Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC | L1 | Accepted-AOC Awarded as first lowest bidder L1 | |
| 2 | L2₹34.7 L+₹1.2 L (3.60%)Rejected-AOC | L2 | Rejected-AOC second lowest bidder | |
| 3 | L3₹40.2 L+₹6.7 L (20.0%)Rejected-AOC 3RD FLOOR BHAKTAMAR RESIDENCY SOMNATHNAGAR ROAD PUNE 411014 | PUNE | PUNE | MAHARASHTRA | 411014 | L3 | Rejected-AOC Third lowest bidder | |
| 4 | L4₹41.8 L+₹8.3 L (24.7%)Rejected-AOC GROUND FLOOR 281 1 D SHIVRAI NAGAR SAI MIRACLE ROAD RAHATNI PUNE 411 017 | PUNE | PUNE | MAHARASHTRA | 411017 | L4 | Rejected-AOC Forth lowest bidder | |
| 5 | L5₹43.6 L+₹10.1 L (30.2%)Rejected-AOC NEAR SWAMI SAMARTH MANDIR GROUND FLOOR 28 1 1 D SHIVRAJ NAGAR SAI MIRACLE ROAD RAHATNI PUNE 411 017 | PUNE | MAHARASHTRA | 411017 | L5 | Rejected-AOC fifth lowest bidder |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
21 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
REPAIR MAINTENANCE OF EM INSTALLATION AND CONNECTED WORK UNDER GERD PASHAN
2023_MES_630388_1
GERD/PSN/TOKEN/41 OF 2023-2024
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GERD PASHAN PUNE
₹90,000
Yes
15 Feb 2024
30 Nov 2023
23 Dec 2023
30 Nov 2023
21 Dec 2023
14 Dec 2023
30 Nov 2023 - 7 Dec 2023
Amount
Surface excavation in soft/loose soil not exceeding 30 cm in depth and averaging 15 cm deep complete all as specified and directed.
Material and Labour for spreading stone aggregates of guage not exc. 20 mm, deposited,spread and levelled in layers n exc. 15 cm thick over sand layer including proper levelling complete all as specified and directed by Engr-in-charge.
Supply install testing and commissioning in repair 22 KV outdoor type Polymer based gang operated air brake switch triple pole, suitable for verticle mounting complete with GI operating rod of suitable length for operating mechanism worked from ground level complete in both OFF and ON positions, for current rating upto 200 Amps,each pole consist of galvanised steel base HT insulators as per BSS/ISS non ferrous knife and spring loaded contacts, arcing horns of adequate section to brake magenetizing current of the transformers. All ferrous parts hot dipped galvanised and non ferrous parts suitably tinned to withstand weather complete all as specified and directed.
Supply and Fix in repair Polymer based dropout fuse unit complete set suitable and including for 22 KV, HT outdoor and dropout type of capacity 200 Amps including jumper connections with copper flexible designed jumper and testing and commissioning complete all as specified and directed
Material and Labour for ACSR conductor (Ferret) jumper connections of following lengths both ends secured with suitable aluminium lugs or one end with AI lugs and other end plain for binding with conductor encased with polythene sleeve, RYB colours of suitable dia complete all as specified and directed for :- a) Not exceeding 0.75 meter length.
b) Exceeding 0.75 meter length but not exceeding 1.5 meter length.
c) Exceeding 1.5 meter length but not exceeding 2.5 meter length.
d) Exceeding 2.5 meter length but not exceeding 3.0 meter length.
Material and Labour for Sub station battery charger industrial grade 30 Volts DC input 230 VAC,50 Hz,1 Ph. DC output Nominal 30 V, output current 6 amps suitable for battery bank of 30 VDC/60 AH. Complete including necessary indications and protections viz. charging current meter, charging volt meter, power ON, out put ON, reverse polarity, charger ON, in put HRC fuse link, over current, short circuit, over charging, over temp, reverse polarity by means of fuse, controls e.g. input ON/OFF,out put ON/OFF, DCCDB ON/OFF etc., main cord and plug of suitable length and rating and heavy duty terminal blocks at out put complete all as specified and directed.
Material and Labour for Lead Acid battery bank consisting of heavy duty 2 VDC, 60 AH battries for sub station application to be used for operating controls connected as battery bank of 30 VDC each (2 VDC, 60 AH x15 Battries in series) connected with suitable rating of copper conductor wire, battery terminals, float for monitoring of electrolite level, complete placed and mounted in space / wooden/ fibre battery mounting stand anti corrosive complete duly connected and tested with battery charger complete all as specified and directed. Make : EXIDE / Microtek / Luminous complete all as specified and directed.
Material and Labour for Preperation of old painted steel chain link fencing and gate of Sub station and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge
Material and labour for special factory made earthing electrode comprising of hot dipped galvaized MS flat inserted in to GI pipe of 88 mm bore (outer), 3meter length, filled with non magnetic anti corrosive material specially developed for ground resistance enhancement power around the electrode to retain moisture conforming to IS 3043 including necessary boring in ground of 150 / 200mm dia in any type of strata connecting to test point all as specified and directed (the earth resistance shall be less than 1 ohms . Contractor shall improve the earthing resistance within the permissible limit without any extra cost complete all as specified and directed. Make:- U-Protec PVT Ltd / True Power / Yash Earthing Solutions
Taking out steel tubular sewaged poles LT/ HT 9/ 11 meter long and removing to store for safe custody or issue under schedule of credit complete all as specified and directed.
Supply, install, testing and commissioning of LT Panel CPRI approved cubical with kyosk type mad of 2.0 mm thick indoor type with IP 65 grade of protection CRCA sheet, powder coated, with support of 50 mm X 50 mm X 6 mm angle iron bottom frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front and back openable inspection doors heat shrink PVC sleeved aluminum bus bar of capacity 800 Amps, 3 Phase, 4 wire, for each phases and neutral fixed on suitable insulator all housed in suitable bus bar chamber and provision and fixing of multifunction meter, CTs of suitable ratio, and LED pilot indication lamps complete along with provision of necessary cable entry/ exit boxes for all incoming and out going cables with providion of hoes for cable glands etc fixed on suitable PCC foundations, testing on completion complete all as specified and directed and shall be comprising of the following:- Incomer MCCB with thermal magnetic Release range 500 Amps, 4 Poles, 50 KA breaking capacity - 01 No, Outgoing MCCB with thermal magnetic Release range 320 Amps, 4 pole, 50 KA breaking capacity - 01 No, MCCB with thermal magnetic Release range 100 Amps, 4 pole, 25KA breaking capacity - 01 Nos, MCCB with thermal magnetic Release range 125 Amps, 4 Pole, 25 KA breaking capacity - 01 Nos coloured heat shrinkable PVC insulated Aluminium bus bar 800 Amps, 3 Phase, 4 wire, LED Pilot lamps (R, Y & B) -01 set, LED Digital Multi function metre with CTs - 01 No, extended Rotary handless & spreder terminals for all MCCBs.
Material and Labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundations of stays and poles etc complete including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
All as per item no 16 above but PCC 1:2:4 type B-1 with 20 mm graded stone aggregate for coping of pole complete all as directed.
Material and Labour for repairing the existing LT feeder pillar boxes by welding the damaged hinges / aligning the doors to fit properly including providing rubber gasket and locking arrangement complete all as specified and directed by Engr-in-Charge.
Supply and Fix in repair LED street light /road way luminaries 45 watts with pressure die cast housing heat sink with IP 66 protection, interchangeable electronic driver high efficiency longer life, protection against high surges , high /low voltage cutoff, open/short circuit protection and high power factor LEDs as light source including fitted on existing street light pole bracket complete all as specified and directed. Make:- Havells Cat ENDURASUNDOWNSL45WLED765PASYBOPC / Crompton Greaves / Philips.
Supply and Fix in repairs street light bracket made out of 40mm dia light grade GI pipe of 1.5 meter long bend to shape including one coat of aluminium paint over a coat of red oxide primer complete all as specified and directed. NOTE:- Rate quoted is inclusive of necessary MS clamps, nuts and bolts as required.
Supply and fix in repairs pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 140x140x100mm internal comprising of one , No MCB single pole of capacity 6 Amps 240 volts and one No terminal for loop in & loop out suitable for single phase street light system including MS clamp fabricated from 25x3mm MS flat iron complete all as specified and directed. Make : Sintex
Material and Labour for 3 core 2.5 sqmm multistranded copper wire passing through steel tubular pole connecting with street light fitting to junction box complete all as specified and directed NOTE :- 3 run of wire shall be measured as one length
Material and Labour for construction of platform of size 2.50m x 2.50m x 1.50m high (outer dimension) built with 150 mm thick PCC (1:5:10) type E2 using 40 mm graded stone aggregate foundation extending 150 mm on both sides of wall, 345 mm thick brick masoary built in CM (1:6), 450 mm below GL & 950 mm above GL duly plastered in CM (1:4) on exposed faces & finishing in same mortar as the work proceeds in faces in contact with soil /floor 50 mm PCC 1:2:4 type B-1 using 20 mm graded stone aggregate laid in bays over 100 mm thick stone hardcore over approved earth filling complete all as specified and directed.
Complete removal of existing treatment including preparation of old painted surfaces by washing, rubbing down and stopping of painted surfaces, painting with one coat of synthetic enamel paint of approved colour on centrifugal pump set of 50 HP to 100 HP capacity including inlet, outlet mains, couplings, sluice valve, non return valve, base plate, pulley with safe gaurd, vacume pipe line, LT panel board and writting the MES / SM number with black paint of suitable size of letters complete all as specified and directed.
All as per item above but for 10 HP to 40 HP centrifugal pump set.
All as per item above but for up to 7.5 HP centrifugal pump set.
material and labour for Rubber mat of size 1mX2mX20mm ISI marked complete all as specified and directed
Material and labour for arresting leakage from pumps of motor capacity 05 HP to 25 HP by replacing gasket, nutbolts, gland packing etc as required complete all as specified and directed Note: Rate quoted by the contractor inclusive of all items as required to arrest the leakages from pumps
Material and Labour for Earth contunity conductor or main earthing lead fixed to wall on recessed or burried in ground or drawn in conduit/pipe fixed to poles or any other indicated situation for loop earthing as required 32x6 mm size galvanised strip complete all as specified and directed.
Supply and Fix in repair rigid PVC line separator made from high grade PVC material, rigid PVC Spacer, distance betwen phase to phase 300mm, suitable for use with 1100 volts grade suitable for 1100 volts 2 conductor feeder complete all as specified and directed
Supply and Fix in repairs rigid PVC line separator made from high grade PVC material, rigid PVC Spacer, distance betwen phase to phase 300mm, suitable for use with 1100 volts grade suitable for 1100 volts 4 conductor feeder complete all as specified and directed
Material and Labour for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed.
Dismantling of fencing wire mesh, any type complete all as specified and directed.
Supply only chain link fencing of size 50X50X3.15mm dia weight per sqm n.exe 4 kg complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.
Supply and Fix framed work as in doors or gate of angle iron or other section with gussets plate, rails, braces etc drilled for fixing of steel seating other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete.
Supply and Fix mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. Note: 1. The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account. 2. Embedded portion of fencing post shall be painted to two coats of tar coal and cost of the same shall be deemed to be included in quoted rate.
Material and loabour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm & n exc 10cm long complete all as specified and directed.
Material and labour for fabrication and installation of Glow Sign Board in size 1828.8mm x 1219mm x 177.8mm made of Flex/ Acrylic board, with digital contents all as directed by Engineer-in-charge at one side of the board, GI plain sheet not less than 1mm thick cubical open the flex/Acrylic board and suitable for mounting on wall /gate complete all as specified and directed by Engineer-in-Change. Note :- The rate quoted is deemed to include for fabrication and welding and fixing all as directed.
Supply and fix pre painted galvaliume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.
Material and Labour for Material and Labour for prepration of old painted surfaces for Outdoor/indoor 22 KV VCB Panel of any Size with two coat of synthetic Enamelled Smoke gray paint after removing all dust and rust and paint shall confirm to IS 2032 complete all as specified and directed
Material and Labour for prepration of old painted inner side of VCB for Outdoor/indoor 22 KV VCB Panel of any Size with two coat of synthetic Enamelled Epoxy paint after removing all dust and rust and paint shall confirm to IS 2032 complete all as specified and directed
Borole Electricals
Adinath Technical Services
YOGESH ELECTRICALS
ASHA ASSOCIATES
AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd
SKS Electricals
MAYUR ELECTRIC SERVICES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .