Special repair to Bldg No SL-117 at Mil station Mount Abut under AGE(I) Udaipur

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and jointed in any mortar

Material and labour for 25mm thick PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate below flooring as a levelling course in floor.

M&L for machine cut kota stone slab flooring 20 -25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to march the shade of the slab including rubbing and mirror polishing with over and including 15 mm thick screed bed in CM 1:6 for floor finishes complete all as specified and directed

Material and labour for 20mm thick machine cut kota stone slab in skirting risers of steps and pillar of size not less than 300X150 mm over and including screed plaster 10mm thick in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing complete all as specified and directed by Engr-in-charge

M&L for Machine cut cudappah stone slab over coocking platform 20-25mm thick over cement screed base,including screed plaster 10mm thick in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete polishing complete all as specified and directed by Engr-in-charge.

M&L for virtified Ceramic tiles light shade 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, ,over and including 15mm thick screed bed in cement mortar(1:6) complete.

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding0.11 sqm but not exceeding 0.18 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles,over and including 15mm thick screed bed in cement mortar(1:6) complete.

Material and labour for glazed ceramic coloured tiles of size 300mmx450mmx7mm thick on vertical surfaces such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) complete.

Material and labour for 75mm thick PCC(1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base

S&F chequered tiles bullnosed 32cm x 20cm x 30mm thick, (glossy finish) set jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including cement mortar screed bed 15mm thick in cement morter 1:6.

Taking down cement plaster of any description and Material and labour for 10mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling,finished even and smooth without using extra cement.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash.

Taking down cement mortar plaster/ terrazzo plaster of any description on wall including racking out joints,hacking for key,scrubbing down with water etc complete as directed

Material and labour for 10 mm thick rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement.

Material and labour for 15 mm thick rendering in cement mortar (1:4) using water proofing compound @ 2 % by weight of cement in finish coat on other than fair faces of brick wall surfaces, finished even and smooth without using extra cement complete. Note:- water proofing compound shall be measured and paid separately.

Supply only water proofing compound,ISI marked.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of weather coat paint over a coat of priming paint etc all as specified & directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emultion distember over a coat of wall putty as priming coat & smooth surface etc all as specified & directed. .

Material and labour for completely removal of existing treatment on surface of walls and applying of two coats of oil emulsion distember over a coat of wall putty as priming coat and smooth surfaces etc all as specified & directed.

Material and labour for completely removal of existing treatment on surfaces of wall completely and applying two coats of weather coat paint over a coat of primer/putty etc all as specified & directed.

Material and labour for preparation of old surfaces of ceiling and applying two coats of white wash.

Taking down shutter (Window/Venti) from the frame,any description area n-exceeding 1.0 sqm each including removing from site.

Taking down shutter (Mosquoto shutter) from the frame,any description area exc 1.0 m but n-exceeding 2.0 sqm each including removing from site.

Taking down wooden frame with shutter without taken off shutter from the frame, area n. exceeding 1.5 sqm each including removing from site.

Taking down wooden frame with shutter without taken off shutter from the frame,area exceeding 1.5 sqm but not exceeding 4 sqm each including removing from site

Taking down shutters of any description area exceeding 1 sqm but not exceeding 2 sqm each and re-fixing with same opening after repaired as directed.

Resecuring without taking down shutter from the frame, area n. exceeding 1.5 sqm each including removing from site.

Resecuring without taking down shutter from the frame, area exc 1.5 sqm but n. exceeding 4 sqm each including removing from site.

Supply and fixing of M.S angle Iron door frame conforming to Fe.290.Gde-E-165

Supply and fixing of 35 mm thick,factory made,gauged and skeleton shutters from 1st class hard wood (Hollock), open rebated,prepared to receive glass,gauge etc(without sash bar),edges of framing plain,chamfered or rounded,fitted with cut & mitred beads for securing glass,gauge etc,size of members of shutters as specified in SSR-2009 Part-I,members kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

Supply and fixing of plain framed panelled factory made shutter(any number of panels) 35mm thick of 2nd class hard wood (Hollock) (botonical name terminalia myrio carpa) for rails and styles kiln seasoned(as per IS-1141) & chemically treated as per IS- 401 and panels of 9mm thick BWP marine grade plywood bounded with high quality liquid phenol,formaldehyde commercial both face,(the over all door shutter shall conform to IS--1003)(Part-I) and complete all as specified.

S&F 3mm thick sheet of glass ordinary quality and glazing with oil putty in square n.exc. 0.5 Sqm in each pane.

Material and labour for prepaparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of pink primer complete all as specified.

Material and labour for prepaparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade complete all as specified.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, galvanised wire, screws fixed to aluminium grills or wooden frames etc complete.

Supply and fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, galvanised wire, screws fixed to aluminium grills or wooden frames etc complete.

Hacking out old broken glass panes any thickness,size,quality or description from wooden frames glazed with beads and Supply and fixing new pane 3mm thick ordinary quality glass glazing with oil putty or with woodenbeading in square not exceeding 0.5 Sqm each panel complete.

Supply and fixing of MS butt hinges, medium weight,cold rolled of size 100 mm.

Supply and fixing butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100mm size fixed to PVC frames complete

S&F aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy.

S&F Aluminum anodized barrel tower bolt of extruded section 200mm long

S&F 150mm size aluminum handles, cast type anodised.

S&F Aluminum anodized handle cast type 100mm long

Supply and fixing of MS double action spring hinges of size 125mm,type with steel wire spring,stove enamelled black

Taking out unserviceable double action spring hinge from door shutter and supply and fixing of new MS double action spring hinge,125mm size with steel wire spring ,stove enamelled black fixed to metal door frame by welding complete as directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint of any tint over a coat of red oxide zinc chrome primer complete.

Demolition of cement concrete of any description and in any position not otherwise specifically provided

M&L for 50mm thick PCC(1:3:6) type C-1(using 20mm graded stone aggregate) laid in alternative bays as in plinth protection including finished the surface even & fair without using extra cement & filling the joints with mastic filling i.e one part of bitumen 85/25 & 3 parts of sand by weight.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc,but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘ B’ Bricks straight or curved on plan exec 6 mtr mean radius with in CM 1: 6

Demolition of RCC (reinforcement cut as required to facilitate demolition) complete as directed.

Material and labour for RCC(1:1.5:3) type A1, using 12.50 mm graded stone aggregate in chajjas, lintels, roof ceiling, drops etc.

Material and labour for RCC(1:1.5:3) type A1 using 12.5 mm graded stone aggregate in slab supported on wall,decks slab etc.

Material and labour for mild steel TMT bar 8 mm dia cut to length, bent to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete.

Material and labour for mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Formwork to chullah hoods, chajjas, lintel, troughs and similar items including edges

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing.

Supply and fixing of factory made solid panel PVC door shutter 30 mm thick(style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the styles &rails with suitable PVC sheet beading and joined together with solvent cement.fixed in the frame at site all as specified and directed.

Material and labour for 18/ 19 mm thick Prelaminated particle board, for cubbord and shelvs interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

Material and labour for 6 mm thick teak wood lipping for 19 mm thick particle board fixed with nails complete.

S & F Continuous (piano) hinges,of 30mm flap mild steel, bright finish or electrogalvanised

S&F Hasp and staple, 75mm size safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repairs of 25 mm dia aluminium powder coated curtain rod incld fancy type brackets pair complete as directed.

Supply and fixing in repair vitreous china wash hand basin,white,flat back of size 550X400 mm including bracket.

Supply and fixing in repair vitreous china semi pedestal pattern (anglo Indian type) water closet pan white colour including PVC cover.

S/F in repairs PVC valveless, syphonic action type, flushing cistern, capacity 10 ltr low level, white, with inlet, ball valve, float and handle including bracketsincluding all fittings and connections all as specified and as directed .

S&F in repairs Jet spray for IWC including hinges

S&F in repairs toilet paper holder

Supply and fixing in repair brass chromium plated over head shower with revolving joint & 150mm long shower arm for dia 15mm.

Supply & fixing in repairs peg set suitable with 6 Nos of hook with powder coated fixed to wall as directed by Engr-in-charge

Supply and fixing in repair, Brass chromium plated tubular towel rail, 20 mm dia 'D' type,60 cm long between flanges

Supply and fixing in repair pillar taps cast copper alloy with capstan heads, chromium plated,fancy type of size 15 mm bore screwed down high pressure,with or without lettered'Hot' or 'Cold' with long screwed shanks and flynut,screwed for 15mm iron pipe and fixed.

Taking up or down GI water tubing with fittings including cleaning for re-fixing or removing from site of size 15 mm bore

All as per item No 76 above but 20 mm bore

All as per item No 76 above but 25 mm bore

Supply and fixing of GI water tubing,medium grade with fittings,fixed to wall and ceiling or laid in floor of size. 15 mm bore

All as per item No 79 above but 20 mm bore

All as per item No 79 above but 25 mm bore

Cutting chases in brick wall,girth not exceeding 10 cm for concealing water tubing and making good in cement mortar (1:3).

Supply and fixing in repair stop valve cast copper alloy,chromium plated,fancy type with long shank and cup concealed type of size 15 mm bore.

Supply and fixing in repair, bib taps,cast copper alloy,,chromium plated,fancy type with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed ,concealed of size 15 mm bore.

Dismantling of water tanks capacity 500 ltr and removing to site.

Supply and fixing of rotational moulded HDPE water storage tank 500 litre capacity(cylindrical vertical with closed top) double layers,ISI marked,hoisted and fixed in position complete.

Supply and fixing of ball brass valve,high pressure with polythene float and fly nut,screwed for iron pipe or brass ferrule of size 20 mm dia complete.

Supply and fixing in repair, gun metal valve with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore.

S&F in repairs glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 75mm dia PVC (SWR) bends any radius

Demolition of AC/ CI pipe of 100 mm dia ,set in cement mortar,fixed in any position.

Demolition of AC/ CI pipe of 75 mm dia ,set in cement mortar,fixed in any position.

Supply and fixing of cast iron (spun) soil,waste and vent pipe 100 mm bore, any length with or without ear with cement joint,fixed to walls.

Supply and fixing of cast iron (spun) soil,waste and vent pipe 75 mm bore, any length with or without ear with cement joint,fixed to walls.

Supply and fixing of CI bend 100 mm bore with oval accessories door.

Supply and fixing of CI bend 75 mm bore with oval accessories door.

Supply and fixing of CI Tee or single branch piece 100 mm bore with oval access door.

Supply and fixing of CI Tee or single branch piece 75 mm bore with oval access door.

Supply and fixing of CI vent cowl 100 mm dia.

Supply and fixing of CI vent cowl 75 mm dia.

Supply and fixing of SGSW gully trap 150 X 100 mm size square or round mouthed type ;P'

Supply and fixing of 75 mm CI Nahani trap with PTMT gratings(minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe for wash hand basin., 600mm long.

Removal of old water proofing treament any nos of layers and of any description, incl.demolition and or taking off PCC padding/plaster on RCC slab,also including removing of bitument coating to show the concrete surface to its true colour and roughening etc complete.

M&L for rendering 10mm thick in CM 1:3 mixed with integral water proofing compound all as per mfr inst over conc surfaces finished even and smooth w/o using extra cement.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfacesprimed surface by forced application complete all as specified

Material and labour for PCC (1:5:10) type E-2 using 40 mm graded stone aggregate in filling and mass concrete as in sunken portion..

M&L for 30mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate finished even & smooth without using extra cement mixed with WPC on bottom of sunken portion with proper slopes towards spout etc complete.

Material and labour for 10 mm thick rendering in cement mortar (1:3) on concrete surfaces finished even and smooth with using extra cement in sunken portion mixed with WPC

M&L for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m in sunken portion.

Taking down carefully aluminum/copper point wiring (light/fan/socket/power) complete including fittings such as switch, socket, ceiling roses light fittings etc and and making good disturbed surface of wall all as specified and directed by Engineer-in-Charge. (Serviceable light fitting to be kept separately for re-use).

Material and labour point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (F.R.L.S) insulated unsheathed 1100 Volt grade cable in and incl concealed PVC Conduit as required (ISI Marked) with accessories including new pressed steel terminal boxes (sunk in wall ) including, 3.00 mm thick plastic laminated sheet top cover with 1.50 sq mm insulated unsheathed PVC multistranded covered copper conductor for common earth and connecting to earth dolly making good disturbed surface of wall incl matching the colour of wall/ceiling with extisting wall/ceiling all as specified and directed for :- (a) One light point controlled by one switch one way

All as per item No 114 above but One fan point controlled by one switch one way

All as per item No 114 above but One socket out let 5 Amps 5 Pin on same board with other switch

All as per item No 114 above but One socket out let 5 Amps 5 pin on independent board

All as per item No 114 above but One call bell point controlled by one bell push .

All as per item No 114 above but One light point controlled by two switch two way

All as per item No 114 here in before but cable of size 2.5 Sqmm for one 15 Amps socket outlet on independent board and multistranded insulated copper earth continuity conductor of size 1.5 Sq mm all as specified and directed by Engr-in-Charge.

Supply and fixing switch piano flush type 5 Amps single pole one way.

Supply and fixing socket out let 2 in 1 multi pin 5 Amps flush type universal.

Supply and fixing switch piano flush type 15 Amps single pole one way.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type

Supply and fixing Ceiling rose on PVC board size 65 X 50 mm three terminal Complete.

Supply and fixing angle lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet or replace Phenolic laminated sheet all as per directed .

Taking down old fittings and fixing only LED Tube light fitting 20/22 Watt including tube rod , flexible copper cable of required length from ceiling rose to light fitting complete all as specified. Note:- LED tube light fitting 20/22 watt shall be issued under sch 'B' free for fixing.

Taking down old fittings and supply & Fixing Energy saving new generation 10W LED bulkhead luminaire with opal diffuser complete all as specified. Make : Havells LHEOAOP7UZ6W010 or equivalent to Phillips/CG approved by Engr-in-charge.

Taking down old submain wiring and M & L for sub main wiring with 2 single core 6 Sqmm stranded copper conductor PVC (F.R.L.S) insulated unsheathed 1100 Volt grade cable in and incl surface PVC Conduit of 25/32mm as required, PVC board with all fittings including 4 Sqmm copper conductor as earth continuity all as directed.

Taking down any type of unsv. security light and fixing only 25 watt LED light fitting Pressure die cast aluminium housing with heat resistant toughened glass & IP66 protection including appropriate size of medium class GI pipe,accessories and necessary connections all as specified and directed by Engr-in-charge. Note:- LED security light fitting 25 watt shall be issued under sch 'B' free for fixing.

Repair to existing Nitch taking out old worn out wooden frame and supply & fixing sheet metal board complete with flush door handle with locking arrangement painted with powder coated finishing with necessary PCC work complete size 60x45x20 cm including fixing the DBs and MCBs

Repair to existing Nitch taking out old worn out wooden frame and supply & fixing sheet metal board complete with flush door handle with locking arrangement painted with powder coated finishing with necessary PCC work complete size 60x60x20 cm including fixing the DBs and MCBs

Supply & fixing of MCB single pole 240 volts 6 to 32 Amps. Make : Same As DBs

Supply & fixing of MCB SPN 240 volts 10 to 25 Amps. Make : Same As DBs

Supply & fixing of MCB TPN 415 volt 40 to100 Amps. Make : Same As DBs

Taking down carefully of existing gyser, MCB box and water connection and refixing the gyser, MCB box and complete testing after completion of building work.

Supply and replace in repairs SP metal clad plug outlet with sheet metal enclosure complete with plug top and MCB SP-20 Amp Make : LEGRAND/ABB

S & F MCB DB SPN 8 way sheet steel (double door) phospetised powder painted with 200 Amps rated bas bar, neutral link, earth bar and Din rail double door make:- LEGRAND/ABB/HPL/STANDARD.

S & F MCB DB TPN 4 way sheet steel (double door) phospetised powder painted with 200 Amps rated bus bar, neutral link, earth bar abd Din rail double door make : LEGRAND/ABB/HPL/STANDARD.

S&F powder coated aluminium window sliding with two track sliding, frame & two track of powder coated aluminium section 61.85X31.75 X 1.20mm thick and shutter of powder coated aluminium sec 18mmX40mmX1.20mm incl necessary joining cleats, glazing clips,rubber packing anodised snap beading,screws etc and locking arrangement etc,making good the disturbed surface in CM(1:3) complete all as specified and directed (glass pane shall be measured and paid separately)

S&F powder coated aluminium window /ventilator shutters side hung type, frame of powder coated aluminium sections 61.85x31.75x1.20mm thick and shutter of powder coated aluminium section 18mmx40mmx1.2mm including necessary joining cleats,glazing clips,rubber packing,anidised aluminium snap beading,screws,anodised aluminium fittings such as peg stays 150mm long(1no) hinges type B-21 100mm long(2no) suitable handle (1no) making good the disturbed surface in CM(1:3) complete all as specified (glass pane shall be measured and paid separately)

S&F aluminium anodised grill of 7mmx3mm squares rectangular triangular circular shape aperture n.exc 7.00cm in length or width fixed with H or F channel make grill No. 20 of décor or equivalent

Haritwal traders

boon construction company

M/s Ajay kumar Garge