SPECIAL REPAIR TO BLDG NO TO 227 P 83 T 827A TOTAL 10 X TOILET BLOCKS UNDER AGE BR I OF GE 865 EWS

Amount

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

M & L for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate complete all as specified and as directed by the Engineer-in-Charge

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match OVER 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge

M&L for glazed ceramic coloured tiles in vertical surfaces such as skirting,dados and riser to steps etc size 350x250mmx7mm/450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over including 10mm thick plaster CM (1:3) complete all as specified.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair without fair extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L applying 02 coats of distemper oil emulsion paint preparation of newly plaster surfaces (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to new surfaces , over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

M&L applying 02 coats of exterior emulsion paint preparation of newely plaster surfaces (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to new surface of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over a coat of wall putty thickness vary from 1 to 1.5 over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)

M&L applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to old wall surfaces , over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer Complete removal of existing treatment complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

M & L for preparing existing treated surfaces on ceiling including cornices and applying two coat of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to old external wall surfaces walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over a coat of wall putty thickness vary from 1 to 1.5 over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer, including complete removal of existing treatment complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)

Dismantling of Wall/floor and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Dismantling framed wooden fillets, rails posts, rafters, grids for ceilings & wall panelling etc under 40 Sq.cm in section

M&L 2nd class soft wood clean swan as in battens for grids of ceiling and lining fixed with nails exc 13 Sq cm and n exc 25 Sq cm in section. Complete all as specified and as directed

M&L Covered fillets of standard hard board, not less than 6mm thick and up to 40mm wide, and fixing with screws complete all as specified and as directed

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails or screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails or screws to timber frame work as in ceiling complete all as specified and as directed.

M&L Prelaminated particle board,18/19 mm thcik both side interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .

M&L for wooden floor tiles of teak wood laminated finish 10 mm thick with dove tailed joints over 150 micron polythene film and 3mm thick foam as per manufacturer's instructions and fixed with decorative wooden beadings as per site requirement complete all as specified and directed.

S&F Piano/continuous hinge of size 40 mm (when open) stainless steel complete all as specified.

S&F 125mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed.

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

M&L for 15mm thick cement plastering on roof of brick or concrete surfaces in CM 1:4 finished even and fair mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

M&L priming surfaces and applying normal treatment (for moderate condition) for APP based polymeric minimum weighing 3 kg/Sqm and minimum 3 mm thk reinforced with polyester non woven fabric (wt not less than 150 gm/sqm laid in primed surfaced application including preparation of new surface of membrane and applying two coats of Aluminium paint complete all as specified and directed by Engr-in-Charge.

Taking down Chowkats or frames exc exceeding 1.5 Sq. M but n exc 4.0 Sqm each (Without taking off shutters from the frame)

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Providing and fixing aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperature including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed. catalouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom - 20957, Three track top/vertical-20958, handle-20606, Interlocking-20605, Top and Bottom - 20604.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

M & L for double action floor spring hydraullically regulated made up to of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed completed all as specified and directed.

M&L for aluminium (extruded section body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutterof 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed completed all as spd and directed.

S&F mild steel mortice lock verticle type size 100mm 4 levers completed all as spd and directed

S & F Sheet glass ordinary quality 5.5 mm thick and glazing with oil putty in squares n exc 0.5 Sqm in each pane completed all as specified and directed.

S & F Sheet glass ordinary quality 3 mm thick and glazing with oil putty in squares n exc 0.5 Sqm in each pane completed all as specified and directed.

S & F rubber beading of suitable size to fix the glasses to aluminium section complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube , supplying & fixing in opeinging all as per specified and directed.

S&F factory made soild PVC Moulded Door Shutter, with particle board core 28mm to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the fron face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site all as per specified and as directed. (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Aluminium Handles 150 mm - 2 nos per leaf

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bar or grating complete all as specified and directed by Engr-in-Charge.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F prepainted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall ,fixed with self tapping screws as specified including dismantling of Asbestos cement sheeting any gauge, thickness as in roof covering complete all as specified and as directed

M&L for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and as directed

S&F Plates Fe-410W(GdeE-250) Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated complete all as specified and as directed

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc complete all as specified and as directed

M&L for PCC in post and struss type B1 1:2:4 (20mm graded aggregate) all as specified and as directed

Demolition of cement concrete (un-renforced )in ground floors not exc 15 cm in thickness (below or above ground level), complete all as specified and as directed. (Note : All the demolished material will be disposed off outside the MOD land).

M&L 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed.

M&L 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) laid in alternate panel in floorings including finishing the surface even and smooth without using extra cement, as in plinth protection, complete all as specified.

Supply and fixing only plastic dividing strips,1.5 mm thick and 38mm wide inserted in position confirm to design complete all as specified and directed by Engr-in-Charge.

M & L Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling complete all as specified and directed.

M&L Preparation of newly or previously untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.

M & L preparation of old steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint including preparation of the surfaces.

M & L for preparing old painted steel and iron surfaces of any description, not exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

M & L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Taking up or down existing steel/PPR tubing and connections, 25 or 32 mm bore of pipe and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-Charge

S&F 3- layer PP-R Polypropylene random copolymer) pipes 25mm dia SDR 7.4 & SDR 11 UV stabilized and antimicrobial wilded having thermal stability for hot & cold water supply including all PP-R plain an brass threaded polypropylene random fittings fixed complete to wall , ceiling or in floor etc all as specified and directed

Description all as per above item No 65 but 32 mm bore complete all as specified and as directed

S&F in repair 25mm outer dia PPR Gate valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.

S&F vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including provn of lime concrete bedding and taking down existing of any description/size includeing 600mm long body P trap fixed with IWC complete in all respect all as specified. Make : Cera (Calina S3010102) or Hindware (Orissa Pan Eco) equivalent from Parryware

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware (Sleek Essence Dual Flush) or Cera (Corona) or Prayag (Vintage) equivalent from Parryware

S&F in repair Bib taps, CP, fancy type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F in repair Angular Stop Cock, CP, fancy type with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.

S&F in repair PVC connections 15mm size with brass nuts of length 450mm complete all as directed and specified.

S&F in repairs vitreous china wash hand basin white flat back of size 580x450mm including brackets and CP waste coupling and making good to disturbed portion including PVC connection and PVC waste pipe etc complete all as specified and directed by Enge-in-Charge. Make:Parryware/Hindware/Cera

S&F for 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified.

S & F of ISI marked Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F in repairs PVC(HDPE) SWR 75 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, laid in trenches or in floor complete all as specified and directed by Engr-in-Charge.

S & F in repairs 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per manufacture instruction, including all fitting elbow, tees, sockets, bends etc. laid in walls & floors for connecting bottle traps & nahani trap complete all as specified.

M&L PVC (SWR) 75 mm dia floor trap with plain with grating including jointing with solvent cement complete all as specified and directed.

S&F grating doom 75mm dia of PTMT (min weight 25gms) complete as specified and directed

S&F PVC (SWR) 75 mm bore vent cowl complete all as specified

Taking down Shutters of any description exc 2.0 Sqm each incl complete all as specified and directed and directed.

S&F Steel windows with side hung hutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F for 35mm thk 2nd class hard wood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces and fixed to chowk with following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed including hacking out old glass.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

S&F in repairs PVC(HDPE) SWR 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, laid in treches or in floor complete all as specified and directed by Engr-in-Charge.

S & F in repairs 110 mm bore PVC (SWR) single socleted in any length with rubber rings joints, fixed to walls and vent pipe as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F PVC (SWR) 110 mm bore vent cowl complete all as specified

S&F PVC (SWR) 100 mm 'P' traps complete all as specified

Demolition of brick work/stone work built in cement mortar incl all quoins, arches, pillars, etc complete all as specified and directed by Engr-in-Charge.

M&L Sand filling 50 mm thick under floors or in foundations including watering and consolidation complete all as specified & directed.

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 with grey cement and pigmentas specified & as directed by Engr-in-Charge.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protection Complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L Walling of random rubble stone masonry, uncoursed welll bonded, and solidly hearted, built in CM 1:6 all as specified and directed

M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in cills, benching and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work Complete all as specified and directed by Engr-in-Charge

M & L for reinforced Cement Concrete 1:2:4 type B1 using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M & L for precast Cement Concrete 1:2:4 type B1 using 20mm graded aggregate as in landings, cover (for manhole etc) chullah hoods, chajja, water troughts, shelves and similar articles with plain faces, setting in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed

Demolition of Reinforcement cement concrete in any description and any position not otherwise specifically provided for.

Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed .

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection complete all as specified and as directed .

M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate complete all as specified and directed.

M&L for 15 mm thick rendering on other than faces of stone masonry works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed

M&L for 5 mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1: 3 complete all as specified and as directed

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage

Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.

S&F for 35mm thick 2nd class hard wood plain framed factory made paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F for 30mm thick 2nd class hard wood plain framed factory made glazed and skeletion window / ventilators shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats , complete all as directed by Engr-in-charge.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F100mm long mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized completeall as specified and as directed..

S&F 75mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories, including dismantling of existing water tank exc 250 & n exc 500 litre and removing to storel all as specified.all as specified.

Taking up or down 15 mm bore steel tubing and connections and set aside for re-use or removal to store

S & F 15mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge)

PVC (SWR) 'S’ trap of 125/110 mm bore complete all as specified and as directed.

M&L for PVC (SWR) pipe single socketed, 110mm soil, waste and rain water dranage pipes laid in trenches and jointed all as specified including dismantling etc complete all as specified and as directed.

M&L for Cast iron Nahani trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

M&L for PCC 1:4:8 TYPE D-2 (40mm gradded aggergate) bed to drain pipe incl packing under and hanching against side after they are laid and tested up to 110mm dia pipe including dismantling complete all as specified and as directed.

M&L for PVC (SWR) pipe single socketed, 75mm dia soil, waste and rain water dranage pipes fixed to walls all as specified including dismantling etc .

S & F in repairs, 32mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and as directed.

S & F in repair fancy type 15 mm bore Stop valves, chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs, 15mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe)

M&L for preperation of new plastered wall surface of any description and applying three coat of white wash complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applying two coat of white wash complete all as specified and as directed.

M & L for two coat of cement base paint on newly plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying UG cavble in trenches on plan and n exc 1.5 m in depth in any type of soil and getting out all as specified and directed by Engr-in-Charge.

M&L for Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25m, complete all as specified.

M&L for Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the strating point, complete all as specified.

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified. Note : Punned thickness of 18 CM will be measured and paid for.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flate size 250mm x 150mm x 40mm, complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-

One light/exhaust fan point controlled by one way switch

One switch socket outlet 6 Amps, 230 volts point on Same board

One switch socket outlet 6 Amps, 230 volts point on independent board

All as per above item Ser No 147.00 above, but using cables 4 Sq mm size

Supply and fixing in replacement of lamp holder insulated body with back plate complete all as specified and as directed.

Supply and fixing in replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.

Supply and fixing in replacement of switch Socket combination out let 5 pin 6 Amps flush type.230 volts complete all as directed.

Supply and fixing in replacement of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as directed.

Supply and fixing in replacement of Ceiling rose, surface Bakelite three terminals complete all as directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SPN 63 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as directed.

Supply and Fixing only in Replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply & Fixing in Replacement of LED light fitting 1X9 W/ 1X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F for Recess mounting LED light fitting 36Watt incl. seperate electronic driver & high brightness SMD LEDs ultra modern suitable for armstrong /grid /POP ceilling in MS housing with high brightness 4000K LEDs suitable for 230 Volt 50 Hz Diffused type optics 2'x2 ' in size complete with all accessories internaly prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete .

S&F LED bulk head light fitting 1x9watt 230 volt attractive wall/ceiling mounted any type with white reflactor complete with all accessories pre-wired and including connecting up with twin core twisted flaxible copper conductor cable complete all as directed.

Supply & Installation ,testing and Commissioning in replacement of LT Panel cubical type out door floor mounted weather proof totally enclosed, (CPRI approved) factory made and made out of 3 mm thick CRCA powder coated sheet and angle iron complete with bus bar of copper of suitable size for capacity 350 Amps 3 Phase and Neutral 415 Volts 50 Hz mounted on epoxy type insulators with PCC flooring and angle iron base frame complete all as directed by the Engr-in-charge including fallowing accessories:- a) MCCB 250 Amps Cap 4 Pole 36 KA 415 -1 No for( I/C) (b) MCCB 125 Amps Cap 4 Pole 36 KA 415 -1 No for(O/G) (c) MCCB 100 Amps Cap 4 Pole 36 KA 415 -2 No for(O/G) (d) MCB TPN 63 Amps 4 pole 25 KA 415 Volts - 2 Nos (e) Digital Volt meter with sellector switch(0-500V) - 02 Set (f) Digital Amp meter with sellector switch with necessary CT (0-800A) - 02 Set (g) LED indicating lamp - 02 Set Note :(i) The rates deemed to be inclusive of suitable size copper wirinng/copper strips from Main I/C MCCBs to Channge over switch, Change over switch to Main Bus bar and Bus Bar to Outgoing MCCBs complete all as specified and directed. (ii) The design of Panel, Make of complete accessories and drawing of the LT Panel should be submitted by the contractor for pre-approval from the Engineer-in-cfharge before order and execution at site.

Supply, fix and replacement of off load change Over 200 Amps complete all as specified and directed by Engr-in-Charge.

S&F Sub main wiring with two run of 6 Sqmm (2x 6 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6 Sqmm (1x 6 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x 6 Sqmm), one run of 6 Sqmm (1x6 Sqmm) cable and one metre of PVC casing caping will be measured as one unit.

Supply fix and replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 Core complete all as specified and directed by Engr-in-Charge.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 5 of MES plate No. 6 and all as specified.

S&F in replacement of double door bus bar chamber size 600 x 450 x 300mm outdoor type made out of MS sheet 2.0 mm thick mounted on angle iron frame duly painted with two coat of synthetic enemelled paid over a coat of primer and comprising of three phase aluminium bus bas 200 Amps mounted on insulator including provision of foundation all as specified and directed by Enge-in-Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified.

Supply and laying in trenches or passing through pipe or fixed on surface XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of size 35 Sqmm 4 Core complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of MCB SPN 40 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Supply and laying in trenches or passing through pipe or fixed on surface XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of size 10 Sqmm 2 Core complete all as specified and directed by Engr-in-charge.

M/S MA CONSTRUCTION Co

M/S MUNEER HASSAN AKHON

M/S SONAM RIGZIN

M/S JAVED CONSTRUCTION COMPANY

CHHIRPON BUILDERS

Takshos Enterprises

ABID CONSTRUCTION COMPANY