Complete Renovation of ITDC Office at 4th, 5th and 6th Floors of Scope Complex, Core 8, Lodi Road, New Delhi

Amount

DISMANTLING

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Dismantling wooden boarding in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead: Thickness above 25 mm up to 40mm.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below

Shifting of Existing furniture such as tables , chair, Sofa ,storage racks and cabinets in each office room and complete including stacking of serviceable materials and removal of unserviceable materials at dumping yard within 50 m lead as per directions of Engineer-In -charge

CIVIL ITEMS

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. cement mortar 1:4 (1 cement : 4 coarse sand)

12mm Cement Plaster of mix 1:4 (1 Cement :4 Coarse Sand)

Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. Sqm

15 mm cement plaster on rough side of single or half brick wall of mix:1:4( 1 CEMENT 4 COARSE SAND)

Repairs & Patch work in Brick work with plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. with white cement mortar 1:4 (1 cement:4 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel Reinforcement for R.C.C. Work Including straightening, cutting, bending ,placing in position and binding all complete above plinth level. Thermo-Mechanically Treated Bars of grade FE-500D or more

Centering and shuttering including strutting, propping etc. removal of form for Suspended floors, roofs , landings , balconies and access platform

Providing and fixing 18 mm thick gang saw cut, mirror polished, pre moulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills, facia and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in-Charge. Granite work

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

FLOORING

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick & 75 mm high cement mortar 1 : 3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing & fixing of Engineered Wooden Flooring (3 ply/layered) consist of top layer of 2 mm natural wood and bottom layer (in 2ply) of Min. size 1200 mm (Length) x 150-300 mm (Width) x 14 mm (thickness) on floors including the cost of Beading, Profile, PVC Sheet, 8mm thick Underlay Foam etc in approved colour, texture and finish of approved make. The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets over prepared surface with wherever required all complete as per direction of the Engineer in-charge.

Providing & fixing in Engineered Wooden Skirting (3 ply/layered) consist of top layer of 2 mm natural wood and bottom layer (in 2ply) of Min. size 2400 mm (Length) x 100mm (Width) x 10 mm (thickness) in approved colour, texture and finish of approved make. The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expanded polyethylene foam sheets having 40kg/cum density over prepared surface with wherever required all complete as per direction of the Engineer in-charge.

Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08$ and conforming to IS: 15622, of approved make, in all colours and shades, Italian look, wooden look laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete size 800x800.

Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only, Laying of tiles will be done with the notch trowel, piller, wedge, clips of requires thickness, levelling system and rubber mallet for placing the tiles gently and easily glazed vitrified tiles matt/ antiskid finish of size 600x600

Providing and laying machine cut, mirror polished18mm thick, Italian Marble stone flooring laid in requires pattern in linear portion of the building all complete as per architectural drawings with 18 mm thick stone slab laid over 20mm (average)thick base of cement slurry @ 404 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.(Basic Rate 300/sq.ft.)

Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment up to 50mm, comprising of modular load bearing floor panels supported on G.I rectangular stinger frame work and G.I Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm * 100mm * 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mm*75mm*3.5mm welded with GI Check nuts screwed on the stud for level adjustment up to 50mm, locking and stabilizing the pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stingers system in all steel construction hot dipped galvanized of rectangular size 570*20*30*0.80 mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stinger assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer - in- charge. (c) Providing and fixing Access Floor panel of 6000*600*32 mm medium grade Filled Steel anti-static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyro grip non-combustible Portland cementitious core mixed with light weight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology up to 1 mm thickness for superior adhesion and Surface flatness within 0.75mm. The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm*25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in- charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm finished floor height.

PARTITIONS

Providing and fixing of wooden Partition 75 mm thick made out of 9 mm thick BWP ply from both side cladded with 1 mm thick decorative laminate, fixed on the frame of hard wood battens 50x50 mm fixed @ 2' at the intervals hinged in floor and wall including the cost of all necessary hardware like nail, screws, fasteners and adhesive etc. required horizontal & vertically to complete the same in all respect as per the direction of engineer in charge.

Providing and fixing of Wall lining made with 9mm BWP Ply fixed on the frame of 25x 25 mm hard wood section fixed on wall & columns and cladding with 1 mm thick laminate including cost of necessary hardware required like nail, screws, fasteners and adhesive etc. for completing the same in all respect as per the direction of Engineer -in-charge.

Providing and fixing 2nd class teak wood moulded beading 50x12mm with iron screws, plugs and priming coat on unexposed surface etc. complete

Providing and fixing 12mm thick toughened glass Partition of approved brand and manufacture fixed with D Shape SS Support with 2mm thick film of approved design and Make including preparation of surface, fixing of Glass in floor as well as roof, cleat of SS Grade (304)including cost of making necessary holes in roof and floor etc complete as per direction of Engineer -in charge.

CEILING

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false Ceiling tiles of approved texture in the grid including, required cutting/making, opening for Services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non-woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rock wool of 48 kg /cum backing.

Providing & fixing of Baffle Ceiling made out of Galvanized 0.50mm.The baffle blade shall be in size of 30x 100 x 3000mm in Wood grain/Grey finish 60 Micron –By Akzonobel powder coating . The baffle blade shall be suspended using Slotted U-profile at on-centre spacing in multiples of 125mm.Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. Installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using 0.95mm U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3000mm.1st U-Grid Channel must be no more than 40mm from the perimeter. Installation of Metal Baffles: Locate the slot for Baffle Hangers in slot of Baffle section at 1200mm centres. Hangers are inserted into the slot, then rotated 90° and fixed into position by tightening the grub screw. Baffle to be lifted into position and hangers engage over lip of U-Grid Channel. Each Hanger to be secured into position by inserting the Locking Clip. Baffles blades to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile. End Caps to be located by pushing the End Cap tongues into Baffle slots. Installation shall be according to as per the direction of Engineer In-Charge.

Provide and fixing false celling at height including providing and fixing a framework Made of Special Section power pressed from MS sheet And galvanized with zinc coating of 120gms /sqm (both sides inclusive )As per IS:277Of size 25MM white and consisting of angle cleat 25 mm widex2.6MM thick with flanges of 27 mm garden warfare and 37MM ,at 1200 MN centre to Centre ,one flanges fixed to the ceiling with dash fastener 12.5 mm diax50MM long with frame 6M Dia bolts ,other plenty of plate fixed to the angle hangers of 25 x10x.50mm of required length with nut and bolts of required size and other end of angle hanger fix with intermediate GI channel 45 into 15 into 0.9MM running at the spacing of 1200MM centre to Centre ,to which the ceiling 0.5 thick bottom wedge of 80mmWith Tap at Flingers of 26MM each having lips of 10.5MM ,at 4 MM centre to centre shall be fixed in a direction perpendicular to GI Intermediate Channel with connecting clips made out of 2.64 Dia into 230MM long GI wire at every junction ,including fixing 27 MM high having flanges of 20MM And 30MM long ,the perimeter of ceiling Fix to 2 ball wall/partition with the help of Raul plug at 4 LM centre to Centre ,with 25MM long drywall screws @230 MM interval including providing POP over rabbit wire mesh to ceiling section and perimeter channel with the help of drywall screws pop size 3.5 x 25MM at 230 mm C/C Including two coats of primer Call as per manufacturer specification and also including the cost of making openings for light fittings, grills, diffusers, cut-out, made with frame of perimeter channels suitably fixed ,all complete as per drawings ,specifications and direction of the Engineer in charge but excluding the cost of painting with : Plaster of Paris after fixing of rabbit mesh:10mm thick

DOORS WITH HANDLES & OTHER ACCESSORIES

Providing and fixing 12 mm thick toughened glass of approved brand and manufacture in frameless Single/Double leaf door shutter , including providing and fixing top & bottom pivot with top, bottom lock& double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge(Door handle, lock and stopper etc to be paid separately.

Providing and fixing of Stainless Steel (304 Grade )handles in matt Finish for glass door with necessary fixing arrangement screw etc of approved quality of size 25 mmx325 mm (H-Type).

Providing & fixing of lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutter as per direction of Engineer-in charge. (Over all area of door shutter to be measured).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing chromium plated brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete as per direction of Engineer -in-charge

Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

PAINTING & POLISHING

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture to give.

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50gm/litre and UV resistance as per IS 15489:2004 , Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10 sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work

Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

French spirit polishing : Two or more coats on new works including a coat of wood filler

Melamine polishing on wood work (one or more coat).

SUB-HEAD-I: CIRCUIT POINT WIRING

Wiring for light point/ fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group-A (Primary point )

Group-B (Primary point )

Group-C (Primary point )

Wiring for group controlled (looped) light point /fan point / exhaust fan point/call bell point (without independent switch etc) with 1.5 sqmm FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc.as required.

Group-A (looping point )

Group-B (Primary point )

Group-C (Primary point )

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire For Light Extra Loop.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire For Light Circuit Point

2 X 4 sq. mm + 1 X 4 sq. mm earth wire For Power Circuit Point

4 X 10 sq. mm + 2 X 6 sq. mm earth wire For Submain Wire / Cable of DB

SUB-HEAD-II:- CABLE TRAYS AND ACESSERIES

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted M.S. cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays reducer with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

SUB-HEAD-III:- DISTRIBUTION BOARDS

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 KA “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole (6/32 Amps)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

Supplying and fixing Single Pole Blanking Plate in the existing MCB DB complete etc. as required.

SUB-HEAD -IV :- CONDUITING WIRING AND CABLING FOR TELEPHONE / TV NETWORK SYSTEM

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, fixing, connecting and testing of Telephone/computer/TV modular sockets modular plate anodised MS box and blanking Plate in surface/recessed including connection etc as required.

RJ-11 telephone socket two line with shutter

T.V. CO-axial cable socket outlets of one point

RJ-45 face plate( computer line) with shutter DN-460

Providing, fixing connecting and testing of solder less telephone Tag block of following capacity ties as required in suitable size of m.s. hinged lockable cover box duly painted etc. as required of Krone type. 50 pair Tele Tag Blk

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/recessed steel/PVC conduit as required 2 pair Telephone cable. (0.61sq mm)

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 75 mm x 75 mm x 60 mm deep

Supply ,fixing , testing and commissioning of Yealink Sip T31P, Poe Supported Dual Line Entry Level IP Phone. all accessories as required.

Supply ,fixing , testing and commissioning of Beetel F2N+ FWP Fixed landline Phone,Wireless with LCD Display, Quad Band,Dual Sim,Voice Recording,Auto Answering, Mp3 Player,3.5mm Jack,Alarm,Basic Calc,TNC Antenna,Screen Auto Lock(F2N+Black) . all accessories as required.

SUB-HEAD-V LIGHTS ITEMS

Supply, fitting, wiring, testing and commissioning of Strapline-S 50mm - LSL-S 5030 - 30W/4feet 240Vac, CCT - 4000K, 82Im/W, CRI>80 Beam Angle - 110°, D - L-600 X W-53mm, H - 80mm, Body material - Extruded Aluminium, Black Finish IP20 all accessories as required.

Supply ,fixing , testing and commissioning of Lego Spot -LRS 8908 - 8W 240Vac, CCT - 4000K ,640lm, CRI>80 Beam Angle - 50°, D - Ø86mm, H - 90mm,Cutout-80mm , Body material - Die Cast aluminium, Black Finish IP20 all accessories as required.

Supply ,fixing , testing and commissioning of Terra 2X2 - LTP 1036 - 36W 240Vac, CCT - 4000K 3780lm, CRI>80 Beam Angle - 110°, D - L-595 X W-595mm, H - 34mm, Cut Out Area - L-575 X W-575mm, Body material - CRCA, BLack Finish IP20 all accessories as required.

Supply ,fixing , testing and commissioning of WALL FAN Model Name Rapid Ultra High Speed with Auto Swing/Oscillation Brand Color White Green Number of Blades 3 Pack of 1 Power Requirement 210-130 Power Consumption 55 W Blade Material Plastic Operational Current 50 A Net Quantity 1. all accessories as required.

SUB-HEAD-VI:-PUBLIC ADDRESS SYSTEM

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 500 Watt operating at 240 Volt AC Supply complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Single pair, 2-core, 1.5 sqmm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

SUB HEAD -VII: FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying & laying of 2 x 1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

SUB HEAD -VIII: FIRE FIGHTING ITEMS - INTERNAL HYDRANT, PIPING & ACCESSORIES

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m

Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire, rivets etc. confirming to IS 636 (type-A)as required. Gun Metal

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required Gun metal

Supply & Fixing of Fire Man's Axe with heavy Insulated rubber tested up to 20 KV and confirming to IS ;926 as required.

Providing & fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg) range, 3 / 8" BSP bottom entry on Pump Delivery Line complete with Ball valve

Providing and fixing M.S. fire hose door (Including door frame and all civil work and finishing) of size 900mm High x 600mm Wide x 900 mm Deep approx.Fabricated from 16 gauge M.S sheet.Provision for hole fasteners on both sides with double door & frame with 2 nos locking arrangement with 2 nos tower bolts and Glazed with 4mm thick Float clear glass (glass panel to be fix in door panel - 700 mm from the bottom of the door and 100 mm from the top /sides of door panel) suitably marked on the outside with the letters "FIRE HOSE".all M.S. work to be stove in Enamled Fire Red Colour over appropriate primer (Front side P.O. Red Paint & inside white paint two coat).The width & height to depend upon the actual size of the fire shaft available.Contractor to make shop drawings and get it approved by Enginner -in-charge/Consultant before fabrication.(Cost shall be inclusive of providing break glass box containing key for the door)

Providing and fixing inspection & testing assembly/drain assembly consist of following :- i) 25 mm dia Inspection Test Valve (Ball Valve) & Piping ii) Sight Glass iii) Union iv) 50 mm dia ball valve for drain with piping The arrangment shall be complete as per drawing and as per NBC provisions. The item will include all works from the sprikler header to the drain pipe.

FIRE EXTINGUISHERS Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to ID:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 4.5 Kg.

Providing and fixing of ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to ID:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 4.0 Kg.

SPRINKLER SYSTEM & PIPING Providing laying, testing and commissioning of class 'C' heavy duty MS pipe confirming to IS 3589/1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting two or more coat synthetic enamel paint of require shade complete as directed by Engineer-in-charge.

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

SUB HEAD-IX HVAC ITEMS DUCTING, GRILLS, DIFFUSER AND INSULATION

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63 mm sheet

Thickness 0.80 mm sheet

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

DUCT LINE THERMAL INSULATION 'Supply and Application of 9 mm thick nitrile rubber insulation of Density of the nitrile rubber shall be 40-60 Kg/m3. The product shall have temperature range of –40 oC to 105oC. The insulation material shall be fire rated for Class O as per BS 476 Part 6 : 1989 for fire propagation test and for Class 1 as per BS 476 Part 7, 1987 for surface spread of flame test. Water vapour permeability shall be not less than 0.024 per inch (2.48 x 10-14 Kg/m.s.Pa i.e. µ>7000: Water vapour diffusion resistance).

13 mm thick

9 mm thick

Supply,installation,testing and commissioning of following HI WALL SPLIT UNIT 1.5 Ton, 5 star rating of BEE air cooled split type air conditoiners complete with indoor unit, outdoor unit including remote & copper refrigerant piping with insulation (EP fome pipe section upto 3 meter and power cable upto 4 meter, R-410 refrigerant with outdoor stand as require at site.

Supply,installation,testing and commissioning of following HI WALL SPLIT UNIT 2 Ton, 5 star rating of BEE air cooled split type air conditoiners complete with indoor unit, outdoor unit including remote & copper refrigerant piping with insulation (EP fome pipe section upto 3 meter and power cable upto 4 meter, R-410 refrigerant with outdoor stand as require at site.

COPPER REFRIGERANT PIPING Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation / with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required. 19. mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

DRAIN PIPING OF INDOOR UNITS : Supplying, laying, fixing, testing & commissioning of composite uPVC pipes of following nominal size having rating not less than 10kg/cm2 complete with 6 mm thick nitrile rubber insulation & all necessary fittings such as elbows, tees, reducers U-trap, supports, clamps etc. as per specification & drawings. 20 mm dia with 6 mm thick

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 1.5 sqmm + 1 X 1.5 Sqmm earthwire

SUB HEAD-X DISMANTLING

Dismantling all old smoke detectors, fire panels, hooters, manual call points and other fire protection equipments including wiring conduits (15 mm to 40 mm dia) of fire detection & fire alarm system, PA system complete with cutting and shifting to scrap yard as specified, as per the direction of Engg-In-Charge.

Dismantling all old electrical wiring including conduit (20 mm to 40 mm dia), switch plates GI boxes and tube lights, ceilling light fittings and other electrical accessories with cutting and shifiting to scrap yard as specified, as per the direction of Engineering - in - charge.

Dismantiling of GSS sheet metal rectangular / round ducts of all sizes including all connections accessories with cutting and shifting to scrap yard as specified as per direction of Engineering - In - Charge

DECENT FURNISHERS AND DECORATORS

Rzone Buildtech Private Limited

M/s MODERN CONCEPT CONSTRUCTIONS

SHARDA INFRA ENGINEERS PVT LTD

s. K. Industries

Vastu Sadan and Associates

MSR ASSOCIATES

G-Tech Construction and Fabricators