Work of interior False Celling work for General Manager Chamber, MPEB New City Circle Office, Shahpura, Bhopal

Computer Items :

False Ceiling PLAIN GYPSUM BOARD: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with Plain board conforming to IS: 2095- Part I: 2011 (Board with BIS certification marks)

FLOORING HETEROGENEOUS 2.0 MM THICK PVC VINYL FLOORING Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (EuropeanStandard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR polyurethane reinforced), residual indentationapprox.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge <2kv, all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for groundingelectrostatic electrical charges. good resistance to scratch, slip, chemical and fire, doesn’t favour in growth of fungi & bacteria. 100% recyclable (ecofreindly). Low VOC emissions after 28days of installation (lower than ≤10μg/m3). phthalate free technology. directional in design.The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc.

WOODWORK & FURNISHINGS 12 MM THICK PLYWOOD WALL PANELLING WITH 1.0 MM PREMIUM TEXTURED LAMINATE FINISH Providing and fixing decorative wall panelling comprising approved framework of seasoned hardwood battens/GI channels as required, overlaid with 12 mm thick BWP/Marine Grade plywood, finished with 1.0 mm thick premium textured decorative laminate of approved make, shade and pattern on the exposed surface. The work shall include necessary adhesive, screws, edge lipping, grooves/shadow gaps (where specified), cutting, fitting, finishing, making openings for electrical fixtures, all hardware, scaffolding, labour, tools and consumables, complete in all respects as per approved drawings and directions of the Engineer-in-Charge.