SPECIAL REPAIR TO SECURITY WALL AND OTHER SANCTIONED WORK AT NAMS.

Amount

M&L for brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete incl demolition of brickwork /stone built in cement mortar complete all as specified and directed.

All as per srl item 2 here in before but except bricks complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.

M&L, rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) using WPC as per user manual complete all as specified and directed. (WPC shall be measuared seperatly 200ML for 50kg cement bags or as per manufacturer's instructions).

Supply only liquid WPC complete all as specified and directed.

M&L, rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement complete all as specified and directed.

M&L for galvenised low carbon durable twisted hexagonal woven chicken wire mesh with hexagonal face distance between faces of hexagonal range from 13-50 mm including fixing with drilling, nailing with nails head of min 0.5 inch to properly fix with washer if require with wire not less than 0.9 mm dia (concealed) at a distance not more than 20cm bothways and applying RCC 1:1½:3 (using 6mm graded stone aggregate and coarse sand) for the thickness not less than 25 mm with plasticizer of approved make in appropirate cement ratio as per manufacturer instruction at any height on ceiling complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of distemper oil emulsion on ceiling over one coat of primer etc complete all as directed.

M&L for applying one coat of distemper oil emulsion on ceiling over one coat of primer etc on old surface & preparation of surfaces, complete all as spcified and directed .

M&L for preparation of new plastered surface and applying two coats of oil bound distemper on wall over one coat of primer etc complete all as directed.

M&L for applying one coat of oil bound distemper by spray machine incl preparation of old surface on walls through electrical operated grinder etc, incl necessary minor repair of wall by putty complete all as specified and directed.

M&L for applying two coats of cement base paints over one coat of primer on walls etc, incl preparing new surfaces of walls by brooming down or by steel wire brushing complete all as specified and directed.

M&L for applying one coats of cement base paints on walls etc,incl preparation of old surface of wall complete all as specified and directed.

M&L reparing of RCC projection, chajja, roof facia, celling by scrapping, cutting, derusting and cleaning exposed reinforcement surfaces of damaged loose RCC surface and applying neat cement slurry @ 3 kg/Sqm and filling the surface with cement plaster 1:3 one or two layer of 10 mm as reqd or PCC 1:2:4 as directed by Engr-in-Charge with or without facia and smooth finished and smotth edges incl two coats of finished to match with the existing surface at any height and in any situation including necessary form work complete all as specified and directed.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring and all as specified and directed.

M&L for non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

All as per item 18 here in before but area of each tile exc 0.11 sqm but not exc 0.18 sqmin floor, skirting, dados complete all as specified and directed.

M&L for glazed ceramic coloured/printed / dark tiles size 300x200mm x7mm thick on vertical surface in skirting /dado ,set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC/GE, incl dismantling and rubbish off the primises etc all as specified and directed.

M&L for 18-20 mm thick machine cut kota stone slab laid over 15 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishing incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm agg.) in plinth protection, path and paving incl demolition and rubbish off the primises complete as specified and directed.

S&F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.

S&F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with flat bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.

S&F in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directed.

S&F in repair vitreous china urinals, half stall type (420 x 395 x 635 mm) , complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling all as specified and approved by Enger-in-Charge.

S&F in repair vitreous china ware over counter ovel wash hand basin, any colour, size 570 x 450 mm size with leg including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling & bottle trap all as specified and approved by Enger-in-Charge.

S&F in repair Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

S&F in repair Stop/Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S&F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S& F for in repair swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed .

S&F in repair PVC waste pipe 32 mm to 40 mm dia (corrugated) for wash hand basin/sink fixed in repair complete all as specified and directed.

S&F for PVC connections 45cm long superior quality with PTMT nut on both side complete all as specified and directed.

S&F in repair for CP fancy type 100mm size chromium plated shower roses with or without swivel joints ,any size including fixsing to steel pipe or union complete all as specified and directed.

S&F in repair grating round 100mm size of CP complete all as specified and directed.

S&F for 15 mm bor GI tube medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc incl taking up or down old tube complete including cutting closes and make good in CM 1:3 complete all as specified and directed.

S& F in repair 20 mm bore G.I tubing in new or old location (wall/Roof) with all fittings incl taking up or down old tube complete all as specified and directed.

S&F for rotational moulded polythene 500 litres triple layer water storage tanks cylindrical vertical with closed top hoisted and fixed in position incl 20 mm dia float valve with aluminium fitting incl old disconnecting and taking down complete all as specified and directed.

All as per Item 39 here in before but 1000 litres water storage tanks.

M&L for demolition of cement concrete as in sunken floor of bath,wc and kitchen of any description and any position not otherwise specifically provided complete

M&L cement concrete in foundation above filling and mass concrete type F2 1:7:12 (40mm graded agg) as in sunken floor complete all as specified and directed.

M&L for providing cement concrete PCC 1:2:4( Type B-0) using 12.5 mm graded aggregate as in fillets at corners specialy provided in sunken portion of wc.bath & kitchen etc complete all as specified and directed.

M&L for preparation of surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be torched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L for PCC 1:2:4 type C-0 as in roof Pading (average th 50mm) (using 12.5 mm graded aggregate ) complete all as specified and directed.

M&L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed.

Dismantling of brick tiles single layers on roof, jointed and grouted / pointed in cement mortar including cleaning serviceable tiles and stacking properly for re-use, disposal of unserviceable tiles and debris /rubbish from site complete all as specified.

Demoliton of mud Phuska in roofs any thickness including mud plastering and leeping (whether full thickness removed to distance not exceeding 500metre or only a part thereof complete all as specified.

Material and labour for 40 mm thick brick tiles laid over and including 20mm screed bead in CM 1:6 and joints grouted flush in CM 1:3 mixed with 5% of crued oil by weight of cement, complete all as specified and directed.

All as per item 49 here in before but exept brick tiles

Material and labour for raking out joints/pointing to brick tiles, laid flat in floor, paving and flush pointing in cement mortar 1:3 mix WPC 200ML for 50kg cement bags or as per manufacturer's instructions complete all as specified.

Demolition of reinforcement cement concrete any description & in any position not otherwise specifically provided for roof slab, coloum beams, staircase, landing, chajja and footing fdn and similar suspended work with separating, scrapining and cleaning of reinforcement incl all remain portion ordered to not desmantled supporting with MS scofolding and shuttering as directed by Engr-in- charge

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter complete all as specified and directed complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down shutter and cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface each scomplete all as specified and directed.

S&F for 2nd class hard wood glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.24(a) and fitted to chowkahts fixed with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with wire staples or wooden beads incl taking down shutter and two coat of synthetic enamel paint over a coat of red oxide on wooden surface & cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.

S&F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 100mm, type C-21 complete all as specified and directed.

S&F for aluminum handles cast type anodized 150 mm long (ISI Marked) complete all as specified and directed.

S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

S&F mild steel sliding door bolt 250 mm long plate type stove enameled black with bright bolt not less then 12 mm dia with and including minimum 6 bolt and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.

S&F in repair, 200 mm MS ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 8 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.

Material and labour for 3 mm thick sheet glass pane ordinary quality and glazing with oil putty and clip in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples / beading complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples / beading complete all as specified and directed..

M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A) incl taking down old frame any type complete all as specified and directed.

M&L for one coat of synthetic enamel paint on steel surface incl preparation of old steel surface width or girth exc 10cm all as specified and directed.

M&L for one coat of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

Material & labour for two coats of synthetic enamel painting over a coat of red oxide to new steel or steel based surfaces of any description, over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

Material & labour for two coats of synthetic enamel painting over a coat of pink primer to new wood or wooden based surfaces of any description, over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

S&F in rep for MS curtain road powder coated of 18/20mm dia with finials and bracket with matchable complete all as specified and directed.

supply and fixing in repair PVC (SWR) pipes single socketed in any length with rubber ring joints 100 mm dia laid in trenches or in floorsor fix to walls complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 100 mm dia with access door complete all as specified and directed.

S&F for PVC(SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75/100mm complete all as specified and directed.

S&F for 100 mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. .

supply and fixing PVC (SWR) bends any radius of 100 mm bore complete all as specified and directed.

M&L in repair for providing precast conc. louvers and Jallies 25mm thick type B-O, 1:2:4 using 12.5mm graded stone agg and set in cement mortar 1:4 in repairs incl dismantling complete all as specified and directed

S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) complete all as specifed and dirtected.

M&L Form work to sides of pillars posts columns and stanchions etc for fair and finished surface complete all as specified and directed.

M&L Reinforcement cement concrete Nominal mix Type B0 1:2:4 using 12.50 mm graded stone aggregate for Plinth band, lintle band or beams, for columns, pillers, piers, post or boundry wall at the hight of nexc 3.50m above GL etc complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over cut to length bend to shape rtequired including cranking binding spirally for hooping for columns hooking and binding with and including mild steel wire(anneled not less than 0.9 mm dia or securing with clips quility conforming to Fe -410 S or Fe 410-0 complete all as specified and directed.

All as per item no 81 here in before but 8 to 10mm dia bar.as stirrups complete all as specified and directed.

Dismantling or welding cutter cutting of MS fencing posts any section incl taking out embedded portion and making good distrubed rcc band of boundry wall as per directed by Engr-in-charge

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including dismantling of old rusted barbed wire complete all as specified and directed.

S&F MS angle Flat Iron and other steel section, drilled and countershunk, embedding in concrete and screwing etc post and struts in fencing inluding cutting tops to shape as directed, drilling holes, notching for wires etc flat iron fillets, round bar and including nut,bolt & washer of appropriate length for securing and fixing as welding to exist angle as directed all as per specified and directed conforming to Fe-290 Gde E-165.

Fixing only of old MS angle Flat Iron and other steel section, drilled and countershunk, embedding in concrete and screwing etc post and struts in fencing inluding cutting tops to shape as directed, drilling holes, notching for wires etc flat iron fillets, round bar and including nut,bolt & washer of appropriate length for securing and fixing as welding to exist angle as directed all as per specified and directed conforming to Fe-290 Gde E-165.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and width of 0.50m as required and directed of an colour profile AZ-150 with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws with MS angle/Flat iron framed and all as specified and directed by EIC.

M&L Rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafter and running rails and guldes for sliding doors. Fixed with anngle cleats, MS nut bolts on wall covering sheets etc or other connecting plates complete all as specified and directed by Engineer-in-Charge.

M&L mild steel bolts purpose made, with hexagonal or squate head one end and screwed the other, or screwed end to be fitted with washers and one hexagonal or square nut, exc 25 cm long complete all as specified and directed.

M&L for broken glass size as per directed coping on top of wall in cement concrete 1:2:4 using 20mm graded aggregate in layer is not less than 0.05m thickness as on full girth of security wall top surface as per directed by Engr-in-Charge complete all as specified and directed.

M&L MS framed work such as grills, gratings with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work confirming to Fe 410 or Fe 310-0 in repairs complete all as specified and directed.

Excavating in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm complete all as specified and directed.

Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

M&L for brick work with sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:4) all as specified and directed.

M&L for PCC (1:3:6, C2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded stonr aggregete)as in coping,benching etc complete all as specified and directed.

M&L for 15 mm thick rendering on external surface with cement mortar (1:4) on fair face of brick or concrete surface finished even and fair (with out using extra cement) complete all as specified and directed.

.M&L for 15 mm thick rendering on external surface with cement mortar (1:4) on fair face of brick or concrete surface finished even and fair (with out using extra cement) incl taking down of old plastered complete all as specified and directed.

Taking down point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for Point wiring with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in existing conduit for one light / fan point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)

All as per Srl item No 101 here in before but on the same board complete all as specified and directed.

All as per Srl item No 101 here in before but on the Independent board complete all as specified and directed.

All a per item No 101 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and fixing switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.

Supply and Fixing socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement switch type regulator 5 step 230 volts AC complete all as specified and as directed

Supply and ceiling rose 65/50 mm two to three terminals complete all as specified and directed.

Supply and fix MCB 32 Amps single pole with neutral, AC 230 Volts complete all As specified and directed.

Supply and fix MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fixing Sheet metal enclosure for DB's when MCB's to be used single door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified and directed.

Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Material and labour for replacement of lamp holder insulated body with 9 Watt LED Bulb, back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm 230V AC cool day light 6500K having maximum height 1020mm heavy duty complete all as specified.

Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 125 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. (Note:- Out going MCB shall be measured and paid for separately)

Supply and fix exhaust fan, steel body single phase 230V of size 250 mm sweep with blades, frame and louvers all as specified and directed.

Supply and fixing in replacement of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed.

Supply & fix LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens complete all as specified and directed.

Supply and fixing of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge

Supply, laying and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Excavation trenches not exceeding 1.5m wide & not exceeding 1.5m in depth for and getting out in any of soil complete all as specified and directed.

Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified and directed.

Removal of surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Sand cushioning to cable with dry fine sand in trenches 8cm below the cable and 15cm above the cable after laying complete all as specified and directed.

M/L Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified

Supply and lay on wall/ floor etc GI pipe medium grade of dia 32 mm for protection of cable complete all as specified and directed.

Taking down ceiling fan, exhaust fan in situ and refixing after servicing, repairing and painting to ceiling fan/ exhaust fan including exhaust fan louvers, scratching old paint and preparation of surface for painting with one coat of white / grey enmeled paint and including cable from ceiling rose to fan complete all as specified and as directed.

tarlok singh contractor