Providing and fixing of light on Yuvrani Mahendra Kumari Smriti Van, Alwar.NIT16/2020-21/Item7

Amount

Supply and fixing of Decorative Pole of GI Pipe section of 3Mtr long with lower section 1Mtr long - 114mm outer dia, upper section 2Mtr long 60mm outer dia. The pole shall be provided with 340mm dia and 45mm bottom. The pole shall have oval shaped service window of size 130mm(w) x 300mm(h) comprising 4 way connection of 60Amp and 1 MCB of 6Amp. Diecasted Aluminium casting is provided at the joint of pole. Pole is painted with multiple coats of weather resistant polyurathane paint having minimum coating thickness 85 microns with approved color light foundation size is mm 450x450x600 bolt length in mm 450 sheet thickness 3mm. As per Drawing. (Make - HOMDECK, RADIAN, AD Poles, Glowmac) Supply and fixing of 40Watt LED Decprative Post Top Fixture(IP 65) made with corosion resistant die cast Aluminium, height of light fixture is 425mm with hat of dia 550mm with die cast based of die 60mm, rubber gaskets are provided at appropriate location for water resistant (IP65). Diffuser is made of unbreakable PC material.LED to be mounted on verticle square alumium exckusion top to bottom height on diffusre. Light fixture is painted with multiple coats of weather resistant Polyurethane paint. (Make - HOMDECK, RADIAN, AD Poles, Glowmac)

Providing & fixing recessed/surface mounting dust &vermin proof cubical meter pannel (of size length 1' x width/depth 1' x Height 1'-6") 16 SWG sheet, required hardware with powder coating of both side, hinged door with locking arrangement for equipment with stand of (3' height) MS angle (of size 50x50x6mm) with proper grouting by Cement concrete including all following accessories of group-1 with proper connection (by 4sqmm copper wire), Commissioning, testing, programming etc as required. (i)Single pole MCB (20-25Amp) =06Nos (ii) Isolator 415 V, 4pole, 40amp, IS-13947-4-1/ IEC 947-4-1 = 01 Nos (iii) Backlite sheet of minimum 4mm size as required for installation of accessories. (iv) Providing and fixing earth terminal with hardware and connecting earth wire/strip. (v) P&F 1nos hight voltage danger notice plate(100x80mm) on both side of aluminium sheet 20guage complete work should be done as per direction & entire satisfication of Engineer Incharge.