type-II: Providing and laying 4 to 6 mm thick microsurfacing layer as Levelling course in single layer using crushed aggregates @ 9.0 Kg/Sqm manufactured Sand (Crushed stone dust with ...
Microsurfacing Type-III: OL-3 5.35 Microsurfacing as per iRC SP 81:2008 IRC 81: 2008 Providing and laying Micro Surfacing Course Type II for traffic 1500CVPD with 6mm thickness as per IRC SP 81:200...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
East Pkg-05 Tender documnet kw4.pdf
Tender Document • 2.08 MB
Tender Notification E2 and E5.pdf
Others - TENDER NOTIFICATION • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .