Open Tender Notice for Annual Maintenance of Ramesvara Temple, Bhubaneswar for 2023-24

Amount

Annual Maintenance of Ramesvara Temple, Bhubaneswar

Item No.2: Removing dry or oil bound distemper, synthetic enamel paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. in MS grill of the boundary wall of Ramesvar Temple, Bhubaneswar.

Item No. 3 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Item No. 4: Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil

Item No. 5 : Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Item No. 6: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Item No. 7: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Item No. 8: Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment at drinking water platform

Item No. 9: Providing and fixing of rectangular FRP Portable Cabin Size : 4'-0'' X 4'-0'' X 8'-0'') for installation of water purifier mechine for Public Drinking water kiosk including water storage Tank in overhead and electrical wiring as per requirment for drinking water at Ramesvara Temple, Bhubaneswar.

Item No. 10: SITC of Water Cooler-cum-Purifier towards providing pure drinking water to the tourists. (Water storage capacity - 80L, Water cooling capacity - 60L PH, Water cooling capacity with 10 degree C temp. drop - 65LPH, No. of faucet - 02 (1cold & 1normal, Other detail technical specifications enclosed).

Item No.18: Provision for repairing and renovating including necessary plumbing and electrical work in the existing toilet block at monument compound and making it serviceable for the visitors

Item No. 18.1: Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Item No. 18.2: Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

Item No. 18.3: Fixing and fittings for WPC door such as SS butt hinges and necessary S.S screws, MS tower bolt 150x10 mm, MS sliding door bolt 250x16 mm, Door Handle etc.

Item No. 18.4: Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Item No. 18.5: Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Item No. 18.6: Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

Item No. 18.7: Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Item No. 18.8: Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Item No. 18.9: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Item No. 18.9.1: 15 mm nominal dia Pipes.

Item No. 18.9.2: 32 mm nominal dia pipes

Item No. 18.10: Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Item No. 18.11: Providing and fixing necessary fittings such as Tank nipple, 3/4" GI Shortpiece,3/4" Socket, 3/4" brass valve,1.5"/0.75" Reducing socket, 1.5" CPVC brass MTA, 1.5" brass valve etc for connection for water supply pipe and water storage tank including labour charges etc complete.

Item No. 18.12: Providing and fixing necessary fittings such as Tank nipple, 3/4" GI Shortpiece,3/4" Socket, 3/4" brass valve,1.5"/0.75" Reducing socket, 1.5" CPVC brass MTA, 1.5" brass valve etc for connection for water supply pipe and water storage tank including labour charges etc complete.

Item No. 18.13: Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length

Item No. 18.14: Providing and fixing CP brass 2 Way Bib Cock with Wall Flange 15 mm nominal bore

Item No. 18.15: Providing and fixing Health Faucet (ABS body) of approved quality.

Item No. 18.16: Providing & Fixing Necessary fittings like Mirror of suitable size ,Towel ring , Liquid container , Soap Container, Holder for hand shower, toilet paper holder , hooks, holder etc as per requirement for bathroom including all charges complete as per direction .

Item No. 18.17: Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality, 15 mm nominal bore

Item No. 18.18: Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Counter top basin (530x440x200) mm, Shape: Oval)

Item No. 18.19: Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Item No. 18.20: Providing and fixing CP brass Waste Coupling (32 mm) and flexible PVC waste pipe (32 mm) including P.V.C. waste fittings for wash basin and sink, of approved quality and colour

Item No. 18.21: Providing and fixing CP brass pillar cock of approved quality, 15 mm nominal bore.

Item No. 18.22: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 415x335x325 mm sizes including flush pipe with all fittings ,including cutting & making good the walls.

Item No. 18.23: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for wash basin platforms of required size, approved shade, colour and texture, edges fixed into the wall after cutting groove with cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish and dismantling the existing damaged slabs etc. complete at all levels with Granite stone slab of colour black in double layer, (Area of slab upto 0.50 sqm)

Item No. 18.24: Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Item No. 18.25: Supplying and spreading moorum soil uniformly of 0.6 m for 2.5 m wide approach pathway to the toilet including charges of labour etc complete.

Item No. 18.26: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Item No. 18.27: 12 mm cement plaster finished with a floating coat of neat cement of 1:3 (1 cement: 4 fine sand)

Item No. 18.28: Excavating trenches by mechanical/manual means of required for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc, not exceeding 80 mm dia.

Item No. 18.29: Supplying and fixing adequate size of heavy duty HDPE pipe having working pressure 2.5Kg/Sqcm at a depth of 30 cm below the ground in the existing trenches including refilling the trenches etc complete as required.

Item No. 18.30: Supplying and laying of one PVC insulated & PVC sheathed 2 core 6 sqmm copper armoured power cable in existing DWC/HDPE pipe etc as required.

Item No. 18.31: Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way, Double door

Item No. 18.32: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Item No. 18.32.1: Single pole

tem No. 18.32.2: Double pole

Item No. 18.33: Supply, installation, testing and commissioning of LED Tube Fittings with batten (separatly), system wattage not less than 10/12 W along with all accessories, connection and to be fitted on wall/ down rod/ chain etc complete as required.

Item No. 18.34: Supplying & fixing of 300 mm Exhaust fan along with all accessories including connection, testing commissioning etc complete as required.

Item No. 18.35: Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Item No. 18.36: Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.

Item No. 18.36.1: 3 Modular

Item No. 18.36.2: 8 Moduler

Item No. 18.37: Supplying and fixing of following sizes of medium class PVC conduit/PVC Casing along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Item No. 18.38: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Item No. 18.38.1: 1 0 A switch

Item No. 18.38.2: 10 A socket

Item No. 18.39: Supply, installation, testing and commissioning of LED bulb fittings with batten holder (separatly), system wattage not less than 9/10 W along with all accessories, connection and to be fitted on wall etc complete as required.

Item No. 18:.40 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Item No. 18.40.1: 2 X 1.5 Sqmm

Item No. 18.40.2 : 3 X 1.5 Sqmm.

Item No. 20: Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Item No. 22: Providing and fixing stainless steel ( Grade 304) structure as per approved design for PNB/Direction Board/Visitors Information board, made of Hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same in a pit (0.3X0.3X0.4) m with necessary earth work and cement concrete (1:2:4). Write up of the PNB should be trilingual (Odia, Hindi and English) as per approved matter and etching in nature on the 18 gauge SS sheet (3'X2') including dismantling the old PNB wherever required and carriage to the office with suitable arrangement etc all complete as per approval of Engineer-incharge. at Ramesvara Temple.

Item No. 23: physically cleaning the water body at Ramesvara Temple, removing vegetations growth, hyacinth etc. from the water surface including removal of rubbish up to a lead of 50 m outside the periphery of the area cleared

UTKAL ENTERPRISERS

SHASANK SEKHAR NAYAK