Lamp Ballast for HPSV Lamps
Fluorescent lamps (Fluorescent tubular lamps)
Light Emitting Diode LED Fixture- LED tube light Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 3 Year (s) MSME Exemption For Years Of Experience And Turnover Yes Lamp Ballast For HPSV Lamps ( 500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes * ISI Marked No Yes
No ISI marked if yes declare CM/L Number If 'No' write NA NA * 1/8 Ballast Wattage (in Watts) 70 W 70 W
150 W
250 W
400 W Operating Voltage 220 Volt -240 Volt * Supply frequency (in Hz) 50 Hz +/-5% * CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes * Winding material Copper wound * Supply current: At rated voltage
the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes * Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes * Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes * Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes * Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes * Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes * 2/8 Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm * Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes * Rated Maximum operating temperature of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 1:2011 latest) 105 deg C * Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes * Ballast shall pass High voltage test 5 KV for 5 Seconds Yes * Watt Loss 15 Watts maximum for 70 W Ballast * Cold resistance at 20 deg. C (Tolerance: t+5%
10%) - must declare +5% * Circuit power factor >/=0.85 * WARRANTY Guaranteed period of replacement 1 Year * CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast
Watt Loss
Tw details Yes * Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Yes * Test Report Number 1145/15 * Test Report Date 11/04/15 * Name of Test Lab BAJAJ LAB * Address of Test Lab DELHI * * Bold specifications are the golden parameters. Consignees and Quantity 3/8 S.No. Consignee Address Quantity Delivery Days 1 Prem Kumar Suman 451111
NAGARPALIKA CAMPUS at BUS STAND SANAWAD
451111 500 15 Fluorescent Lamps (Fluorescent Tubular Lamps) ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Flourescent tubular lamps conforming to IS: 2418:1977 (Part1
2
3 and 4) with latest amendments Yes * ISI Marked Yes * If ISI market 'Yes' declare CM/L No IS 16102 * Star rating level 3 Star 3 Star
5 Star Rated Wattage (in Watts) 36W 18W HL
36W HL
18W
36W Rated Colour 6500 K * Rated Luminous flux with colour rating 2425 for 36W with 6500 K 1250 for 18W HL with 6500 K
3100 fpor 36W HL with 6500 K
1015 for 18W with 6500 K
2425 for 36W with 6500 K CONSTRUCTIONAL Cap designation G-13 * Method of starting With starter * Cathode type Pre heated * Rated life of lamp Minimum 5000 hours * "The lamp dimensions shall he as speciiied on the individual lamp data sheet in IS : 2418 ( Part II )-1977 with latest amendments" Yes * Marking on the lamps as per IS:2418 :1977 (Part 1) with amendments and marking requirements Yes * 4/8 as per energy star requirements WARRANTY Guaranteed period of replacement 1 year * REPORTS AND CERTIFICATION Flourescent tubular lamps shall pass and comply with all the acceptance test requirements as per Cl 6 1 2 of 2418 1977 (Part1) with latest amendments And seller shall furnish test reports on demand by buyer/consingee Yes * Flourescent tubular lamps shall pass and comply with all the routine test requirements as per Cl 6 1 3 of : 2418:1977 (Part1) with latest amendments And seller shall furnish test reports on demand by buyer/consingee Yes * For Energy Star Level Flourescent tubular lamps shall comply with Gazeettee notification No. S.0.178(E) dated 16th January
2009
S.0.179(E) dated 16th January
No.2/11(5)/03-BEE.-1 dated 6th July
Amdt.
No.2/11(5)/03-BEE-1 dated 5th January
2010 Yes * Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable. Test reports shall furnish on demand by buyer/consignee Yes * Test Report Number AS PER REQUIRES * 5/8 Test Report Date AS PER REQUIRES * Name of Lab AS PER REQUIRES * Address of Lab AS PER REQUIRES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prem Kumar Suman 451111
451111 200 15 Light Emitting Diode LED Fixture- LED Tube Light ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 22 Watt/2200 lumen 18 Watt/1800 lumen
20 Watt/2000 lumen
22 Watt/2200 lumen Colour Temperature (K) 6500 2700
4000
5700
6500 Warranty for free replacement (Years) 2 years 2 years
3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Polycarbonate Polycarbonate
Glass LED Fixture With Al back
front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without * Light Source SMD LED Chip * LED Make SURYA JAN2018 * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) >/= 80 * Total Harmonics (%) * LED Tubelight Life of Yes * 6/8 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) >/= 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0
25 * Power Factor >/= 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date - * Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report - * 7/8 Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes * EMC Test Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prem Kumar Suman 451111
451111 200 15