Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2 L
Closing Date
23 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GEN WORKS
26 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
NOTE: If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
The tenderer should have minimum valid 'B' Grade Electrical Contractor's License issued by State Electrical Licensing Board. The License should have been issued on a date prior to the date of Tender opening. Clear scanned copy is to be submitted along with the tender.
Definition of Similar Nature of Work :- Works of wiring / cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipments ) for 230V, 1 phase or 415V, 3phase system or higher voltages.
96 conditions · 7 needing a document upload
Uploading of Declaration regarding Employment of Retired Engineer/Retired Railway Officer as per clause no.17 of Part-I of IRSGCC. [in the format attached in - Documents]
Uploading of NEFT FORM - as per the format attached with the tender document.
The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
Uploading of Statement Showing the particulars of Works on Hand & Works Completed as per the format attached to the tender document.
Uploading of certificate by local suppliers in regard to meeting the Minimum Local Content requirement to avail benefits under Public Procurement Policy Order-2017 (A) for procurement order of value less than Rs. 10 crores: self certificate in accordance with Para-9(a) of Public Procurement(Preference to Make in India) Order 2017. (B) For Procurement Order of value more than Rs. 10 crores, the certificate from Statutory auditor/cost auditor/practicing CA as the case may be in accordance with Para-9(b) of Public Procurement (Preference to Make in India) Order 2017.
In case tenderer is JV Firm : The tender form shall be submitted only in the name of the JV and not in the name of any constituent member.
Uploading of Certificate in support of Technical Eligibility (As detailed in Standard Technical Criteria).
Submission of Certificate(s) in support of Financial Eligibility (As detailed in Standard financial criteria).
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 20 CRORES: Bid capacity is applicable, the tenderers should submit proforma attached in DOCUMENTS. In case, the tenderer/s failed to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered). [iv]An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India / any State Govt. from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv) copy of PAN number of the Company.
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents.
In case one or more members is/are Proprietary Firm or HUF, the following documents shall be enclosed:: A copy of notarized affidavit on Stamp Paper declaring that his/her Concern is a Proprietary Concern and he/she is sole proprietor of the Concern OR he/she is in position of "KARTA" of Hindu Undivided Family (HUF) and he/she has the authority, power and consent given by other partners to act on behalf of HUF.act on behalf of HUF.
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted:]:(a)A copy of the Partnership Deed, (b)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper, (c)A copy of Power of Attorney (duly registered as per prevailing law) in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm.
In case one or more members of the JV is/are companies, the following documents shall be submitted: (a)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (b) A copy of Memorandum and Articles of Association of the Company. (c) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company.
The Bid Security/EMD shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond in favour of FA&CAO/C/SC from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA and shall be valid for a period of 90days beyond the bid validity period.
IN CASE OF SINGLE PACKET TENDERS; CONSORTIUM AGREEMENTS, JOINT VENTURE FIRMS AND MOUS SHALL NOT BE CONSIDERED
IN CASE OF TWO PACKET TENDERS CONSORTIUM AGREEMENTS AND MOUS SHALL NOT BE CONSIDERED . BUT JOINT VENTURE FIRMS ARE CONSIDERED FOR ELIGIBILITY.
CONDITIONS FOR PARTICIPATION OF PROPRIETARY FIRM / PARTNERSHIP FIRM /PRIVATE LIMITED COMPANY / LIMITED COMPANY/ JV FIRMS:
In case the tenderer is an individual / proprietary concern, the experience and turnover shall be in the name and style of the Individual / Proprietary concern only.
In case the tenderer is a Partnership Firm, the experience and received contractual payments shall be in the name and style of the firm only. The other guidelines at Clause 18 of Part I of 4.1.1 IRSGCC 2022 shall be applicable . Note: The partner of a Partnership Firm cannot claim the credentials of Partnership firm to the extent of his share either during the subsistence of the Partnership firm or after its dissolution.
FOLLOWING DOCUMENTS SHALL BE ENCLOSED:
In case the Tenderer is a Partnership Firm: [i] Partnership deed . [ii]Power of Attorney (duly registered as per prevailing law) in favour of an individual to sign the tender documents and create 4.2.1 liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered).
In case the Tenderer is a Company registered under Companies Act-2013:(i) the copies of MOA (Memorandum of Association) and AOA (Articles of Association) of the company; and (ii) A copy of Authorization/Power of Attorney issued by the Company 4.2.2 (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iii) copy of PAN number of the Company.
In case of JOINT VENTURE (JV) FIRMS: Clause No.17 of Part-I of IRSGCC- 2022 with upto date correction slip shall be applicable in all aspects for Participation of Joint Venture[JV] firms in works tenders. JV firm should submit Memorandum of 4.2.3 Understanding[MOU] as per the format attached as annexure to the tender in DOCUMENTS. Submission of all other documents by JV firm / Members of JV should also be as per Cl.No.17.14 of Part-I of IRSGCC-2022.
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) a copy of LLP Agreement, (ii) a copy of Certificate of Incorporation; and (iii) a copy of Power of Attorney/Authorisation 4.2.4 issued by the LLP Firm in favour of the individual to sign the tender on behalf of the LLP Firm and create liability against the Firm. (iv) copy of PAN number of the LLP Firm
In case the Tenderer is a Registered Society & Registered Trust: (i) a copy of the Certificate of Registration, (ii) Deed of Formation; and (iii) a copy of Power of Attorney in favour of the 4.2.5 individual to sign the tender documents and create liability against the Society/Trust. (iv) copy of PAN number of the Society/Trust.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Uploading of other relevant documents connected to the tender; such as Declaration regarding employment of Retired Engineer/ Retired Railway officer, NEFT Form, List of Personnel/Organization, List of Plant/machinery, Particulars of works on hand and completed (As per the formats attached in the list of Documents)etc.
Electrical Construction/BZA - Guntur division - Guntur - Guntakal Doubling with Electrification Project (401.47 kms) - Electrical arrangements for proposed construction of Officers Rest House, Sub-Ordinate Rest House, ADEN office & SSE/P.way office etc. at Markapur including highmasts etc.
04-2025-2026-E-GS-CN-BZA~SCR
04-2025-2026-E-GS-CN-BZA
Open
Works - General
6 Months
Unknown (Unspecified Location)
₹0
₹2 L
23 Jan 2026
31 Dec 2025
9 Jan 2026
207 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,00,01,869 | ||
| — | Item Breakup | for details. | — | ||
| "Supply and laying of 32mm dia 2mm thick surface P.V.C. pipe (ISI MARK) with all required accessories such as deep boxes, bends, junction boxes etc. including grooving (if required), including masonry work and labour charges etc. " | — | — | — | 36,000 | |
| — | Item Breakup | for details. | — | ||
| "Supply and laying of 25mm dia 2mm thick P.V.C. pipe (ISI MARK) concealed in roof slab and wall with all required accessories such as deep boxes, bends, junction boxes etc. including grooving (if required), including masonry work and labour charges etc." | — | — | — | 54,000 | |
| — | Item Breakup | for details. | — | ||
| "Wiring with two runs of 1.5 Sq.mm 1100V and one run of flexible copper conductor 1.5Sq.mm 1100V FRLS PVC insulated wires ISI marked (Phase, neutral and earth) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, 6A Bell push modular type switch, ceiling rose, bulb holder and modular type plate cover to G.I switch control box includingWiring with two runs of 1.5 Sq.mm 1100V and one run of flexible copper conductor 1.5Sq.mm 1100V FRLS PVC insulated wires ISI marked (Phase, neutral and earth) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, 6A Bell push modular type switch, ceiling rose, bulb holder and modular type plate cover to G.I switch control box including all labour charges complete for light points, ceiling fan points and exhaust fans points etc. all labour charges complete for light points, ceiling fan points and exhaust fans points etc" | — | — | — | 1,63,100 | |
| — | Item Breakup | for details. | — | ||
| "Supply, fixing, connecting and commissioning of 6A 5 pin modular plug socket with 6A modular control switch on existing control board with wiring " | — | — | — | 27,221 | |
| — | Item Breakup | for details. | — | ||
| "Supply and fixing of 16A 5 pin flush power plug and socket and 16A switch control (5 in one) GI box with Top plate cover control for power plug point connection and all labour charges etc. " | — | — | — | 19,089 | |
| — | Item Breakup | for details. | — | ||
| "Supply and fixing of 20/32/40 Amps metallic plug & socket (industrial type) with 25/32 Amps SP MCB housed in GI switch box with necessary connections. " | — | — | — | 25,540 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and connecting and commissioning of industrial plug & socket combined unit IP 66, 5 pin 63 A capacity (Three Phase+Neutral+Earth 440 volts) and 63 A 4 pole D curve MCB including all connected accessories etc. | — | — | — | 9,947 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and connecting and commissioning of industrial plug & socket combined unit IP 66, 5 pin 32A capacity (Three Phase + Neutral+ Earth 440 volts) and 32 A 4pole MCB including all connected accessories etc. | — | — | — | 5,918 | |
| — | Item Breakup | for details. | — | ||
| "Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties extenstion wires etc for fixing), has to be as per the specification enclosed. " | — | — | — | 66,880 | |
| — | Item Breakup | for details. | — | ||
| "Supply and Fixing of 4 feet 20W LED tube light with Radar motion sensor. The fittings have to be fixed on the wall / Ceiling / FOB with suitable clamps. CCT 5700 K -6200 K Luminious flux : 1400-1600 Lpm , Input Voltage : 100-240 V , 50 Hz Power factor > 0.9, SMD LED 3014:117 Pcs , BEAM angle :180, CRI>71. Ingrees protection: IP20, base : Aluminium alloy housing cover : Forsed , PVC lamp holder : PC /ABS , Action distance : phase 3 t6 m .Suitable Box type fittings for LED lamps has to be supplied by the contractor. Has to be as per the specification enclosed. " | — | — | — | 9,486 | |
| — | Item Breakup | for details. | — | ||
| "Supply, fixing, connecting and commissioning of 35/36W LED Panel light fitting 2'x2' square type White with other connected accessories etc. has to be as per the specification enclosed." | — | — | — | 55,060 | |
| — | Item Breakup | for details. | — | ||
| "Supply, fixing, connecting and commissioning of Recess mounting 15 w LED slim round down lighter with all connected acessories.conforming to IEC 60598-1, has to be as per the specification enclosed." | — | — | — | 34,500 | |
| — | Item Breakup | for details. | — | ||
| "Supply, fixing, connecting and commissioning of 1x1 ft 22 watts LED ceiling light fitting consists of input voltage of 230 V AC supply, Frequency 50 Hz with other connected accessories etc. has to be as per the specification enclosed." | — | — | — | 66,164 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and commissioning of 3 W LED bulb for night light. has to be as per the specification enclosed. | — | — | — | 2,520 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of suitable glass/fiber for night foot light as per the instructions of site Engineer | — | — | — | 5,670 | |
| — | Item Breakup | for details. | — | ||
| "Supply, fixing, testing and commissioning of decorative gate light fixture made up of high grade unbreakable polycarbonate material suitable for retrofit LED bulb, has to be as per the specification enclosed. " | — | — | — | 4,548 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and commissioning of 20 W LED bulb for gate light. | — | — | — | 2,610 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, connecting, testing and commissioning of Decorative, Dust Resistant, ceiling fan of Energy Efficiency BEE 5 Star Rating, Fan motor of inverter drive controlled by microprocessors (BLDC) 3 Fan blade of Sweep size 1200 mm Rated voltage of 230V, 48-52HZ, power factor > 0.9, Air delivery of 230 cfm, max. power consumption of 35 W motor speed of 385 RPM with speed control operating temperature within 2 degree of ambient. Warranty shall be 5 years from the date of supply. Authorized OEM certificate and Test certificate from NABL accreciate laboratory to be submitted along with supply. | — | — | — | 1,84,250 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and connecting of down rod of size 1/2" dia 2 1/2 ft length MS steel pipe with all connected accessories | — | — | — | 1,420 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of ceiling fan D hooks with anchor bolts including all connected accessories | — | — | — | 2,500 | |
| — | Item Breakup | for details. | — | ||
| "Supply, fixing, testing, connecting and commissioning of wall mounted fans 400mm (16"") Sweep to work on 230 Volts 50 Hz power input 50 watts, speed 1360 rpm, Air Delivery 72 (CMM), Jerk free oscillation and smooth running, Aerodynamically designed, balanced, heavy duty PP blades and Superior low voltage performance etc. " | — | — | — | 27,276 | |
| — | Item Breakup | for details. | — | ||
| Supply of Pedestal fans of 400 mm (16") sweep | — | — | — | 9,412 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of BLDC star 200 mm 20W 1600 RPM Exhaust fans including necessary plastering,Massinory work and clamps nuts bolts etc. | — | — | — | 37,044 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, connecting and commissioning of Energy Efficient Exhaust fan of 300 mm sweep with louvers including necessary holes and masonary work etc. | — | — | — | 27,624 | |
| — | Item Breakup | for details. | — | ||
| "Design, supply, fabrication, fixing of MS sheet, MS flats of suitable size and 3mm thick with powder quoting to fix on the wall for mounting of Exhaust Fan. The contractor shall attend the masonry work for mounting the MS sheet on the wall complete with all accessories etc." | — | — | — | 1,464 | |
| — | Item Breakup | for details. | — | ||
| Supply, laying, connecting and commissioning of single core 1.5 Sq.mm. 1100 PVC (FRLS) insulated multi stranded copper conductor wires confirming to IS:694/1990 and ISI marked in existing PVC conduit pipe. | — | — | — | 9,600 | |
| — | Item Breakup | for details. | — | ||
| Supply, laying, connecting and commissioning of single core 2.5 Sq.mm. 1100 PVC (FRLS) insulated multi stranded copper conductor wires confirming to IS:694/1990 and ISI marked in existing PVC conduit pipe. | — | — | — | 70,200 | |
| — | Item Breakup | for details. | — | ||
| Supply, laying, connecting and commissioning of single core 4.0 Sq.mm. 1100 PVC (FRLS) insulated multi stranded copper conductor wires confirming to IS:694/1990 and ISI marked in existing PVC conduit pipe for circuit points. | — | — | — | 50,400 | |
| — | Item Breakup | for details. | — | ||
| Supply, laying, connecting and commissioning single core 6 Sq.mm. 1100 V PVC (FRLS) insulated multi stranded copper wires confirming to IS:694/1990 and ISI marked in existing PVC pipe for sub distribution boards as run of supply mains/higher including all labour charges. | — | — | — | 27,900 | |
| — | Item Breakup | for details. | — | ||
| "Supply, fixing, connecting and commissioning of Occupancy SENSORS complete with all other connected accessories etc. as per specification enclosed" | — | — | — | 35,100 | |
| — | Item Breakup | for details. | — | ||
| Supply, laying, connecting, testing and commissioning of 4 core 120 Sq.mm. LT XLPE UG cable 1100 Volts as per IS:7098/Part-I/1988 or latest including all necessary accessories etc. | — | — | — | 5,00,400 | |
| — | Item Breakup | for details. | — | ||
| Supply, laying, connecting, testing and commissioning of 4 core 50 Sq.mm. LT XLPE UG cable 1100 Volts as per IS:7098/Part-I/1988 or latest including all necessary accessories etc. | — | — | — | 3,46,400 | |
| — | Item Breakup | for details. | — | ||
| Supply, laying, connecting, testing and commissioning of 4 core 25 Sq.mm. LT XLPE UG cable 1100 Volts as per IS:7098/Part-I/1988 or latest including all necessary accessories etc. | — | — | — | 1,48,000 | |
| — | Item Breakup | for details. | — | ||
| Supply, laying, connecting, testing and commissioning of 4 core 16 Sq.mm. LT XLPE UG cable 1100 Volts as per IS:7098/Part-I/1988 or latest. | — | — | — | 1,12,000 | |
| — | Item Breakup | for details. | — | ||
| "Supply and fixing of GI wire of size 8 SWG for providing earthing interconnections along the UG cables with all other connected accessories " | — | — | — | 45,000 | |
| — | Item Breakup | for details. | — | ||
| "Supply and laying of 50 mm dia of B class GI pipe including all accessories etc. " | — | — | — | 19,500 | |
| — | Item Breakup | for details. | — | ||
| "Supply and laying of 100 mm dia B class GI pipe including all accessories etc. " | — | — | — | 15,100 | |
| — | Item Breakup | for details. | — | ||
| "Supply and laying of HDPE pipe of PE-80 grade in PN-4 size 4"" inner dia and outer dia 110 mm and wall thickness minimum 4.3 mm, maximum 4.8 mm with 'T' joints, bolts, elbows etc. including all other connected accessories " | — | — | — | 1,66,200 | |
| — | Item Breakup | for details. | — | ||
| Supply and laying of HDPE pipe of PE-80 grade in PN-4 size 2" inner dia and outer dia 63 mm and wall thickness minimum 2.5 mm, maximum 2.8 mm with 'T' joints, bolts, elbows etc. including all other connected accessories. | — | — | — | 1,76,000 | |
| — | Item Breakup | for details. | — | ||
| "Supply and fixing of HDPE Pipes of PE-80 Grade in PN- 4 outer dia 50mm (nearest 1½"" dia) wall thickness minimum 2.3 Maximum 2.8 complete with all other connected accessories like bends, joints etc. o" | — | — | — | 64,000 | |
| — | Item Breakup | for details. | — | ||
| Excavation of cable trench in ordinary soil to depth of 1250x450mm filling the trench (after laying the cables) to bring the original condition | — | — | — | 2,60,000 | |
| — | Item Breakup | for details. | — | ||
| "Excavation of cable trench under rock/CC/Tar/RCC road/Track and making good providing cement concrete after laying the cable.The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site." | — | — | — | 2,08,800 | |
| — | Item Breakup | for details. | — | ||
| Horizontal drilling for HT/LT cables of suitable size as per the guideline of Site Engineer | — | — | — | 2,15,700 | |
| — | Item Breakup | for details. | — | ||
| "Supply and fixing of HT/LT cable route indicators Including all accessosries. " | — | — | — | 76,788 | |
| — | Item Breakup | for details. | — | ||
| Supply & fixing of 8 way Vertical TPN distribution board fixed on wall with the following switches 1x160 Amps 25 KA 4 pole MCCB for incoming and 4 Nos. of 63 Amps TP MCB, 4 Nos of 32 Amps TP MCB, 4 Nos. of 20 Amps DP MCB, 4 Nos of 10 A SP MCBs for outgoing. | — | — | — | 2,96,646 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 6 way TPN double door with lock & key distribution board with 1x32 TP RCCB for incoming and 3 Nos. of 20 Amps SP MCB, 6 Nos. of 20 A SP MCBs outgoing including internal connections, grouting, earthing, fixing, testing and all labour charges etc. including cable entry box and trunking arrangement. | — | — | — | 47,064 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, testing and connecting of 4 way ETPN distribution board with one No. of 80 Amps 4 pole RCCB for incoming, 2 Nos. of 32 Amps SPMCBs, 8 Nos of 16 Amps SPMCBs for outgoing. | — | — | — | 47,904 | |
| — | Item Breakup | for details. | — | ||
| "Supply, erection and commisioning of 5 mtr long dip galvanised octagonal pole with 130 mm bottom A/F & 70 mm top A/F made up of 3 mm thick HT sheet along with base plate of size 200x200x12mm, M16x600 long 'J' type EN 8 grade foundation bolts, 1000 mm long single/double arm bracket (as per site requirement) with concrete foundation and plinth in hard soil including excavation of soil, tamping of concrete grouting with Bakelite sheet and MCB (for mounting inside the base compartment of Pole) with all necessary accessories etc. " | — | — | — | 5,85,235 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, testing and commissioning of 40 Watts AC LED street light luminaries with glass IP 65 including all connected accessories etc. as per enclosed specification | — | — | — | 1,11,300 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and commissioning of 1.2 mtr/required length of ISI marked 'B' class GI pipe/Bracket (as necessary) of 2" dia/suitable dia for fixing of LED street light fitting on wall with clamps, bolts and nuts etc. including internal connections complete | — | — | — | 3,900 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, installation & commissioning of 2 Ton 5 star capable of delivering 24000 BTU/hr and above with operating on refrigerant R-410A/R-32 INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and required length of 4 core copper flexible chord with cordless remote control etc. inclduing suitable wall mounting bracket for fixing of outdoor unit, dual barrier coating in order to protect coil from oxidigation. | — | — | — | 2,50,000 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, testing, connecting and commissioning of 1.5 Ton capacity Hi wall split inverter Airconditioner 5 star rated with hermitically sealed Copper Condensor and ISEER > 5.5, R-32 Refrigerantincluding all accessories & fixing of Outdoor Mounting Stand etc. with required lenght of the cablesbetween indoor and outdoor units Note: (1) AC unit supplied to railways must match with the BEE StarRating valid as on the date of supply. (2)The Product must be registered, on the name of Consignee, withOEM, after successful installation | — | — | — | 1,10,356 | |
| — | Item Breakup | for details. | — | ||
| Supply, installation, testing, gas charging & commissioning of 2 Ton BEE 5 star Inverter type copper wound Cassette type AC unit with all connected accessories. | — | — | — | 4,55,680 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Extra Copper pipe for Split AC (if required as per condition) | — | — | — | 47,500 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, testing and commissioning of 5 star rated 15 Litres capacity vertical mounting type fibre body Geyser for hot water including all other connected accessories to work on 230 V AC supply. | — | — | — | 95,186 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, connecting and commissioning of SMC cable termination junction Box of size 250x200x105 with shock proof, rust proof, fire resistant, weather proof with IP65 potection suitable for termination of 2/4 core LT UG cables upto 70 sq.mm., 3 phase 415 volts including hylam sheet, heavy duty terminal connections, clamping arrangements etc. | — | — | — | 69,300 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, connecting and commissioning of SMC cable termination junction Box of size 340x200x105 with shock proof, rust proof, fire resistant, weather proof with IP65 protection suitable for termination of 2/4 core LT UG cables upto 150 sq.mm., 3 phase 415 volts including hylam sheet, heavy duty terminal connections, clamping arrangements etc. | — | — | — | 20,800 | |
| — | Item Breakup | for details. | — | ||
| Supply, wiring & fixing of Ding dong call bell including all accessories. | — | — | — | 2,070 | |
| — | Item Breakup | for details. | — | ||
| Supply, wiring & fixing of TV socket with 10 mtrs. Length of dish cable including all accessories | — | — | — | 1,870 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, connecting and installation of self contained drinking Water cooler storage capacity of 150 Ltrs. confirming to IS:1475 (part-I) 2001 suitable for operation on 230 V +10%, 50 Hz, Single phase AC supply with latest amendments etc. | — | — | — | 1,38,138 | |
| — | Item Breakup | for details. | — | ||
| Design, fabrication, erection and commissioning of 12 mtrs. High Mast system, hot dip galvanised with all accessories along with the following for each High Mast as per specification enclosed, as desired by site engineer. a) Head frame, steel wire rope, double drum winch lantern carriage suitable for 6 luminaries symmetrically including control gear boxes and lighting finial with all accessories- 01 set b) Design and casting of suitable cement concrete shallow foundation for high mast. The safe bearing capacity of the soil is 10T/sq.m - 01 set c) Foundation bolts, manufactured from special steel along with nuts, washers, anchor plates, templates complete set as required for each mast - 01 set. d) High powered nonreversible power tool complete with all accessories - 01 set. e) Aviation obstruction lighting system complete - 01 set f) Supply, erection and commissioning of 4 way LT control panel in IP54 construction along with 02Nos. of automatic timer switches and 01 No. of 63A TPN, 10KA MCB and 01 No. of multiple plug socket witll all accessories | — | — | — | 4,28,588 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and connecting of 120W LED flood light fitting with all accessories (Wall/Terrus/Columns/ Tubular pole/ Rail pole/ Galv.pole etc., | — | — | — | 75,660 | |
| — | Item Breakup | for details. | — | ||
| Supply, fabrication and erection of protective fencing around the high mast with 50mm dia x 1.5 mtrs. long medium class GI pipe 10 Nos. and ornamental chain made of 5mm dia rod shackles and length of not less than 18.5m of each round including all masonry works for retaining wall as per site required. | — | — | — | 9,878 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of Earth electrode of 48.4 mm outer dia & 40 mm inner dia, 3.1 m long steel tube galvanised with welded MS galvanised lug as per drawing No. ETI/OHE/P/7021 & RDSO specification No. TI/SPC/PSI/ERTHNG/0210 or latest including excavation of pit, protective concrete box with cover and all other connected materials like GI wire, charcoal, salt etc. | — | — | — | 38,140 | |
| — | Item Breakup | for details. | — | ||
| Supply erection, testing and comissionin of Maintenance free earthing with earth electrode of low carbon steel rod of 3 mtrs long and 17.2mm dia with 250 Microns thick copper coating with 2 bags(each 10Kg) of LORESCO back fill compund with all necessary accessories complete according to IS 3093 | — | — | — | 28,626 | |
| — | Item Breakup | for details. | — | ||
| Design, fabricaton, transportation, supply, erection, connecting and commissioning of LT Panel 3-phase and neutral 415V, 4 wire, free standing floor mounted, LT Panel made out of 16SWG CRCA sheet after SEVEN TANK PROCESS and painting with EPOXY powder coating. The panel shall consist of suitable rating TPN Copper busbas supported with DMC/SMC barriers and colour coded with Heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short circuit withstanding capcity of minimum 50KA. The insulation level of the panel shall withstand to 2.5KV (RMS) power frequency test and consist of the switch gear as mentioned belwo. The panel shall be mounted on channels including supply and fixing as per specification. The complete work has to be carried out by the contractor including masonry work. After execution, all the feeder cables have to be connected to new panel with suitable cable glands and dismantling the existing old LT Outdoor Kiosk/Panel as per the requirement of engineer at site. The panel should be of the following combination of switchgear. For incoming: i) 4Pole-250A-MCCB-36KA-02 Nos. (Microporcessor): ii) BUSCOUPLER 4Pole-250A-MCCB -36ka-01 No (Microprocessor): Outgoings: i) 4Pole-160A-MCCB-36KA-01 Nos (Microprocessor); ii) 4Pole-125A-MCCB-36KA-02 Nos (Microporcessor); iii) 4Pole-100A-MCCB-36KA-01 Nos (Microprocessor); iv) 4Pole-63A-MCCB-36KA-03 Nos v) 4Pole-40A-MCCB-36KA-03 Nos; Incoming MCCB should have Multifunctional meters, indication lamps, voltmeter & ammeter etc and all out going feeders should have Multifunctional meters. Multifunctional meters (such as Voltage, Current, Frequency, P.F, Power& Energy) with 3lines LCD display in 96x96sq.mm flush mounted case, accuracy class 0.5, LED phase indication lamps, and suitable rated copper TP& N bus bar, and suitable ratio CTs along with selector switches, along with rubber chequered sheets of 25mm thick entire length of the panel complete, as desired by site engineer. Prior approval for panel detailed Drawing shall be obtained from Dy.CEE/C/BZA before fabrication. | — | — | — | 6,00,974 | |
| — | Item Breakup | for details. | — | ||
| Design, fabrication, transportation, supply, erection, connecting and commissioning of LT Outdoor feeder Kiosk 3-phase and neutral 415V, 4wire, free standing floor mounted, LT Panel made out of 16SWG CRCA sheet after SEVEN TANK PROCESS and painting with EPOXY powder coating. The panel shall consist of suitable rating TPN Copper busbas supported with DMC/SMC barriers and colour coded with Heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short circuit withstanding capacity of minimum 50KA. The insulation level of the panel shall withstand to 2.5KV (RMS) power frequency test and consist of the switch gear as mentioned below. The panel shall be mounted on channels including supply and fixing as per specification. The complete work has to be carried out by the contractor including masonry work. After execution, all the feeder cables have to be connected to new panel with suitable cable glands and dismantling the existing old LT Outdoor Kiosk/Panel as per the requirement of engineer at site. The Panel should be of the following combination of switchgear. For Incoming: i) 4Pole-160A-MCCB- 36KA-01 Nos (Microprocessor) Outgoings: i) 4Pole-100A-MCCB-36KA-02 Nos (Microprocessor); ii) 4Pole-63A-MCCB-25KA-04 Nos (Microporcessor); iii) 4Pole-40A/32A-MCCB-25KA-04 Nos; with 03 Nos of Rotary Handles: Multifunctional meters-3 Nos for 100A& above MCCB. Multifunctional meters (such as Voltage, Current, Frequency, P.F, Power& Energy) with 3lines LCD display in 96x96sq.mm flush mounted case, accuracy class 0.5, LED phase indication lamps, and suitable rated copper TP& N bus bar, and suitable ratio CTs along with selector switches, along with rubber chequered sheets of 25mm thick entire length of the panel complete, as desired by site engineer. Prior approval for panel detailed Drawing shall be obtained from Dy.CEE/C/BZA before fabrication. | — | — | — | 2,26,712 | |
| — | Item Breakup | for details. | — | ||
| Supply of safety Insulating mats for use as floor covering for the protection of workers on ac and dc installations with the system voltages up to 11 kV ac and 240 V dc and as per Cl 5 of IS15652 latest (1 meterx2meterx2.5mm thickness) | — | — | — | 5,900 | |
| — | Item Breakup | for details. | — | ||
| Supply,Transportation,erectionand Commissioning of 500 LPDTube Collector type SolarWater heating Systemconfirming to IS 16544 withlatest amendments withtemperature application of 60degrees with Stain less steel -304L grade/ Glass lined MSinner tank with PUF Insulationwith suitable pipe connectionfrom Collector to Solar Tankwith electrical Heating back upetc., with 3 years Guaranteefor Solar system and additional2 years warranty. | — | — | — | 1,36,400 | |
| — | Item Breakup | for details. | — | ||
| Supply, installation, commissioning, including transportation of Complete set of 10KW solar photovoltaic ONGRID system including connecting to the existing grid/local supply through suitably designed power conditioning unit (PCU) on the roof top of building. consists of Solar panels,module mounting, junction boxes, power conditioning unit (PCU), Import & Complete set Export metering, cable and other accessories as per RDSO specification No.RDSO/PE/SPEC/PS/0092- 2008 (Rev.0) Amdt.5. or latest. The Solar Photovoltaic System (SPVS) to be erected over terrace of building and the output is to be connected at Main distribution board. | — | — | — | 16,09,026 | |
| — | Item Breakup | for details. | — | ||
| Supply, erection, testing and commissioning of 8W Bollard LED light of height 1.0 mtr for garden lights including all connected accessories | — | — | — | 58,788 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of concealed light chandeliers of model no: DMN-GLD-AS11037 of Jaquar make or its equivalent | — | — | — | 30,000 | |
| — | Item Breakup | for details. | — | ||
| "Supply and installation of CITRA 12 Light White Body Tulip LED Chandelier Ring of 120W 100cm Diameter 12 Light Modern LED Chandelier For Reception Counter lamparas colgantes pendientes Hanging suspension luminaire Chandeliers,High-quality aluminum and acrylic finished by two times powder coating, with suitable drivers with other connected accessories etc. Wattage:120 Watts, Voltage: 240 Volts." | — | — | — | 37,998 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Profile strip light of 240 LED/M with driver including all connected accessories etc. | — | — | — | 30,700 | |
| — | Item Breakup | for details. | — | ||
| Supply, installation and commissioning of LED Rope light (Warm white) as per the direction of site Engineer at site | — | — | — | 4,470 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and commissioning of Decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish suitable for 9W LED lamp | — | — | — | 9,780 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, connecting and commissioning of Bedside Flexible Gooseneck Arm Reading Light,3 Wattconforming to IS:16101 of model no.48042 of Phillips make or it's equivalent with all necessary accessoriescomplete. | — | — | — | 6,114 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, testing and connecting of automatic hand dryer including all other connected accessories to work on 230V AC. | — | — | — | 14,340 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Inbuilt LED Light Bathroom Wall mirror rectangular in shape with touch censor size:18x24 inches. | — | — | — | 18,400 | |
| — | Item Breakup | for details. | — | ||
| Supply of stainless-steel mud/sand proof submersible pump of 2HP vertical Energy efficient submersible pump with a total head of 123Mts with a disscharge of 20LPM at total head suitable to work on 1-Phase with pump maximum outer Dia 98mm as per direction of site Engineer. | — | — | — | 69,000 | |
| — | Item Breakup | for details. | — | ||
| Fabrication, transportation and supply, erection, testing and commissioning of suitable size panel board for single phase submersible motor up to 2 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB, on/off switch including supply & fixing of DOL starter and necessary connected accessories etc. | — | — | — | 19,320 | |
| — | Item Breakup | for details. | — | ||
| Supply & laying of 3 core 4 sq.mm flat cable with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors with voltage grade up to 1100 Volts conforming to and marked with IS: 694 /1990 or latest. | — | — | — | 66,600 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 50 mm size HDPE pipe of Grade PE-100, PN-6 (6KG/CM.Sq cap.) as per IS 4984-1995, complete with all connected accessories required as per site conditions. | — | — | — | 28,350 | |
| — | Item Breakup | for details. | — | ||
| Supply of vertical type energy efficient ISI marked submersible pump set suitable to operate at duty point of 195 mtrs head approx. and 1.25 LPS discharge approx. 7.5 HP/5.5 kW approx. 3- phase motor, 20-25 stage complete with all accessories as per IS 8034.2002, suitable for 150 mm dia borewell and outlet 50 mm dia, complete with all other connected materials and works including all accessories. | — | — | — | 46,810 | |
| — | Item Breakup | for details. | — | ||
| Supply, Fabrication, fixing and commissioning of pump panel suitable for 7.5 HP submersible pump comprising of motor protection circuit breaker, fully automatic star delta starter, BOCR 3DE digital electronic over current relay, 3 KVAR capacitor, ammeter, voltmeter, LED pilot lamps, timer switch complete with all other coonected accessories. | — | — | — | 31,980 | |
| — | Item Breakup | for details. | — | ||
| "Supply of 6 sq.mm 3 core copper flat cable wire, Protection against rain water, Protection against ingress of small solid foreign bodies IS:694:1990. " | — | — | — | 36,900 | |
| — | Item Breakup | for details. | — | ||
| Supply of GI specials of suitable size clamps sets, nipples, bends, couplings, bore cap, bolts & nuts. | — | — | — | 7,860 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of GM Non-return valve suitable for outlet of 50 mm dia. | — | — | — | 3,860 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of G.M. Gate valve suitable for outlet of 50 mm dia. | — | — | — | 3,918 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of OD 75 mm size HDPE pipe of Grade PE-100, PN-10 (10.0 kg/sqcm cap.) as per IS 4984 - 2016,including Joints, bends couplings and all necessary accessories complete as per site conditions. | — | — | — | 52,000 | |
| — | Item Breakup | for details. | — | ||
| "Installation, testing and commissioning of the pump set with necessary clamping arrangements to pipes and connecting to panel board including all other accessories." | — | — | — | 2,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Surveillance security system with 4Pcs 5MP Full HD 8CH DVR Bullet Cameras, 2 Pieces Dome Camera,1TB Hard Disc, CCTV Wire Roll, Power Supply and All Required Connectors.Model No.Hikvision (DS-7208 HQHI-M1/S) /(DS-7B08HQHI-K1) 8CH DVR | — | — | — | 74,397 | |
| — | Item Breakup | for details. | — | ||
| Supply of various sizes of single sided glow sign board(Back lit) with MS box frame along with inside wiring with LED tube Lights 19/20/21Watts, Flex, min 90microns with 4pass printing, 22SWG GI covers with colour coated sheet to frame back side,suitable clamping arrangements for fixing the boards with angulars,nut and bolts, Note:1)Matter will be given by railways 2)Matter should be approved by site supervisor before final printing. | — | — | — | 65,925 | |
| — | Item Breakup | for details. | — | ||
| Supply of Multifunction colour Photocopier Machines A3 printer, Printer -cum-Scanner- cum-Copier with 7 inch screen, as per specification enclosed in tender document. | — | — | — | 1,95,000 | |
| — | Item Breakup | for details. | — | ||
| Supply, Transportation and installation of All-in-One colour printer (Print, Copy, Scan) with duplex, auto document feeder features, as per specification enclosed in tender document. | — | — | — | 96,954 | |
| — | Item Breakup | for details. | — | ||
| Supply of LCD Graphic Digital Light Meter (lux),Power Source : 9V Battery, Angular Incident Light Characteristics : 30 degree Less than+/- 3%, Light Sensor: Silicon Photo Diode , Response Time: 2.5 times/sec, Operating Temperature Range : 0 degC to 50 degC, StorageTemperature Range: -10 degC to 60 degC, Display: LCD Graphic, Relative Humidity: < 80% , Current Consumption : 2mA, Reading DataAccuracy : +/- 4% rdg +/- 5 dgt , Measuring Range Selection, Lux : 2000,Measurement Range Scale: 0.1 - 19990 Lux, Make:Metravi,Tenmars,konica Minolta,Rasayan or reputed make | — | — | — | 40,000 | |
| — | Item Breakup | for details. | — | ||
| Supply of digital insulation tester, 4 voltages, 500/1000/2000/2500 volts 0 to 20,000 mega ohms, resolution of10 mega ohm throughout the range digital complete with all accessories. | — | — | — | 14,320 | |
| — | Item Breakup | for details. | — | ||
| Supply of digital earth tester measurement of earthing resistance in 3 ranges 0-10/0- 100/0-1000 ohmsincluding kits contents 4 MS spikes length 45cms each approx., 1 spike lifting rod, 3 rolls of flexible wire woundon spool (30m app), 5m loose wire, 1 hammer, 1 Rexine carrying case with all accessories. | — | — | — | 12,260 | |
| — | Item Breakup | for details. | — | ||
| Supply of Digital clamp on meter 31/2 digit Similar to Make: Motwane make modelNo.DCM30A | — | — | — | 6,694 | |
| — | Item Breakup | for details. | — | ||
| Aluminium Platform Step Ladder of total extended height of 6 feet. Type of plaftform Step Ladder: Step on one side and rung on other side, Fully extended Height in: 7 feets, Platform Size: 450x300mm, Step width: 2.5inches, Material: Aluminium, Surface finish: Anodized and Maximum Load Capacity: 160kgs & Maximum Weight of Ladder: 14kgs. | — | — | — | 16,500 | |
| — | Item Breakup | for details. | — | ||
| Aluminium Platform Step Ladder of total extended height of 7 feet. Type of plaftform Step Ladder: Step on one side and rung on other side, Extension Mechanism: Yes, Fully extended Height in: 7 feets, Retracted from Height in: 5 feets, Platform Size: 450x300mm, Step width: 11 inches, Material: Aluminium, Surface finish: Powder Coated and Maximum Load Capacity: 160kgs & Maximum Weight of Ladder: 80kgs. | — | — | — | 12,000 | |
| — | Item Breakup | for details. | — | ||
| Aluminium Platform Step Ladder of total extended height of 8 feet. Type of plaftform Step Ladder: Step on one side with no rung, Extension Mechanism: Yes, Fully extended Height in: 8 feets, Retracted from Height in: 2 feets, Platform Size: 450x300mm, Step width: 2.5 inches, Material: Aluminium, Surface finish: Anodized and Maximum Load Capacity: 120kgs & Maximum Weight of Ladder: 10kgs. | — | — | — | 15,447 | |
| — | Item Breakup | for details. | — | ||
| Preparation and submission of completion drawings in A3 size with all relevant details a n d executed Wiring diagrams. The drawings shall be submitted in 1+6 copies etc. along with AUTOCAD CD | — | — | — | 4,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
BLDCFanSwitchesandSocketsSpec.pdf
ATTACHMENT
CopyofLetterregardingRevisedIlluminationlevelsatRailwayStationsoverIR.pdf
ATTACHMENT
CopyofMono-PERCSolar2.pdf
ATTACHMENT
EarthpitSpec.pdf
ATTACHMENT
Techanicalcircular.pdf
ATTACHMENT
NEFTform.pdf
ATTACHMENT
BGform.pdf
ATTACHMENT
IR-GCC2022Updatedwithcorrectionslip.pdf
ATTACHMENT
GCCCORRECTIONSLIPS.pdf
ATTACHMENT
annexures.pdf
ATTACHMENT
StandardLayoutofStationBuilding212_compressed.pdf
ATTACHMENT
TECHANICALCIRCULARSDRAWINGS.pdf
ATTACHMENT
5MOCTAGONALPOLE.pdf
ATTACHMENT
CopyofRailwayBoardLetter2007-Illumination.pdf
ATTACHMENT
CopyofSolarRDSOSpecification.pdf
ATTACHMENT
HIGHMASTDRAWING-FINAL.pdf
ATTACHMENT
LEDSPECLATEST2.pdf
ATTACHMENT
Amendment_CPWD_General_Specification_for_Electrical_Works_Part-I_Internal_2023.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022-POLICY_13.12.2022.pdf
ATTACHMENT
2023_04_ACS-4.pdf
ATTACHMENT
ACS-1toGCC2022.pdf
ATTACHMENT
2023_04ACS-311.pdf
ATTACHMENT
2023ACS-5.pdf
ATTACHMENT
2023_12_ACS-6.pdf
ATTACHMENT
2024_09ACS-7.pdf
ATTACHMENT
2024_12ACS-8.pdf
ATTACHMENT
2025ACS-9.pdf
ATTACHMENT
2025_03_ACS-10.pdf
ATTACHMENT
2023_04ACS-311_1.pdf
ATTACHMENT
tenderSPECIFICATIONSHIGHMAST.docx.pdf
ATTACHMENT
04-2025-2026-E-GS-CN-BZAMarkapurTenderBookletMRK.docx_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .