REPAIRS TO FLOORING, JOINERY, DRAIN PIPES, ROOFING, PLUMBING, SANITARY WORKS AND MISC WORKS AT CERTAIN GOVT. MD ACCN OF DAD COMPLEX UNDER AGE B/R (SOUTH) OF GE (SOUTH) BANGALORE

Amount

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 after dismantiling old existing floor tiles including removal of debris outside of MOD land etc complete all as specified and directed.

M&L for Coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 backing coat after dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar bedding and removing upto Brick wall surface and removal of rubbish out side the MD land complete all as specified and as directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade complete all as specified and as directed.complete all as specified and as directed..

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc after dismantling of old existing floor tiles complete all as specified and as directed.

S&F Ultra charged Vitrified Coloured Ceramic tiles (light shade) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade complete all as specified and as directed..

S&F ultra charged Vitrified coloured ceramic tiles (light shade) 8-9mm thick (square/rectangular) area of each tile upto 0.06 Sqm cut from same shade and size of the tile for floor, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4. etc after dismantling of old existing floor tiles complete all as specified and as directed..

M&L for 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty after preparation of surface complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and fair including taking down plaster, raking out joints, hacking for key, scrubbing down with water etc and applying three coats of white wash on ceilings and removing rubbish of the premises and disposed off outside the MD land complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and fair including taking down plaster, raking out joints, hacking for key, scrubbing down with water etc and applying two coat of oil emulsion distemper over a coat of primer wash on ceilings and removing rubbish off the premises and disposed off outside the MD land complete all as specified and as directed.

S&F in repair CPVC pipes 25mm SDR 11 Plain CPVC SDR 11 including fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified.

S&F in repair CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 Including fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F in repair 20mm dia CPVC brass elbow complete all as specified and as directed.

S&F in repair 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F in repair 20 mm dia female/male brass threaded adapter complete all as specified and as directed.

S&F in repair 15 mm CP extension nipple complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC bends any radius 75mm dia complete all as specified and directed.

S&F in repair PVC bends any radius 75 mm dia with access door complete all as specified and directed.

S& F in repair PVC bends any radius 110mm dia complete all as specified and directed.

S&F in reapir PVC bends any radius 110 mm dia with access door complete all as specified and directed.

S&F in repair PVC Single T any radius 110 mm dia complete all as specified and directed.

S&F in repair PVC Single T any radius 110 mm dia with access door complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm branch piece,double (double Y) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm branch piece,double (double Y ) equal or unequal complete all as specified and directed.

Taking down steel windows and ventilators of area n.exc. 0.5 sqm each including all fittings and fixtures and removed from site and disposed off outside MD land complete all as specified and directed.

Taking down steel windows glazed and gauged with guard bars exc. 0.5 sqm and not exc. 1 Sqm each and including all fittings and fixtures and removed from site and disposed off outside MD land complete all as specified and directed. (Both glazed and gauged windows will be measured separately)

Taking down steel windows glazed and gauged with guard bars exc. 1 sqm and not exc. 1.5 Sqm each and including all fittings and fixtures and removed from site and disposed off outside MD land complete all as specified and directed. (Both glazed and gauged windows will be measured separately)

Taking down steel windows glazed and gauged with guard bars exc. 1.5 sqm and not exc. 2 Sqm each and including all fittings and fixtures and removed from site and disposed off outside MD land complete all as specified and directed. (Both glazed and gauged windows will be measured separately)

Taking down or detaching old MS grill by cutting and refixing in the same location including all necessary arrangement and T&P by contractors own arrangement of size exc. 0.5 sqm and not exc. 1 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregate and including all fittings and fixtures and removed from site and disposed off outside MD land complete all as specified and directed.

Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of exc. 1 sqm and not exc. 1.5 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand incl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed.

Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of size exc. 1.5 sqm and not exc. 2 Sqm each each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand including all fittings and fixtures and removed from site and disposed off outside MD land complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for windows, ventilators with extruded built up standard 2/3 track sliding section of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for ventilators with extruded built up standard rectangular/square section including PVC strips for holding of louvers of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified.

S&F powder coated Anodised aluminium sliding window shutter type without sash bars, aluminium sections weighing 0.55 kg/m including powder coating of any colour ,thickness not lessthan 50 microns necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed.

Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm each

S&F Factory Made single extruded WPC (Wood polymer composite) solid door/windows and other frames / chowkats of size 65mm x 100mm single rebated comprising of virgin PVC polymer of K value 58-60 (SuspensionGrade) calcium carbonate and natural fibres (Wood powder/rice husk/wheat husk) and Non-toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws withdrawal strength of 2200 N (Face) and 1100 N (Edge) minimum compressive strength of 58 N/Sq mm, modulas of elasticity 900 N/Sq mm and resistance to spread flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS holdfast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS holdfast/lugs or SS dash fastener shall be paid for separately)

S&F Factory Made single extruded WPC (Wood polymer composite) solid door/windows and other frames / chowkats of size 65mm x 125mm double rebated comprising of virgin PVC polymer of K value 58-60 (SuspensionGrade) calcium carbonate and natural fibres (Wood powder/rice husk/wheat husk) and Non-toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws withdrawal strength of 2200 N (Face) and 1100 N (Edge) minimum compressive strength of 58 N/Sq mm, modulas of elasticity 900 N/Sq mm and resistance to spread flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS holdfast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS holdfast/lugs or SS dash fastener shall be paid for separately)

S&F Factory Made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4, 6 raised panels design with 2mm thick moulded prelam PVC sheet on the front and back face with particle board core and fixing in the frame at site as per specification and drawings.

S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc, with plain, chamfered or ounded, mitred and rebated sash bars, any numbers to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered complete all as specified and as directed.

S&F in repairs to existing steel window shutter hinges by means of replacing the old hinge with box type/projecting type and welded to steel shutter and make it functional completely including all necessary arrangement by contractor at his own arrangement complete all as specified and directed(G+3 Storey bldgs and 50 Nos in each storey).

S&F stainless steel 100 mm butt hinges for doors complete all as specified.

S&F stainless steel 75 mm butt hinges for doors complete all as specified.

S&F 150 mm size extruded aluminium alloy handles for doors fabricated type anodized complete all as specified.

S&F 150 mm long aluminium anodized barrel tower bolts for PVC doors and windows of extruded section complete all as specified.

S&F 200 mm long aluminium anodized barrel tower bolts for doorsof extruded section complete all as specified.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified

S&F mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.

S&F sheet glass ordinary quality tinted 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed.

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed

S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for cold water complete all as specified.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 450mm*600mm complete all as specified and as directed

S&F in repairs Bib tap cast copper alloy 15mm fancy type Chromium plated screwed down, high pressure, with capstan head screwed down screwed for iron pipe.

S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair 15 mm bore diameter brass CP wall mixer any type complete all as specified and as directed.

S&F in repair pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair complete all as specified and directed.

S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed .

S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed .

S&F in repairs over head shower chromium plated 95 mm dia with 3 flow with SS over head shower arm of 180mm with flange complete all as specified and directed.

S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed.

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement with dismatnling of old nahani trap with necessary PCC/ cement work complete all as specified and as directed.

S & F in repairs looking mirror of 5 mm thick 500mmx700mm with double coat for protection and longevity grounded edges for safety and silver plating on the back for better refelection and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed.

S&F in repairs Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs.

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

S&F in repairs CPVC ball valve 20 mm internal dia complete all as specified and as directed

S&F in repairs CPVC tank union 20mm internal dia complete all as specified and as directed

S&F in repairs Tank adapter 20 mm internal dia complete all as specified and as directed

S&F in repairs 20 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density PVC Plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified.

S&F in repairs 20 mm internal bore tank nipple suitable for HDPE water tank. (Min wt 45 gms).

S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank complete all as specified.

SKANDA CONSTRUCTIONS (BID ID -3144896)