Providing and Fixing of Work Stations (cubicles and cabins) with storage units, electrical renovation work, cabling and switches for IT related works at Finance and Accounts division in Main building, CSIR-CFTRI, Mysuru

Providing and fixing panel based curvilenear work station with stoarge of size 1500mm x 750mm front desk; 1200mm x 600mm return desk and storage unit below sill level attached to the wall of size 2400mm x 450mm x 750mm Frames :- Supply and fixing of 50mm thick CRCA powder coated tile based system for main and return spine. All frames fastened together by means of nuts and bolts which will be line with top trims and end trims. Race way :- Supply and fixing of 0.80mm thick CRCA powder coated two layer raceway raceway. For electrical and networking separately below table top per work station. Raceways covers will be provided with appropriate electrical grommet cut outs as required Tiles:Top Fabric tile finish 8mm thick MDF covered Fabric of approved colour and one white board (600mm w) and soft board (600mm w) per work station. Bottom tile finish 9mm thick laminated tile of approved colour Table top: 25mm thick PLPB (Interior grade) with straight table and end table including straight edge bound hardworks and MS powder coated hook on brackets, L-brackets and table joint plate as required and directed by engineer in-charge.PLPB make: Century Prowud Storage: i).Providing and fixing File Storage Units (Size 2400 W x 450 D x 750 H ) Top Panel: 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade with PVC Edge Banding. Door Shutters: 18mm thick pre laminated partical Board Side Panels: 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. with PVC Edge Banding. Back Panels: 9 mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. with PVC Edge Banding. Shelf Panels: 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. with PVC Edge Banding. Hardware: High Quality Components for fitting the panels, handles and lock : Premium Lock with Wave Key Technology. Provision for adjustability of the Shelf Panel inside the Storage with Pin Support.PVC Edge Banding is done by machine pressed with hot melt glue. All fittings of Hafele/Hettich/Godrej. PLPB make: Century Prowud ii). The Pedestal Unit of Dimensions 400W x 470D x 675mm is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 2 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. The complete furniture unit is factory assembled with knock down fittings. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 3 drawers. All fittings of Hafele/Hettich/Godrej. PLPB make: Century Prowud Modular Box:12 way PVC modular box including plate & frame suitable for mounting 4Nos of 5/6A Switch & Sockets per work station, suitably fixed in the cubicles with required hardware etc., complete. Make: Please refer Special Electrical Conditions in Tender Documents.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) Make: JINDAL

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) Make: JINDAL

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (Plain) MAKE: SAINT GOBIAN OR MODI

Providing and fixing 9mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. MAKE: NOVAPAN

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Make: Godrej

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x10 mm

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Make: Godrej or its equivalent