Repair/renovation and periodical services of rooms/suits and boundary wall of Munitions House New Delhi

Amount

Works

Taking down old chokhats or frame exc 1.5 sqm but n.exc 4 sqm each.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for apply neat cement slurry @3kg / sqm and rendering 12mm thick wall plaster with 1:4 cement mortar.

M&L for apply neat cement slurry @3kg / sqm and rendering 15mm thick ceiling plaster with 1:4 cement mortar and apply one coat of chalk whitening on ceiling plastered surface.

M&L for Hardcore of broken bricks gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L for Cement concrete Type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete.

M&L for Cement concrete Type B2 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4.

S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.(size of grid 605x605mm).

S&F of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting levelmfixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified..(size of grid 605x605mm).

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions.

M & L for 20mm thickscreed bed with 1:4 cement mortar on floor.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make kajaria, johnson,Somany.

M&L for coloured Vitrified Ceramic tiles light shade 10 mm thick on wall suface (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make kajaria, johnson,Somany.

Grinding and polishing of existing marble floor.

M&L for 3mm thick wall care putty on wall. Make JK, Birla,asian.

M&L for preparation of new wall surface apply two or more coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification Make: Nerolac-BEAUTY,Asian-TRACTOR EMULSION, Berger- BISON approved by EIC.

M&L for preparation of surface Wall/ceiling painting with plastic emulsion paint two coats brand and colour is approved by EIC. Make: Asian, berger, dulux.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats.

Providing and fixing of 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance tospreadof flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and apply neat cement slurry 3 kg/Sqm and 20mm thick 1:3 cement plaster on concrete or brickwork surface

Supply only liquid water proofing compound for floor plaster .

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.make sika wp shield, asian, dr fixit

M&L for Applying bitumen cutback evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre.

M&L for rough cast plaster on wall surface.

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

S&F of 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneer with lipping/frame to match. Make : greenply,maxon , doormat.

S&F of 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed.

S&F of 150mm aluminium handle type anodised.

S&F200mm of Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F 375mm Mild steel skeleton tower bolts with steel sheet pressed plate and staple stove enamelled black, and mild steel bright bolt and fixed.

S&F of roof of trusses(framed work, trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe 410-w(GDE-E-250) quality A.

S&F of 2mm thick polycarbonate plain sheet of any colour , make embossed,lean,jindal approved by EIC.

M&L for reinforced cement concrete in beams etc M20 with 20 mm graded aggregate.

S&F of TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.make tata, jindal, sail.

Formwork for flat to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Preparation of new iron surface and applying priming coat with red oxide and two coat of synthetic enamel on prepared surface .Make asian apcolite, nerolac hi gloss, berger as approved by EIC.

S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make: jindal , bhusan, Tata.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately).

S&F Mild Steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F figured glass 6.0mm thick n.exc 0.5 sqm with glazing and oil putty.

M&L for 8 mm thick granite Stone tile work of desired colour and shed for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m.

S&F of Tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges.Make- jaquar, hindware, kohler,parryware.

Fittings

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)Make- jaquar, hindware, kohler,parryware.

S&F Soap dish, vitreous China white,soap tray embedded in the wall approximate size 160x 160x90mmMake- jaquar, hindware, kohler,parryware.

S&F single piece/one piece Vitreous China floor mounted pedestal type water closet pan (european pattern),shape, size and colour as decided by EIC with all necessary fittings required.Make- kohler, parryware, jaquar, hindware.

S&F of vitreous china Bowl shape wash basin with all necessary fittings shape,design and colour as decided by EIC with all necessary fittings of size of atleast (minimum dimension /diameter shall be more than 500mm)Make- kohler, parryware, jaquar, hindware.

S&F of sensor based vitreous china half stall urinal with all necessary fittings shape,design and colour as decided by EIC with all necessary fittings of size of atleast 600 mm length .Make- kohler, parryware, jaquar, hindware

S&F Pillar taps fancy type, cast copper alloy chromium plated screwed down high pr. with or without lettered 'hot' & 'cold' with long screw shank and fly nuts, screwed for pipe, bore dia of pipe 15mm. Make: Jaquar, kohler, hindware,parryware.

S&F waste fittings brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed loose of pipe 32mm.

S&F low density polyethylene (LDPE) pipes or pressure rating 6 kgs/sq.cm fixed complete to walls, ceiling or in floors etc. for waste pipes bore of tube 32 mm.

Taking up or down steel water tubing and connections, including cleaning for refixing or removal to store for bore of pipe 15mm

M&L for steel water tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors for bore of pipe 15mm.

S&F 15mm dia fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. Make jaquar, hindware, kohler,parryware.

S&F stop valves fancy type, chromium plated, screwed down high pr. with crutch or butterfly handle screw both ends for iron pipes or for unions and fixed bore dia of pipe 15mm. Make jaquar, hindware, kohler,parryware.

S&F PVC connection 15mm size with PTMT nuts of length 450mm.

M&L for Cutting chases, pinning in stone,concrete block or slab walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F of One light point or one fan point controlled by one switch with cables 1.5 sq.mm size PVC single core sheathed (copper conductor cable FRLS) cable in PVC conduit pipe.

S&F of One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size.

S&F of Modular switch 1 way 6A, 1 module.

NCI GLOBAL INFRATECH