MP FUND 2022-2023

Amount

Design, supply, erection, testing and handing over of High Mast Structure Bajaj / philips make or equivalent with required number of continuously tapered hot dip galvanized steek oiktgibak sudes sections with telescopic strip joints to a total height of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the bse mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 nos. of flood light luminaries with control gear box complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anhor plates and templates including supply and fizing the following accessories in the Mast. a) Design and casting of suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 metre Width x 1 metre Length and 2 metre depth with necessary galvanized foundation bolts nuts and washers and dump plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site -1Set. b) High powered power tool complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V 50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch- 1Set. c) Feeder pilar box comprising 0.90m x 0.45m x 1.20m floor Angle iron frame with 63 A TPN main switch 1 no, 63 A fuse unit 3 nos. 63 A power contactor with automatic timer arrangements and reversing starter for the 3 phase motor - 1 set. d) Neon aviation obstruction light (Bajaj BJAOL(2) / equivalent) - 1 No. e) 2 Nos of special GI earth electrodes with copper plate 300 x 300 x 3mm and copper flat (1"x1/4) interconnection as per ISS complete with earth connection - 1 set. f) Hot dip galvanized lightenng arrestor - 1 No. g) Flood light luminaries of specially Heavy type water proof Dust proof integral luminaries fitting provided with 150 Watts LED Light fitting Crompton / Philips make or Equivalent with 150W LED Bulb with drives, Alglas coated reflectors, with cable connection etc: complete as per standard specification. - 8 nos(DATA-A)

V.S.T Agencies