COMPREHENSIVE AND WELCOME MAINT TO CERTAIN OMQ AND GJ AREA AT AF STATION TAMBARAM

Amount

Taking down old cement plaster of any description,any thickness from external surfaces of walls/soffits etc including racking out joint hacking for keys and scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick on brick/ concrete surfaces with CM 1:4 in two coats (5mm thick settting coat with water proofing compound/liquid as per manufacturer's instructions over 10mm thick backing coat) finished even and smooth without using extra cement including mixing of liquid waterproofing compound as per manufacturers instructions on brick/concrete/masonry or in chajjas/parapet walls etc complete all as specified and as directed by Engineer-in-Charge.

Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 5mm thick in CM 1:3, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistance primer on wall complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint on wall over a coat of primer complete all as specified and as directed by Engineer-in-Charge. Make of cement base paint : Snowcem plus (Snowcem paints)/ Duracem/ Aquacem/Shalimar/ Berger

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling/ facia complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc of any thickness and to make the surface even and smooth after preparing the surface smooth applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge. Make of wall care putty : JK wall putty/Birla Wall care putty/Bison wall putty. Note : (i) The contractor shall need to inform GE as well as Engineer-in-Charge for stage passing/ site inspection about the readiness of the existing surface treated with wall care putty under the subject item before applying further/final finishes .Please also note that the work of the further/final finish shall not be initiated until receipt of necessary approval from GE as well as Engineer In Charge. If any unsatisfactory finish detected, then the same shall be rectified by Contractor and cost of the same shall deemed to be included in the quoted rate. (ii) The lime( whitewash mix) shall be slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rubresistant.Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use.

Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty of any thickness where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth after preparing the surface smooth applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge. Make of wall care putty : JK wall putty/Birla Wall care putty/Bison wall putty. Note : The contractor must intimate to the GE as well as Engineer-in-Charge about the completion of initial preparedness of the old decorated ceiling surface treated with wall care putty before applying further finish for stage passing/ site inspection. Please note that the work of further finishes shall need to be initiated only after the receipt of necessary approval from GE as well as Engineer In Charge. If any unsatisfactory finish detected, then the same shall be rectified by Contractor and cost of the same shall deemed to be included in the quoted rate.

Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth after preparing the surface smooth applying one coat of cement base paint with highlighter of any approved shade @ 5 Sqm/kg/1 coat over & including a coat of exterior wall cement primer @10 Sqm/kg/1 coat (In case of second coat) as recommended for undercoat by manufacturer of cement base paint by using following brands of cement base paint and primer by brush or roller complete all as specified and as directed by Engineer In Charge. Make of cement base paint : Snowcem plus (Snowcem paints)/ Duracem/ Aquacem/Shalimar/ Berger Make of wall care putty : JK wall putty/Birla Wall care putty/Bison wall putty. Note : (i) The contractor shall need to inform GE as well as Engineer-in-Charge for stage passing/ site inspection about the readiness of the existing surface treated with wall care putty under the subject item before applying further/final finishes .Please also note that the work of the further/final finish shall not be initiated until receipt of necessary approval from GE as well as Engineer In Charge. If any unsatisfactory finish detected, then the same shall be rectified by Contractor and cost of the same shall deemed to be included in the quoted rate.

Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth after preparing the surface smooth applying one coat of oil bound distemper (washable) as approved tint/colour complete all as specified and as directed by Engineer-in-Charge. Make of wall care putty : JK wall putty/Birla Wall care putty/Bison wall putty. Note : (i) The contractor shall need to inform GE as well as Engineer-in-Charge for stage passing/ site inspection about the readiness of the existing surface treated with wall care putty under the subject item before applying further/final finishes .Please also note that the work of the further/final finish shall not be initiated until receipt of necessary approval from GE as well as Engineer In Charge. If any unsatisfactory finish detected, then the same shall be rectified by Contractor and cost of the same shall deemed to be included in the quoted rate.

Material and labour for complete removal of existing treatment (any numbers of layers of the existing treatment as directed by Engineer-in-Charge) from the walls/pillars/cornices by scraping down with using steel patti wire/ brush / sand papering or preparing the surfaces and after applying two coats of oil bound distemper (washable) over a coat of alkali resistance primer and wall care putty as per approved tint/colour by roller or roller brush complete all as specified and as directed by Engineer-in-Charge. Make of OBD: Asian paints/Berger paints/Nerolac NOTE : - At each stage i.e after complete removal and before applying OBD as specified above, the surface shall need to be passed in writing by the Engineer-in-charge.

M&L for preparation of old decorated surfaces of wood work exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make: Asian paints/Berger/Nerolac

M&L for preparation of old decorated steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make: Asian paints/Berger Paints /Nerolac

M&L for preparation of old decorated surfaces of wood work of any description not otherwise described also over 10 cm width of girth and applying one coat of varnish complete all as specified and as directed by Engineer-in-Charge. Make: Asian paints/Berger/Nerolac

Material and labour for preparation of old surfaces (plastered/unplastered) of walls/pillars /cornices by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc including applying white cement based putty where required for filling to depressions to make the surface even and smooth after preparing the surfaces applying one coat of weather proof exterior emulsion paint (weather coat Apex, 100% exterior grade), as per existing or as approved tint/colour complete all as specified and as directed by Engineer-in-Charge. Make of wall care putty : JK wall putty/Birla Wall care putty/Bison wall putty. Make Asian paints/Berger/Nerolac Note : (i) The contractor shall need to inform GE as well as Engineer-in-Charge for stage passing/ site inspection about the readiness of the existing surface treated with wall care putty under the subject item before applying further/final finishes .Please also note that the work of the further/final finish shall not be initiated until receipt of necessary approval from GE as well as Engineer In Charge. If any unsatisfactory finish detected, then the same shall be rectified by Contractor and cost of the same shall deemed to be included in the quoted rate.

Material and labour for preparation of old painted (plastered/unplastered/concrete) surfaces of any description over 10cm girth or width, not otherwise described of walls/pillars /cornices by removing / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering after preparing the surfaces applying two coats of plastic emulsion paint, interior emulsion including one coat of birla care putty (finishing smooth and glossy upto entire satisfaction of Engineer-in-charge) as per approved tint/colour with using paint brush/roller brush complete all as specified and as directed by Engineer-in-Charge. Make of wall care putty : JK wall putty/Birla Wall care putty/Bison wall putty. Note : (i) The contractor shall need to inform GE as well as Engineer-in-Charge for stage passing/ site inspection about the readiness of the existing surface treated with wall care putty under the subject item before applying further/final finishes .Please also note that the work of the further/final finish shall not be initiated until receipt of necessary approval from GE as well as Engineer In Charge. If any unsatisfactory finish detected, then the same shall be rectified by Contractor and cost of the same shall deemed to be included in the quoted rate.

Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth after preparing the surface smooth applying one coat of Oil Bound Distemper with paint brush complete all as specified and as directed by Engineer-in-Charge. Make of wall care putty : JK wall putty/Birla Wall care putty/Bison wall putty. Note : (i) The contractor shall need to inform GE as well as Engineer-in-Charge for stage passing/ site inspection about the readiness of the existing surface treated with wall care putty under the subject item before applying further/final finishes .Please also note that the work of the further/final finish shall not be initiated until receipt of necessary approval from GE as well as Engineer In Charge. If any unsatisfactory finish detected, then the same shall be rectified by Contractor and cost of the same shall deemed to be included in the quoted rate.

Demolition of stone slab of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms countersunk wash bashin tops etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe incl plastic seat and cover (As directed ) with SS or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Plastic water closet seat, any colour closed pattern with recessed bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed by Engr In Charge

S/F in repairs PVC over head tank cover for any capacity complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC low level cistern 10 Ltr cap PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pvc pipe of low or high density or PVC 32 mm dia for low level cistern.complete all as specified and directed by Engr In Charge.

S & F in repairs Chromium Plated health faucet including accessories complete all as specified and directed by Engr In Charge

S&F in repair Vitreous China Wash basin, white, flat back, size 550 x400mm excluding taps, chain and plug and porcelain stopper and fixing on existing brackets complete all as specified and directed by Engr In Charge.

S/F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends complete all as specified and as directed by Engineer-in-Charge.

S/F in repairs 125mm size brass chromium plated shower rose with swivel joints and shower arm complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low / high level flushing cistern complete all as specified and as directed by Engineer-in-Charge.

S& F for Brass three in one Chromium Plated wall mixer for mixing hot & cold water screwed down for iron pipe bore 15 mm and fixed complete all as specified and directed by Engr In Charge

S&F in repairs Internal components repair kit set (except PVC body) of PVC Flushing cistern 10 Ltr capacity incl ball valve etc complete (Flush Kit) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs toilet paper holder of brass, chromium plated fixed to walls with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs Stainless steel kitchen sink overall size 915 mm x 460mm bowel size 410mm x 330x 160mm with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including fixing camber brackets and connecting union to pipe complete all as specified and directed by Engr In Charge

S & F in repairs Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories, overall size 600mm x 750 mm complete all as specified and directed by Engr In Charge

S&F rotational moulded polythene water storge tank any colour, ISI marked, triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified of 500 litre capacity including dismantling old unserviceable water tank and unhoisting, removing from the site complete all as specified and directed by Engr In Charge

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 litre Capacity including dismantling old unserviceable water tank and unhoisting, removing from the site complete all as specified and directed by Engr In Charge

Taking up or down 15mm bore PVC tubing/GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr In Charge

All as per item 40 above but 20mm bore GI/PVC tubing complete all as specified and as directed by Engineer-in-Charge.

All as per item 40 above but 25mm bore GI/PVC tubing complete all as specified and as directed by Engineer-in-Charge.

S&F UPVC tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 25mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F UPVC tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 20mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F UPVC tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors 15mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr In Charge

Supply and fixed in repairs 15mm bore bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr In Charge Make:Jaquar / Marc/ Cera / Kohler

S&F in repair 15mm bore cast copper alloy chromium plated angle cock with long shank & cup concealed typecomplete all as specified and directed by Engr In Charge Make:Jaquar / Marc/ Cera / Kohler

Supply and fixed in repairs 15mm bore Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high pressure , screwed both ends for iron pipe or for unions complete all as specified and directed by Engr In Charge Make:Jaquar / Marc/ Cera / Kohler

Supply and fixed in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plqated, fancy type, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr In Charge Make:Jaquar / Marc/ Cera / Kohler

Supply and fixed in repairs 15 mm dia Bip tap standard PTMT any colour screwed for iron pipe (Min weight 90 gms) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixed in repair angular two way stop cock 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union fixed all as specified and directed by Engineer-in-Charge. Make:Jaquar / Marc/ Cera / Kohler

S&F in repairs Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms) complete all as specified and directed by Engr In Charge.

S&F in repairs Ball valves 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 25mm-455gms) complete all as specified and directed by Engr In Charge.

S&F in repairs brass, chromium plated soap dish fixed to walls with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 5-8mm thick acrylic corner shelf of 300mm radius with chromium plated grills and guide bars complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs chromium plated PVC health faucet with 1 mtr PVC tubing covered by CP coated rings complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Toilet cabinet mirror of size 450x300mm with all fittings and complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.

Dismantling cast iron pipes/PVC pipes of any dia and any description including all fittings complete all as specified and as directed by Engineer-in-Charge.

M & L for PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

M & L for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, fixed to walls,complete all as specified and as directed by Engineer-in-Charge.

M & L for PVC (SWR) bends 110 mm any radius,complete all as specified and as directed by Engineer-in-Charge.

M & L for PVC (SWR) bends 75mm any radius,complete all as specified and as directed by Engineer-in-Charge.

S&F PVC grating square or circular fitting of size 100 mm with hole etc complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each and removal from site, complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each and removal from site complete all as specified and as directed by Engineer-in-Charge.

Resecuring and easing & adjusting without taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including all fittings complete all as specified and as directed by Engineer-in-Charge.

S&F 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint incl tarring complete all as specified and as directed by Engineer-in-Charge.

S&F 2nd class hard wood plain framed factory made panelled shutter 35 mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers of ply wood commercial type complete all as specified and as directed by Engineer-in-Charge.

S&F 2nd class Hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.

S&F flush shutter 30mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge.

Taking down PVC chowkats/Frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading, and jointed together with solvent cement,supplying & fixing in the frame at site as per specification and drawing complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Stainless steel butt hinges 100 mm , medium weight, cold rolled complete all as specified and as directed by Engineer-in-Charge.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 100mm complete all as specified and as directed by Engineer-in-Charge.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm complete all as specified and as directed by Engineer-in-Charge.

S&F Mild Steel barrel tower bolts stove enamelled black with bright bolt, 200mm length complete all as specified and as directed by Engineer-in-Charge.

S&F Mild Steel sliding door bolt, plate type stove enemelled black with bright bolt not less than 12mm dia length of bolt 300 mm including a minimum of 6 bolts, nuts and washers complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 18/19mm thick plywood, grade, BWP, type BB fixed with screws to timber frame work including wooden beading/ fillets all-round etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 18/19 mm thick plywood, grade BWP, type BB fixed in cupboard shelves, partitions etc., including wooden beading/ fillets all-round etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair pre laminated particle board 18/19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in pelmet boxes complete all as specified and as directed by Engineer-in-Charge.

S&F 18/19 mmm thick colour solid PVC prelaminated board fixed to timber fram work as in cup board shutter/shelves, pelmet box and similar items fixd in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Auto closing hinges 35mm of 0 Crank (KH-001 or 8 Crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Ball bearing runners 45mm Telescopic (KTS-20) full extension load capacity 50 Kgs fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (storage basket) pull out type for large utensils size 480x500x150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (Cup and Saucers Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with (Plate Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with ( Cutlery Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with ( Grain Trolley Basket)) pull out type,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Chromium plated stainless steel wire basket (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils continer with ( Bottle Pull out Basket)) pull out type Two self,size 380x500x100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repair mortice lock of mild steel vertical type of size 150mm 6 Lever complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80KG complete all as specified and as directed by Engineer-in-Charge.

S&F continuous piano hinges mild steel bright finish or electrogavanised with flaps 30mm ( when open ) wide complete all as specified and as directed by Engineer-in-Charge.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engr In Charge.

S&F in repair 20/25mm dia stainless steel curtain rod with fixing with bracket stoper rollers etc as in repair.complete all as specified and directed by Engr In Charge.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pin/springs clips and providing and fixing new ones, complete all as specified and as directed by Engineer-in-Charge.

S&F sheet glass 4mm thick ordinary quality & glazing with oil putty in square n.exc 0.5 Sqm in each pane at any height and any story complete all as specified and as directed by Engineer-in-Charge.

S&F sheet glass 4mm thick frosted quality & glazing with oil putty in square exc 0.5 Sqm in each pane at any height and any story complete all as specified and as directed by Engineer-in-Charge.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with galvanised wire staples complete all as specified and as directed by Engineer-in-Charge.

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with galvanised wire staples complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr In Charge.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed by Engr In Charge.

S & F in repairs corner glass of 5.5 mm thick sheet glass with stainless steel brakets complete all as specified and as directed by Engineer-in-Charge.

S&F for Powder coated for aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer-in-Charge.

S&F for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed by Engineer-in-Charge.

S&F for Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed by Engineer-in-Charge.

S&F for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle complete all as specified and as directed by Engineer-in-Charge.

S&F in repair aluminium powder coated grills (pattern DG-104) weight of 2.00 to 3.20 Kg/Sqm for windows, ventilators, etc including jointing, cleats etc and fixed with medium screws into walls / frame work etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-Charge.

M&L 25mm thickness Plain cement concrete type B-1, 1:2:4 Nominal mix (using 20mm graded stone aggregate), with WPC as in levelling course of floors etc complete all as specified and as directed by Engineer-in-Charge.

M&L Non skid ceramic coloured tiles 6-7 mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

M & L glazed ceramic coloured tiles of size 300x450x7 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed by Engr In Charge

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors ,area of each tile exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and directed by Engr In Charge.

All as per item No 120 but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed by Engr In Charge.

M&L for vitrified ceramic coloured tiles light shade 10 mm thick (square / rectengular) polished area of each tile n exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1 :4 in floors etc complete all as specified and as directed by Engineer-in-Charge.

All as per item No 122 but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed by Engr In Charge

S&F safety pleated mesh fly screen door collapsilbe type/folding design (from sideways not from top) as mosquito proofing with security stainless steel screen mesh with sufficient surface area to fold and unfold, aircraft wheel to move smoothly with other fittings including locking arrangements (preferably double hook lock), 150mm UPVC handle and UPVC framework,complete all as specified & directed by Engineer–in- Charge.

Mahathi Constructionss (BID ID -3346382)

ragavbuilders (BID ID -3355501)

Delta Construtions (BID ID -3346435)