Const of Shed Work at Heera Lal Barahsaini Inter College Aligarh

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: E.E RURAL ENGINEERING DEPARTMENT, DIVISION ALIGARH

Name of Work: ghjkyky okjg lSuh b.Vj dkWyst esa 'ksM fuekZ.k dk;Z

Contract No: 798/ RED/Tender/ Bond Clerk/2025-26 dated- 24 09 2025

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Descriptiond Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 8000 m as per Technical Specification Clause 301.5 187.56 CuM 375.25 Excess(+) Full Conversion INR 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

2 Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheeled roller to achieve the desired density, complete as per clause 401. 40.58 CuM 3040 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

3 Providing and Laying of I-Shaped Precast Interlocking Tiles Concrete Block Pavements having thickness 80 mm(Coloured) compressive strength not less than 30Mpa and weight 4.50Kg including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work as per drawings and Technical Specification Clause 1504. 324.63 SqM 959.5 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

4 Earth Work in excavation by mechanical means (Hydraulic Excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out excavated soil and disposal of surplus excavated soils are directed,within a lead of 50m.as per D.S.R.Item No.2.8.1 -All kinds of soil. 4.05 CuM 192.46 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per D.S.R.Item No.4.1.8 0.68 CuM 5036.53 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6 Providing and Laying in position Reinforced cement concrete work with 1:1.5:3 (1 cement:1.5 coarse sand zone-III derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level: as per D.S.R.Item No.5.1.2 1.87 CuM 6688.09 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

7 Centering and shuttering including strutting, propping etc. and removal of form for Foundation,footing,bases of column etc. for mass concrete as per D.S.R.Item No.5.9.1 21.12 SqM 289.94 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

8 Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in Thermo-Mechanically Treated bars of grade Fe-500D or more. As per SI. No.- 5.22B.1 300 Kg 73.68 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

9 Steel Work in built up tubuler (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a primer coat of approved steel primer including welding and bolted with special shaped washers etc. complete as per New DSR Sp. No. 10.16.1 5000 Kg 143.74 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10 Providing corrugated G.S.sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks,boltsnand nuts 8 mm diameter with bitumen and G.I.Limpet washers or with G.I. Limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surface), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. as per D.S.R.Item No. 12.1.1:1.00 mm thick with zink coating not less than 275 gm/sqm 424 SqM 1077.36 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

11 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. Limpet and bitumen washers complete as per D.S.R. Item No. 12.4.1: 0.80 mm thick with zink coating not less than 275 gm/sqm 8 Rm 800.95 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

12 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheets, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC:67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of the Engineer-in-charge, (Structural frame work including M.S.plate to be provided seperately. Rectangular area of the sheet only shall be measured for payment) as per D.S.R. Item No. 16.60.1 Overhead Informatory road signage 45 SqM 4347.37 Excess(+) Full Conversion INR

13 Providing and Laying Polished Granite stone slab of colour Black,Cherry/Ruby Red or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by Engineer-in-charge. as per D.S.R.Item No.11.56.1 45.6 SqM 3313.31 Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words