SPL REPAIR TO BLDG NO P12 TO P15 COOK HOUSE P12 12 QUARTERS and P18 OR MD ACCN AT PALERAM ENCLAVE AT NAMS UNDER GE NAMS

Amount

Taking down cement plaster from wall's/ceiling including raking out joints hacking for key scrubbing down with water complete all as specified.

Material and labour for 15mm thick cement plaster in CM (1:6) on other than fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement)complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick work and finishing the surface even and smooth (without using extra cement) incl WPC @ 3% by weight of cement etc complete all as specified.

Material and labour for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and fair (without using extra cement) etc Complete all as specified.

Supply only water proofing compound complete all as specified and as directed.

M&L for two coats of Oil Bound Distemper including preparation as new surfaces on chalk whiting on walls complete all as spcified.

Material and Labour for preparation of new plastered surfaces and applying two coats of cement base paint on wall over a coat of primer complete all as specified.

Material and Labour for preparation of old decorated surfaces and applying one coats of cement base paint on walls including complete removal of existing treatment complete all as specified.

Material and Labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified.

Material and Labour for preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified.

Material and labour for preparation of old decorated surfaces and applying one coats of oil bound distemper on walls complete all as specified.

Material and Labour for preparation of old plastered surfaces and applying one coat of white wash on ceiling complete all as specified.

M&L for two coat of weather proof exterior emulsion paint over one coat of alkali resistance primer incl preparation of new plasterd surface complete all as specified and directed. Note : Colour and make as approved by Engr-in-Charge

Material and Labour for reparing of RCC projection, chajja, roof facia, celling by scrapping, cutting, derusting and cleaning exposed reinforcement surfaces of damaged loose RCC surface and applying neat cement slurry @ 3 kg/Square Meter and filling the surface with cement plaster 1:3 one or two layer as reqd or PCC 1:2:4 as directed by Engr-in-Charge with or without facia and smooth finished and smotth edges in any height and any situation including necessary form work and demolition of old RCC projection complete all as specified and directed.

Material and labour PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in hold fast block, coping, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified.

Taking down chowkhats or frame exc 1.5 Square Meter but n.exc 4 Square Meter each with shutters (without taking off shutters from frame) each complete all as specified and directed.

Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 10 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) Two coat of red oxide primer to MS window and guard bar. Note : Including taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or frames with shutter (without taking off shutters from chowkats / frame) not exc 1.50 Square Meter each including cutting of holes for hold fast complete all as specified.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD-06/07 dt 07.06.07 incuding cutting holes and taking down old steel ventilator complete all as specified. Note: Sheet glass and painting shall be measured and paid Separately.

Taking down and refixing in same opening after making necessary cutting shutter of any description size but exc 1 Square Meter and n.exc 2 Square Meter complete all as specified and directed.

Supply and fixing 35mm thick flush shutter, soild core construction with plywood face panels, commercial type on both sides complete all as specified.

Supply and fixing plain, framed, panelled shutters 35mm thick (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commerical face veneers complete all as specified

Taking down shutter of any description size exc 1 Square Meter and n.exc 2 Square Meter complete all as specified and directed.

Supply and fixing 35mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges for receiving glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

Material and labour MS framed works as in door frame, gates of angle or other section with gusset plates, rails, braces etc , drilled for fixing of steel sheeting including drilling or fixing welding be prepared for hanging or sliding with and either hooks and hinges fixing, framed work as in grill, guard bars etc withends of bars riveted or forged into spikes, framed guard bars and similar work conforming to Fe 290 Gde E-165, complete all as specified.

S & F in repair 18/19 mm prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & othe side balancing white lamination, fixed with 50mm screws/welding the any type of frame work incl 100mm long handle each panel and 75mm long aluminium hasp & staple complete all as specified and directed.

Supplying & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing given in Section 8 of SSR Part –II 2010.

Supplying and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Square Meter in each panes including hacking out old broken glass from metal/wooden frame complete all as specified.

S & F 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 Square Meter in each pane complete all as specified and directed.

Supplying and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples or wooden beads complete all as specified.

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 300mm size, Aluminium sliding door bolt, stove enamelled black, with sliding bolt not less than 12mm dia including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame complete all as specified and directed

S&F 150 mm size aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller plate including fixing with nailsd/ bolts or welded compete all as specified.

S&F 150mm size extruded aluminium anodized handle cast type complete all as specified.

S&F floor door stopper, 140 mm size, aluminium alloy body and tongue, anodised, with hard drawn steel spring compete all as specified.

M&L preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetics enameled paint complete all as specified and directed.

Material and labour for preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces exceeding 10 cm width or girth including preparation of new surfaces complete all as specified.

M&L preparation of old steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fixing, in replacement,18/20mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS finials complete all as specified .

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and directed.

Supply and fixing galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed to walls, ceiling or laid in floor complete and make good in CM 1:3 all as specified and directed.

Supply and fixing galvanized iron steel tubing medium grade 20mm bore with all fittings and fixed to walls, ceiling or laid in floor complete and make good in CM 1:3 all as specified and directed.

Supplying and fixing, in repair, PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity (white) with inlet ball valve, float valve, push button type including pipe 32mm dia of PVC (heavy duty) flush pipe, brackets etc complete all as specified.

S&F in repair PVC connection 15mm bore and 450mm long incl taking down of old complete all as specified.

Supplying and fixing in repairs CP grating 125 dia with or without hole fixing with cement mortar 1:3 complete all as specified.

S&F, PVC shelf 12cm wide and approx 42 cm long fixed with screws complete all as specified and directed by Engr-in-Charge.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges.

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as spd(minium weight of 300gms)

S&F of 20mm Ball valve high presure of standard of PTMT any coloured with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as spd

Supply and fixing in replacement bib tap, 15mm bore, chromium plated,long body type, screwed down, screwed to iron pipe or union complete all as specified.

S&F in replacement 15 mm bore stop valves, fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed.

Supply and fixing in replacement, stop cock, concealed, 15mm bore, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified.

S&F in repair brass chromium plated pressure adjustable shower rose 125mm size fancy type with revolving joints incl shower arm 190mm and fixing to steel pipe or union complete all as specified.

S & F in repair vitreous china ware over counter ovel wash hand basin, any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling all as specified and approved by Enger-in-Charge.

Supplying and fixing, in repairs, vitreous china ware squatting pan ‘Orissa’ pattern size 580x440mm white with integral foot rest complete all as specified.

S&F 32 mm bore dia PVC waste pipe (corrugated) for wash hand basin/ SINK and fixed complete all as specified and directed.

S & F 32 mm dia waste fittings, brass chromium plated for glazed ware sinks, wash basins, urinal etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixedcomplete all as specified and directed.

Supplying and fixing, stainless steel plate rack 1mm thick, 750mm x 750mm x 250mm, with folded edge gloss finish complete all as specified and directed.

Supply and fixing sink with drainage board made of stainless steel 1mm thick with plugs, washers and waste pipe complete including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all minimum size 915mm x460mm, bowel size 410mm x 330mm x160mm complete all as specified.

Supplying and fixing new rotational moulded polyethylene water storage tank of triple layered(Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position, capacity 500 litres including 20mm bore ball PTMT valve high pressure with polythene float and fly nut, screwed including dismantling of old unservicable water tank complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyetheylene water storage tanks of tripple layered(cylingrical verticlal with closed top) hoisted and fixed in position all as per SSR part-I incl 20mm bore ball valve PVC high pressure with palythene float and flynut incl taking down/dismantling of old pvc tank complete all as specified and directed.

Dismantling to water tanks of capacity exc 500 ltrs and not exc 1000 ltr complete,and refixing it at same places all as specified and complete

Material and labour for pre-polished granite slab (colour as approved) 20mm thick, machine cut, laid, jointed and pointed with grey cement slurry mixed with pigment to match the shade of slab including rounding of edges, over and including 15mm thick screed bed in cement mortar 1:6 as in vertical/horizontal surfaces complete including dismantling of old tiles all as specified and directed.

Material and labour for 18 to 20 mm thick kota stone slab flooring (Machine cut) of size 550x550mm laid over and including 20mm thick bedding layer in cement mortar 1:6, jointed and pointed in grey cement mixed with pigment to match the shade of slab with rubbing and polishing including demolition of old tiles complete all as specified.

Supply and fixing coloured non skid jointless ceramic tiles 7 to 8mm thick ( square/ rectangular ), area of each tile exceeding 0.06 Square Meter but not exceeding 0.11 Square Meter, as in floor, set and jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including 15mm thick bedding layer in cement mortar 1:6 with dismantling of old tiles complete all as specified.

Supply and fixing coloured glazed jointless ceramic tiles 7 to 8mm thick ( square/ rectangular ), area of each tile exceeding e 0.11 Square Meter,but not exceeding 0.18 as in vertical surfaces, such as skirting dados and risers set and jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including 10mm thick backing layer in cement mortar 1:4 including dismantling of old tiles of any discription or thickness with backing coat as in wall as complete all as specified.

Supply and fixing coloured glazed Jointless ceramic tiles in vertical surfaces 300x200x7 mm 7 to 8mm thick as in vertical surfaces, such as skirting dados and risers set and jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including 10mm thick backing layer in cement mortar 1:4 including dismantling of old tiles of any discription or thickness with backing coat as in wall as complete all as specified.

Material and labour for green marble 18-20mm thick, any type, table rubbed and polished, in cooking plateform and like, set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble over and including 15mm thick cement screed bed in CM (1:4), including dismantling of old existing stone slab, tiles etc complete all as specified

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry including dismantling of old tiles complete all as specified and directed.

Dismantling cast iron/ PVC/SGSW pipe any dia fixed to wall with any type of joints

M&L Plain cement Concrete 1:3:6, TypeC2, bed to drain pipes of size150mm including packing under, and haunching against the sides of pipes after they are laid and tested including demolition of concrete in any position and thickness complete all as specified and directed.

M&L for 150 mm bore dia RCC Class NP 3 pipes laid and jointed with collar including demolition of concrete in any position and thickness complete all as specified and directed.

Cutting chases, pinning in. making good to facing of brick or block masonary wall where required and pointing in cement mortar 1:3 to ends or edges of cills, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as spd

Material and labour for RCC 1:2:4 type B-1(using 20 mm graded stone aggregates),as in slabs, beams,shelves, chajjas, landing etc complete all as specified

Material & labour for mild steel reinforcement TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Material & labour for rounding to edges of stone slabs one edge, such as in , cooking platform s complete all as spd

Material & labour for formwork to sides and soffits of slab or roof beams, beam haunching etc for rough finished surface of concrete complete all as specified and directed.

Material & labour for cutting grooves in brick,PCC/RCC wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as spd and as directed.

S&F 100mm cast iron soil, sand cast pipes, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors .

S&F in repair 100mm cast iron bends diminishing pieces or tapers in repairs.

S&F in repair 75mm cast iron soil, sand cast pipes, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with clamps

S&F in replacement 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repair 75mm cast iron bends diminishing pieces or tapers with oval access in repair all as specified and directed

S&F in replacement of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in replacement 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed by Engineer-in-Charge.

S&F in replacement 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed by Engineer-in-Charge.

S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed

S&F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed

S&F PVC (SWR) 75 mm dia junction single,(Single T) equal or unequal with access door complete all as spc

S&F PVC (SWR) 110 mm dia junction single,(Single T) equal or unequal with access door complete all as spc

M&L 75 mm thick cement concrete for plinth protection, type C-2 ,1:3:6 (using 40 mm graded crushed stone aggregate), without using extra cement Contraction (Dummy) joints 25 mm deep x 10mm wide at every 3 mtrs , filled with sealing compound Grade 'B' complete all as specified as directed.

Dismantling brick tiles single layer as in roofing,all as specified and directed.

M&L 50 mm thick cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof padding finishes even and smooth without using extra cement complete all as specified.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specifed and directed and dispose off from site

Material and labour for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non-wove fabric (weight not less than 150 gm/sqm), laid on primed surface by forced application laid after preparation of surfaces by cleaning thoroughly to achieve a smooth surface, application of a coat of bitumen primer @ 0.30 ltr per Sqm over a coat of hot blown bitumen of grade 85/25 @ 1.2 Kg per Sqm, overlaps of polymer shall be minimum 10 cm width/length wise complete all as specified and directed.

Material and labour for 40mm thick brick tiles, laid on and including 15 mm thick cement plaster in cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement, complete all as specified and directed.

Description as per item no 101 above but except brick tiles

M&L, Rendering 10mm thick in CM 1:3 with WPC in sunken slab cleaning of surfaces incl WPC @ 3%Weight of cement etc complete all as specified and directed. Note:- Cost of WPC shall be inclusive in unit rate quoted by the tenderer.

Material and labour for cement concrete 1:5:10, type E-2, using 40mm graded stone aggregate, as in mass filling in sunken floor complete all as speciified.

S&F in repair 40mm dia GI for Spout pipe incl necessary cutting of existing beam/slab complete all as specified

M &L providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in surface of channel,drain,benching and PCC bend for top of manhole brick work etc with slightly chamfered or rounded angles including necessary form works , if any and finishing exposed suface even and smooth without using extra cement etc complete all as specified and as directed.

Supplying and fixing PVC (SWR) pipes double socketed, dia of pipe 110mm, in any length with rubber ring joints, fixed to wall with necessary MS stack clamps or laid in trenches, under floor complete all as specified.

S&F 110 mm bore PVC (SWR) bends any radius with access door all as specified & directed

Demolition of cement concrete in ground floor and paving etc, not exc 15 cm thick (below or above ground level) and disposal of unserviceable materials, debris and rubish to a distance not exc 100m complete all as specified.

Dismantling of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debris,rubbish to a distance exc 400 m but not exc 500m complete all as specified.

M&L for brick work with sub class 'B', old size bricks, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6 complete all as specified.

Description as per item no 111 above but except bricks

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan to any radius, in half brick thick wall, built in cement mortar 1:4 complete all as specified.

E/M ITEMS Taking down aluminium point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for point wiring with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FR unsheathed and multi stranded copper conductor cable in existing PVC Concealed conduit not less than 20mm dia 1.5mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick heylam sheet top cover, sheet screws and 1.6mm thick GI sunken boxes after removing old unserviceable plastic laminated sheeet and sunken boxes included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc . complete all as specified and directed for the following :- Note : The cost of sunken boxes and bakellite sheet is included in the quoted rate)

Description as per item No 115 above but for one three pin socket outlet 5 Amps independent board complete

Description as per item No 115 above but for one three pin 5 Amps socket outlet on the same board with other switches

All a per item No 115 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing in replacement of switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement of socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement of switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement of socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and fixing in replacement of ceiling rose 65X50 mm two to three terminals complete all as specified.

S&F in replacement of fan regulator, electronic step type heavy duty 230 volts complete all as specified and as directed.

S&F in replacement of lamp holder insulated body with back plate angle type for batten fitting fixed on bakelite sheet 100mmx100mm with 10 Watt LED Bulb 230V AC cool day light 6500K having maximum height 1020mm heavy duty complete all as specified.

M&L in replacement for two single core sub main wiring 6 Sqmm multi-strand PVC insulated FR copper conductor cable including PVC insulated copper conductor cable of size 2.5 Sqmm as cotinuous earth wire connecting to common earth including PVC Conduit of reqd size connections of cable with MCBs or bus bars complete all as specified and directed

M&L in replacement for two single core sub main wiring 4 Sqmm multi-strand PVC insulated FR copper conductor cable including PVC insulated copper conductor cable of size 2.5 Sqmm as cotinuous earth wire connecting to common earth including PVC Conduit of reqd size connections of cable with MCBs or bus bars complete all as specified and directed

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

S& F in replacement of MCB single pole 6 to 32 Amps all as specified and directed

S&F in replacement of MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed

Supply and fixing in replacement of LED T-8 tube light fitting with single side connection LED tube rod 18/20W 4 feet 1 x 18/20 watt MS CRCA box type including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.

M & L for sheet steel enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :-( For out going MCB measured and paid for separately) (a)MCCB 100 amps, 16 KA, TP, 415 volts, 50 Hz = 01 No.

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size50 mm outer dia and 38 mm inner dia of Make;-Telerex/Tirupati or E-in-C approved Make

Supply & fix in replacement of LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens.

Supply and fixing in replacement of bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts etc for street light all as specified and direceted.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Supply & laying in replacement of XLPE insulated armoured heavy duty electric cable with aluninium conductor 1100 volt grade cross section area 4 core 25 Sqmm .

Excavation trenches not exceeding 1.5m wide & not exceeding 1.5m in depth for and getting out in any of soil.

Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified and directed.

Removal of surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified

Supply & fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed.

Supply and fixing in replacement of bell Ding Dong AC 230 volts complete all as specified and as directed

Supplying and fixing in replacement LED bulk head light fittings 10watt white including LED lamp as per IP65 in enginnering plastic housing withclear prismatic diffuser and making necessary connections complete all as specified and as directed by Engr-in-Charge.

Taking down the ceiling fan/Exhaust fan /Geyser in situ and refixing after servicing, repairing and painting to ceiling fan/Exhaust fan /Geysers including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint all as specified and directed.

tarlok singh contractor

Chander Mohan Arora Contractor

ESS KAY BUILDER

AS CONSTRUCTION