Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-Finance | ₹5.5 L | L1 | Accepted-Finance Lowest bidder |
| 2 | L2₹6.2 LRejected-Finance | ₹6.2 L | L2 | Rejected-Finance other then lowest bidder |
| Sl No | Description | Qty | Unit | Kamlesh L1 | Vijay Sharma Contractor L2 |
|---|---|---|---|---|---|
| 1.00 | Transportation of suitable truck mounted DTH & ODEX / Percussion Calyx/ RC drilling rigs alongwith necessary accessories etc. to the site of work and errection of rig including levelling etc. complete in all respects as per direction of Engineer Incharge. | 1 | Each | 5,500 ₹5,500 | 8,000 ₹8,000 |
| 2.00 | Drilling bores of 152mm dia, as per IS: 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata conglomerate, boulder, pebbles, gravats, silt, clay etc. including attachments consumable store, bits, water, POL etc. complete with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia Advani Oertikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of biodegradable and non-toxic foam flush etc. complete in all respect as per directions of Engineer Incharge MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. | 100 | Per Rmt. | 2,600 ₹2.6 L | 2,800 ₹2.8 L |
| 3.00 | Supplying and lowering of IS marked 125mm NB 5.00mm thick fincut MSERW casing pipes as per IS-4279-2001 and requirement of ODEX attachement from approved manufactures complete in all respect. | 90 | Per Rmt | 2,390 ₹2.2 L | 2,650 ₹2.4 L |
| 4.00 | Providng and fixing suitable casing shoe and bit tube as perrequirement of ODEX attachement complete in all respects as per direction of Engineer Incharge. | 1 | Each | 6,000 ₹6,000 | 12,000 ₹12,000 |
| 5.00 | Collelction and prpeservation of soil samples in polythene bags complete in all respects as per direction of Engineer Incharge. | 1 | Each | 34 ₹34 | 40 ₹40 |
| 6.00 | Development of borewell and yield testing with aire compressor through V nootch and disinfection etc. complete in all respect as per direction of Engineer Incharge. | 1 | Per/Hour | 5,000 ₹5,000 | 5,200 ₹5,200 |
| 7.00Supplying and lowering of Is marked riser pipes, medium class screwed and socketed and welded as per IS-1239 (Part-I)1990 with uptodate amendments, electric resistance welded including cost of all cuttings, threadings and weldidng wherever required, in randum lengths of 3 mtrs inclusisve of transportation charges to the site complete in all respects as per direction of Engineer Incharge. The seamless sockets shall be provided as per IS 13056-1991 (Read Note No. 3&4) | |||||
| 8.00 | 32mm dia GMS pipe.(M) | 89 | Per Rmt | 400 ₹35,600 | 500 ₹44,500 |
| 9.00 | Supplying and errection of IS marked India Mark-II extra deepwell hand pumps (32mm) confirming to IS 9301 consisting of pump head assembly, cylinder assembly and seven connecting rods complete in all respects for installation beyond 60m as per direction of Engineer Incharge. | 1 | Each | 15,000 ₹15,000 | 16,500 ₹16,500 |
| 10.00 | Providing and fixing of extra connecting rods up to 3 mtr. Length in hand pumps as per site conditions complete in all respects as per direction of Engineer Incharge. | 23 | Per Sqm | 450 ₹10,350 | 525 ₹12,075 |
Tender Value
Refer Docs
EMD Value
₹9,000
Closing Date
30 May 2025, 5:00 pmClosed
EE JSD POOH
EE JSD POOH
Installation of India Mark II Hand Pump near bus stand at village Sumra
2025_HPIPH_105800_1
KNR-EE-JSD-POOH-T-2025-725-825
Open Tender
Civil Works
EE JSD POOH
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
Yes
EE pooh
₹9,000
Yes
EE JSD POOH
4 Apr 2026
21 May 2025
2 Jun 2025
21 May 2025
30 May 2025
21 May 2025
22 May 2025
Amount
Transportation of suitable truck mounted DTH & ODEX / Percussion Calyx/ RC drilling rigs alongwith necessary accessories etc. to the site of work and errection of rig including levelling etc. complete in all respects as per direction of Engineer Incharge.
Drilling bores of 152mm dia, as per IS: 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata conglomerate, boulder, pebbles, gravats, silt, clay etc. including attachments consumable store, bits, water, POL etc. complete with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia Advani Oertikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of biodegradable and non-toxic foam flush etc. complete in all respect as per directions of Engineer Incharge MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately.
Supplying and lowering of IS marked 125mm NB 5.00mm thick fincut MSERW casing pipes as per IS-4279-2001 and requirement of ODEX attachement from approved manufactures complete in all respect.
Providng and fixing suitable casing shoe and bit tube as perrequirement of ODEX attachement complete in all respects as per direction of Engineer Incharge.
Collelction and prpeservation of soil samples in polythene bags complete in all respects as per direction of Engineer Incharge.
Development of borewell and yield testing with aire compressor through V nootch and disinfection etc. complete in all respect as per direction of Engineer Incharge.
Supplying and lowering of Is marked riser pipes, medium class screwed and socketed and welded as per IS-1239 (Part-I)1990 with uptodate amendments, electric resistance welded including cost of all cuttings, threadings and weldidng wherever required, in randum lengths of 3 mtrs inclusisve of transportation charges to the site complete in all respects as per direction of Engineer Incharge. The seamless sockets shall be provided as per IS 13056-1991 (Read Note No. 3&4)
32mm dia GMS pipe.(M)
Supplying and errection of IS marked India Mark-II extra deepwell hand pumps (32mm) confirming to IS 9301 consisting of pump head assembly, cylinder assembly and seven connecting rods complete in all respects for installation beyond 60m as per direction of Engineer Incharge.
Providing and fixing of extra connecting rods up to 3 mtr. Length in hand pumps as per site conditions complete in all respects as per direction of Engineer Incharge.
Vijay Sharma Contractor (BID ID -520401)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.78 MB
Tendernotice_2.pdf
PDF • 2.29 MB
Tendernotice_3.pdf
PDF • 0.99 MB
Tendernotice_4.pdf
PDF • 0.24 MB
BOQ_155006.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid