Repairs and Renovations Of Arulmigu Azhagiya Koothar Temple At Kattarimangalam, Sathankulam Taluk Thoothukudi District

Amount

Dismantling, Clearing away and carefully stacking materials useful for re-use

Pressed tiles & Weathering Course

Dismantling floor finish and dadooing walls in cement mortar with mossaic tiles / Glazed Tiles, cuddappah slabs etc. complete complying with standard specifications and as directed by the departmental officers.

Clean Removal of cement plaster from walls etc.. Complete complying with standard specifications and as directed by the departmental officers.

Dismantling Plain Cement Concrete etc. Complete complying with standard specifications and as directed by the departmental officers,

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus by the departmental officers with an initial lead of 10mts and initial lift of 2mts. and clearing and levelling the site, etc., complete complying with standard specification

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

R.R Masonary in cement mortar 1:5 (one cement, and five crushed stone sand) for foundation and basement including simultaneously pointing above ground level with the same mortar etc., complete

Cement Concrete 1:5:10 (One Cement, five crushed stone sand and Ten hard broken stone jelly) using 40mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc.which require only nominal strutting using mild steel shetts of size 90cm X 60cm and 10 BG stiffened with welded mild steel angles of size 25mm X 25 mm X 3mm for boarding, laid over silver oak joists of size 10cm X 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. (payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supoorts and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90X60 cm and 10BG stiffened with welded mild steel angle of size 25mm X 25mm X3 mm for boarding laid over silver oak joists of size 10Cm X 6.50 cm spaced at abote 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. c omplete complying with the standard specification. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing and laying in position, standardised concrete mix M -20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, includiing admixture (plasticiser - super plasticiser) in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5cu.m.) 7730 kg. of 20 mm machine crushed stone jelly and with about (3.3cu.m.) 5156kg. of 10-12 nn nacgube crushed stone jelly and with about (4.79 cu.m.) 7670kg. of crushed stone sand . nbut exculding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, ect. and providing fixtures like fan clamps in the RCC floor-/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials)

Foundation&Basement

Ground Floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Plain Cement Concrete 1:2:4 (One cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat inculding laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

providing expansion joins of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non - absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5 mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed

Brick work in following cement mortar using best quality of Country bricks of Size 8-3/4" X 4/-1/4" X 2-3/4" for foundation and basement including curing, etc., complete complying with standard specification

In Cement Mortar 1:6 (one cement and six crshed stone sand)

In Ground floor

Flooring with cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100 mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and labour charges for paving and pointing with cemtnt mortar 1:5 &combibation mortor 1:1:5 etc complete

Providing granothlic floor finish of the following thickness with plain cement concrete 1:2;4( one cement two crushed stone sand our four aggregate ) using 10 to 12 mm gauge hard broken stone jelly including laying finishing and the top rubbed smooth with power trawl thred lining ,curing ect.complete complying with standard specification and as dirceted by the departmental officers. ( The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

20 mm thick

supplying and fixing mild steel grill for windows, ventilators, etc., including priming coat

Weathering course in brick jelly lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 nu volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping jagger water, etc, complete as per staandard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles following size of size of approved quality set in Cement Mortar 1:3 (one cement and Three crushed stone sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with re ixide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Pressed Tiles of 230 mm X230 mm X 20mm

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work

Vimanam / Gopuram upto 15' - 0' height

Thorough scrapping of old plastered surface

Pointing the cut stone joints with LM 1:1:5, 20 mm deep including cost of special tiles such brush and watering, curing etc complete, as per standard specification

Supplying and fixing in position of country wood Frame. Including Labour charges, cost and conveyance of all materials furnitute fitting etc complete with standard specification

Plastering with cement mortar 1:5 (one cement and five plastering sand) 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting with multicolour (panchavarnam) good water based exterior emulson paints complete for the Vimanams/Gopurams including cost and conveyance of all materials, labour charges including Artist painter, working in heigts, lifting of materils, cost of brushes etc. complete - which including all extra for foldings - 100sft, superficial area

up to 15' Height

Painting two coats of newly plastered all surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc, complete complying with standard sepcification

Painting new wood work with two fiishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc, complete complying with standard specification. (The make, quality and colour of paint shoud be got approved by the Executive Engineer before use on works)

Painting old wood work with two coats of enamel paint of approved quality and color over one coat of white primer in all floors the rates is to include cost of all materials brushes, scaffolding charges etc, complete complying with standard specifications;

Supplying & fixing Teak wood temple type door inculding all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with std. Specifications

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supply and fixing of 2" X 1" Teakwood reeper on wall along with run of 50 mm X 50 mm UPVSC casing caping cable trunking boz\x with necessary clamps and screws rigidly in the gap of the stone wall (Data-1)

Supply and fixing of single box type 4'20 W LED fitting with TW round blocks on wall or ceilling with PVC unsheathed cooper leads from terminals to the fitting (LED fittings should be of highered company make like phillips/cromption etc) (Data -2)

Supply and fixing of Havells jeta alba flood light 70 W LED fitting with necessary wall grouting clamps with fixing bolts on the ceiling with PVC unsheathed coper leads from terminal to the fitting ( Data -3)

Supply and fixing of 48 W LED street light fitting with pressure diecase Aluminium housing with IP 65 Protection with 25 mm dia G.I pipe and bend class -B complete on wall with PVC unsheathed copper leads MS clamps and Aluminium painting LED fittings should be Higher end / philips make (Data -4)

Supply and fixing of 450 mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall ( SD -118)

Supply and fixing of louvers shutters arrangements for 450 mm (18") sweep light duty AC Exhaust fan (SD - 123)

Supply and fixing of 6 module furface mounting box with combined cover plate plastic fixed with 4 nos 6A 1 way switch and 1 no 6 A universal plug with connections ( Data - 5)

Supply and fixing of 18 module surface mounting box with combined cover plate plastic fixed with 12 nos 6A 1 way switch and 3 nos 6 A universal plug with connections (Data- 6)

Supply and fixing of 12 module surface mounting box with combined cover plate plastic fixed with 8 nos 6A 1way switch and 2 nos 6A Universal plug with connections (Data-7)

Supply and fixing of 20 A DP MCB Switch in suitable 2 pole sheet steel enclosure with earth connection (Data- 8)

Supply and fixing of 8 way single phase and MCB sheet steel enclosure distribution board of double door type metal door with IP43 protection with 1 No.32 A DP MCB as incoming and 6 Nos. 6 A to 32 A SPMCN outgoing in flush portion with earth connection only (The MCB DB and MCB's should be Legrand or higherend make) (Data-9)

Supp;y and fixing of 63A MCB Switch in suitable 4 pole sheet enclosure in flush with wall with earth connection (Data-10)

Supply and fixing of 63A ELCB Switch in suitable 4 pole sheet steel enclosure in flush with wall with earth connection (Data-11)

Supply and fixing of TNEB meter board suitable for 3 phase 63 A service connection made up to suitable angle iron frame work of size 2 feet X 1-1/2 feet using angle iron of size 1-1/2" X 1-1/2"X1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet X1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 nos. 63A fuse units (500V). 1No. neutral link, copper earth flat of size 1" X1/4" with inter connection of EB meter to fuse units by 16 sq.mm PVC insulated copper wire with earth connection complete (SD-129)

Supply and fixing of 65 mm (2.5") dia G.I pipe (Class B) of 6 mts length with 300 mm X 300 mm X 6mm MS plate duly welded at the bottom with cone roofing and construction of masonary pedestal and fixing of PVC synthetic fibre box of 8 nos (8"X6") to house 6A SP MCB (Legrand make ) control switch with 1 no 48 W LED (Philips make) complete on the GI post with 1.5Sqmm PVC unshealted copper leads with painting of sutable colour (Data-13)

Supply and Run of 2 of 1.5 sq.mm. (22/0.3) PVC insulatd SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling and making good of the concealed portion with suitable colour (Data-14)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm PVC insulated SC unsheathd copper wire and making good of the concealed portion with suitable colour (SD-428)

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour (SD -430)

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour (SD-432)

Supply and Run of 4 of sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continous earth wire connection by 4 sq.mm PVC insulated SC unsheathed copper wire with painting of suitable colour (SD-443)

Supply and clamping of 2X16 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps (SD-217)

Supply and fixing of brass cable gland for 2X 16 sq.mm. PVC armoured LTUG cable with earth connection (SD-183)

Supply and clamping of 3-1/2 X 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD-223)

Supply and fixing of brass cable gland for 3-1/2 X 35 sq.mm. PVC armoured LTUG cable with earth connection (SD0187)

Supply and fixing of 8"X6" PVC synthetic box for cable connection (Data -15)

Supply and run of 1 of No.8 SWG copper conductor on suitable PVC rigid pipe on wall with painting of suitable colour for earth connection (Data-16)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125 mm X 50mm X 6mm with necessary funneling arrangements with necessary masonry work and with 38 mm RCC cover slab for the brick masonry (SD-233)

A ULAGU LAKSHMANAN