Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹12.2 Laccepted-aoc | ₹12.2 L | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹31,500
Closing Date
22 May 2026, 11:00 pmClosed
Directorate of Municipal Administration
Narase gowda H
Detailed Estimate for the work annual maintaince for repairs & replacement of parts of submersible pump set, motor cable, control panels, internal & external wiring, water supply mechinaries in SWM Site, H N Park, Eco Prak koral kute kere, reddy kere,Gdidam kere,WTP & chiravathi dam in the limits of TMC Bagepalli
DMA/2026-27/WS/WORK_INDENT57119
DMA/2026-27/WS/WORK_INDENT57119
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
DMA Town Municipal Council Bagepalli
₹500
₹31,500
22 May 2026
7 May 2026
25 May 2026
14 May 2026
Detailed Estimate for the work annual maintaince for repairs & replacement of parts of submersible pump set, motor cable, control panels, internal & external wiring, water supply mechinaries in SWM Site, H N Park, Eco Prak koral kute kere, reddy kere,Gdidam kere,WTP & chiravathi dam in the limits of TMC Bagepalli
Repairs to Motor Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labo...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...
ALL TYPES OF JACK WELL V-T PUMP DETAILS as per ISI specifiction with guarantee period of not less than 12 months -For Pump dismentaling and refitting after attending repairs.
Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...
The Intermediate piece (IP) with IP leaded bronze brush.
The Oil Seal.and steel bush
The Impeller (Shell moulded with aluminium and bronze.)
The discharge outlet (DO) bearing DO steel brush DO bearing.
The steel bearing bush (DO steel bush)
he pump shaft made out of stainless steel counterless ground with key way (upto 8 stages). Extra for Each stage @ Rs.40
The pump key (stainless steel)
The pump coupling (stainless steel)
The Allen screw
The Non Return Valve (NRV) assembly complete with rubber 'O' ring.
The cable guard
The brass filter
Replacement of Motars parts The upper flange
The lower flange
The Upper /lower flange
The carbon Housing
The carbon Housing The Carbon Housing (Thrust bearing block assembly complete with segment bearing pad
The stud and Nuts
The Gun Metal bearing, centrifugally cast Aluminium Bronze bearing bush
The Motor base with pin
Labour cjharges The Transportation of pumping machineries
The Re-errection charges of pumping machineries including overhauling and painting
The lifting of submersible pumpset from well.
The Labour Charges for overhauling of the pump set.
Control Panels Ammeter
Singale phase preventer
3Way and 5 Way Connector
Over load relay
160 Amps contractor kit
Phase indicator
Providing wrought mild steel (galvanized) GI collar confirming to IS
1239-II, 1991 with latest amendments if any. For 50 mm dia GI collar:
Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for:For 50 mm dia GI elbow
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments 1x3x6 m2
Supplying and fixing HRC fuse link on existing switch fuse base with
W loss as per IS-13703. Above 63 A to 200 A
Borewell cap & clamp set
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-1 -57119.docx
Tender Document • 1.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .