Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance NOT AVAILABLE | Admitted-Finance |
| 2 | Admitted-Finance BARASI HAZARIBAG | KODERMA | JHARKHAND | 825109 | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 4 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹86.1 L
EMD Value
₹1.7 L
Closing Date
20 Oct 2022, 5:00 pmClosed
Executive Engineer
Executive Engineer, R.D.Spl.Div., Hazaribag.
Renovation of Upgraded Middle School, Jihu Arar in Padma Block, District Hazaribagh
2022_RDSPL_62214_5
RDD/SD/HZB/11/2022-23
Open Tender
Civil Works
Percentage
274 days
Padma Block, District Hazaribagh
Please refer Tender documents.
3 documents required · 3 mandatory
₹10,000
Executive Engineer, R.D.Spl.Div., Hazaribag.
₹1.7 L
28 Nov 2022
15 Oct 2022
22 Oct 2022
15 Oct 2022
20 Oct 2022
15 Oct 2022
Amount
Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.(Assuming 10%)
Transportation Charge
Lifting of 5000 Litrs Capacity Tank up to 4.00m height with lifting tools with rope and labour
Making hole in Tank
Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.
Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler), 65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.
Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I. (As per Annexure II Attached)
Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job
Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate)
i) 1 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed.
Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I. (As per Model Estimate of Solar Energy based Mini WSS. TS done by SE, Ranchi Circle & Circle Gumla dt. 21.05.2019)
Provision of solar night lamp.
Cost of 50 x50 x6 mm M.S angle-8nos x 2.75=24.75 @ 4.5 Kg/m=99.18 kg
Add Extra Item for Supplying tools, labours and materials for painting, numbering and year for construction of T/Well and taking of colour photograph with two or three nearest persons including platform, drain, soak pit and also longitude & latitude, details of T/W such as total depth, casing depth, static water level, drawdown, discharge, strata chart, beneficiary population etc in separate sheet/format all complete as per direction of E/I.
supplying fiting and fixing 5 KVA automatic voltage stabilizer of sen & pandit or equivalent make to suit 3 HP submersible pump & to lift voltage from
Labour Cess @ 1%
Bidder Name
Amount
barasi infratech private limited(GSTN-NA)
AKHILESH PRASAD NAYAK(GSTN-NA)
AKHILESH PRASAD NAYAK
AKHILESH PRASAD NAYAK
stage.html
html • 0.10 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .