ADDN ALTN TO TOILET IN BLDG NO 229 AND PROVN OF TOILET IN BLDG NO 48 AT AF STN MEMAUR

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc complete all specified and directed

Excavation in trenches, in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundation etc.and getting out complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass conmcrete complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed

All as per item 4 above -ditto- but in CM 1:6

M&L for rendering 15 mm thick on fair faces of brick work in cement 1:4, finished even and smooth without using extra cement complete all as specified and directed.

All as per item 6 above -ditto- but in CM 1:6

All as per item 6 above -ditto- but 5 mm thick in CM 1:3

M & L for prepration of new plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified an directed.

S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F of mild steel framed work such as joist, channel, angle of size 40x40x6mm or tee section conforming to Fe 410 (Gde E-250) complete all as specified & directed.

Supply & fix solid PVC door frame of size50 x 47mm made out of 5mm thick prelam PVC sheet instead of plain colour PVC sheet reinforced with 19mmx19mm MS square tubes complete all as specified & directed.

S&F factory made solid panel PVC shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded wood grain printed coloured PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both side prelam PVC Sheet instead of plain colour PVC sheets & 5mm thick x 15mm wide PVC sheet beading inside for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of both side prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with decorative PVC beading of 10mm x 10mm used and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawings.

S & F for stainless steel hinges 100 mm fixed to door frame complete all as specified and directed.

S & F for 125 mm long extruded aluminium alloy handles, fabricated type, of approved design fixed complete all as spefied and directed.

S & F of 150 mm long (Length of bolt) aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregates as in sub base of path/ hard standing finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Non-skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm screed bed in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls and ceiling, chajjas etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work in cement 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M & L for prepration of new plastered or unplastered surfaces of wall applying two coats of oil bound distemper complete all as specified and directed.

M&L for 300 x 450 x 7 mm thick joint free Glazed ceramic coloured tiles(premium quality) in dado/skirting set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm plaster in cement mortar 1:3 complete all as specifed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern) cascade type with dual flushing cistern white model No. CHISEL Cat No S1013129S of Cera/ ELEMENT S22 of Hindware/ ENTICE C847K of Parryware as approved , white including connection to drain or out going pipe and flush pipe anti syphonage pipe etc incl slow fallen seat cover white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and as directed.

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed (Tee, reducer, elbow etc)complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm dia tubes medium grade galvanised, with all fitting and fixed (Tee, reducer, elbow etc) complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply & fix 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed .

Supply & fix 15 mm dia angle stop cock fancy type chromium plated CP screwed down high pressure with flench screwed to connect with PVC connections both ends for iron or for union complete all as specified and directed. Make: Cera F2002201

Supply & fix vitreous china wash hand basin, white size 550x400 mm including brackets, CP waste coupling &PVC waste pipe of 32 mm dia complete all as specified and directed.

S & F PVC connection with CP brass nuts 375 mm long all as specified and directed .

S&F 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete all as specified & directed.

Supply & fix bib taps brass cromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed .

S&F stain less steel floor trap 100 mm bore with grating including jointing to waste pipe in cement mortar as in repairs complete all as specified & directed.

S&F chromium plated towel rail 600 mm long, 20mm dia of a approved quality, complete all as specified & directed.

S&F health faucet, chromium plated with 1.25 mtrs pipe of approved make and quality complete all as sepecified and directed.

M&L for reinforced concrete pipes 150mm dia, class NP 2 laid and jointed complete with collares complete all as sepecified and directed.

M&L for concrete bed to drain pipes of 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested in 1:3:6 type C-2 complete all as sepecified and directed.

Returning,filling, including spreading, levelling, watering and well ramming in layers not exe 25cm complete all as specified and directed

Removing excavated material n exe 50m and depositing where directed at a level n.exe 1.5m above the starting point complete all as specified and directed

Material & labour for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed .

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description as in frame work for false ceiling etc complete all as specified and directed

S&F of Asbestos cement plain building boards of 4mm thick with Anodised aluminium snap grid frame work (size of grid 605 x 605mm) for false ceiling complete all as speciofied & directed.

S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors windows, ventilators and partitions (size of section 44x47x1.5mm) (grid frame work of aluminium section n.exc 1.5x1.5m or as per site requirement and fixed positions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed menchanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

Supplying and fixing 5.5 mm thick sheet glass ordinary quality, tinted, exceeding 0.50 Sq m in each pane fixed to aluminium frame work with necessary glazing clips/rubber packing/gasket, screws etc complete all as specified and as directed by Engineer-in-Charge.

M&L for Particle board, medium density, flat pressed, single layer type or three layer type, BWR grade board of 12mm thickness, exterior grade, laminated on both sides fixed to aluminium framework with screws with all necessary accessories etc all as specified and directed

S & F 30mm thick factory made moulded PVC door shutter consisting of solid core single leaf particle board of 25mm thickness lipped with 15mm (5mmX3 )X25mm width on one stiles on top rail & 10mm(5mmx2) Thick X25mm width on the other stiles & bottom rails.Shutter panel laminated with 2mm thick termite proof,water proof and fire resistantmoulded pvc sheet with 2 4 6 raised panel design in different prelam colours on one side after routing the moulded design on flush door/ particle board& 2mm prelam pvc sheet on other side using rubber based adhesive on flush door& solvent cement adhesive on the pvc lipping etc complete as specified and as dirction by Engr-IN-Charge. Make:M/s Kumar Arch Tech Ltd, M/s Rajshri, M/s Duroplast Extrusion P Ltd

S & F 30mm thick factory made Plain wiremesh PVC door shutter cosisting of frame made of MS Tubes of 19 guage thickness and size of 19mmx19mm for stiles and 15mmx15mm for top,lock and bottom rail.MS frame shall have a coat of metal primer of approved make and manufacturer.19mmx19mm MS square tubes shall be covered with heat moulded plain sheet 'c' channel made from 5mm thick pvc sheet of density 600 kg/cum manufactuered by ISO-9001-2015 certified company of size 30mm thickness ,115mm widthout of which 100 mm shall be flat and 15mm shall be bent in 90 angle on eitheer side forming stiles, one of 90 bend edge is cut from stiles as wll as rails to nails fromm iner side of door to hide wiremesh fixing steel screws.5mm thick 140mm wide pvc sheet out of which125mm shall be flat and 15mm shall be bent in 90 on innerside to frm top to bottom rail and 155mm wide pvc sheet out of which 125mm shall be flat and 15mm shall be bent in 90 on both side to from lock rail. An additional 5mm thick pvc strip of 20 mm width is to be stuck on enterior side of the C channel using PVC solvent cement adhesive . Panel will be of SS wire mesh of 24 guage to be fitted inside area of stiles and rails. The wire mesh of Top Bottom& lock rail is sealed with 15 mmx15mm tube with steel screw of size 13/16mm. 10mm(5mmx2 nos) thick pvc strip of 25 mm width is to be stuck and nail on both side of SS wiemesh interior at the top,bottom&lock rail. 10mm thick(5mmx2nos) thick, 20mm wide cross pvc sheet as gap insert for top rail & bottom rail door to be fitted to frame with 3 nos MS powder coated butt hinges size 100mmx25mmx2mm and 32mm long screw drilled suitable to pass through both the wall of MS tubes. other hardware should be fixed fixed with 19mmx6mm size steel screw complete as specified and as dirction by Engr-IN-Charge. Make:M/s Kumar Arch Tech Ltd, M/s Rajshri, M/s Duroplast Extrusion P Ltd

Supply & fix aluminium anodized barrel tower bolts 200mm long, of extruded section complete all as specified & directed.

S&F 300 mm long ISI Mark aluminium anodized sliding door bolt, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

Supply & fix ISI Mark aluminium handles 150 mm long, cast type, anodized complete all as specified & directed.

Supply & fix stainless steel butt hinges 100mm long complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .

M & L for glazed ceramic coloured, designer wall tiles, of stone finish in vertical surface 1200mmX 2400mm X 10mm thick as approved set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10 mm thick rendering in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.

All as item No.57 above -ditto- but in floor surface.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F factory made solid panel PVC shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded wood grain printed coloured PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both side prelam PVC Sheet instead of plain colour PVC sheets & 5mm thick x 15mm wide PVC sheet beading inside for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of both side prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with decorative PVC beading of 10mm x 10mm used and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawings.

S&F door shutter with 12mm thick toughened glass including engraved "King or Queen" logo of Make- Modi Guard/Saint Gobain including fixing with stainless steel cleats ot brackets ,including door handle 'H' type with all necessary fittings with floor spring & locking arrangement and widening of door complete all as specified and as directed by Engr-in-charge.

M & L for prepration of new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified an directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed .

S&F CP towel ring of Brand- Hi-life,make-KPS Sanitation(P)Ltd,cat part no. D-502.(Diamond Series) or equivalent make of Prayag/Cera/Parryware.

S&F in repair vetrious china Wash Hand Basin white ceramic vanity Type Model No. AMBER WALL HUNG size 600mmx480mm with wall mounted cabinet size 580mmx460mmx450mm including all necessary fittings brackets complete all as specified and as directed by Engr-in-Charge

S&F Soap dispenser modern type with necessary fittings complete all as specified and dircted.Make-KPS Sanitation Cat no-S1908

S&F CP brass towel rack of Brand- Hi-life,make-KPS Sanitation(P)Ltd,Cat part no-D-511(Dimond series) complete all as specified and as directed by Engineer-in-Charge or equivalent make of Prayag/Cera/Parryware.

S&F soap dish Chromium plated brass fancy type of Brand- Hi-life,make-KPS Sanitation(P)Ltd, cat part No-D-503 complete all as specified and as directed by Engineer-in-Charge or equivalent Make: Prayag/Cera/Parryware.

M/L for machine cut 14 to 16mm thick Granite black /coloured and fixed as partition wall of urinals/wash hand basin platform and the like with grey cement slurry and pointed in white cement with admixture of pigment to match including cutting , polishing and necessary bull nozing/ full round grinding complete all as specified & directed .

S&F in repairs health faucet,chromium plated with 1 mtrs pipe of approved make and quality complete all as sepecified and directed.Make-KPS Sanitation,WE-341

S & F in repairs chromium plated fancy type angle stop cock for 15 mm bore size complete all as specified and directed.

S&F basin mixer cast copper alloy fancy type with single leaves capstan heads,CP screwed down high pressure ,with or without lettered "Hot or Cold "with long screw shanks for 15mm bore of iron pipe complete all as specified and directed. Make-Hindware

S&F in repairs chromium plated Toilet paper holder box type Make-KPS Sanitation Cat No.T-906 complete all as specified and dircted.

S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F ISI marked cast iron floor trap 100 mm bore with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) as in repairs complete all as specified & directed.

S & F in repair glass corner 5 mm thick with railing 12" incl. fixing device of approved quality and make complete all as specified and directe.Make-KPS Sanitation.EC-741

M&L for removing of existing urinal pot with fittings complete all as specified and as directed by Engr-in-charge.

S&F urinals pot (size 1950x600mm), bowl type (back or corner wall type) with urinal spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flusing cistern with brackets including waste coupling and waste pipe connecting to main outlet pipe complete all as specified and directed. Make: Jaquar (1810UF)

S&F aluminium powder coated ventilator of approved colour and made with section size 44mmX44mm X1.5mm thick and glass shutter including chequered grill 5 mm thick with wiremesh complete all as specified and directed.

M&L for applying evel;y a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning of surface complete all as specified and directed

M & L for applying ploythere film, 150 micron thick, laid on a coat of bitumen, @ 0.30 to 0.50 Kg per Sqm complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregates as in DPC finsshed the surface even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and direct

Supply & fix mild steel deformed bars 6 mm to 8 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hookoing ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed

Material & labour for reinforced cement concrete 1:2:4 tuype b0 (using 12.5 mm graded aggregate used as in half brick wall height more than 1.5 m etc complete all as specified and directed.

M&L for point wiring for light / fan/ Exhaust fan controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade (ISI Marked) having dia. not less than 20mm with all fittings including MS galvanised pressed steel terminal sunken boxes of thickness not less than 1.0 mm of required module for mounting modular switches, sockets etc. including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified and directed .

All as per srl item No 87 above but for 5 pin 5 amps socket outlet independent board complete all as specified and directed.

All as per item No. 87 here-in-before but by using 2.5 Sqmm FRLSH copper conductor cable with continuous earth wire of 2.5 Sqmm FRLSH copper conductor for one 3 pin 15 Amp socket outlet point controlled by one switch.

S&F switch modular type 10 Amps, 230 V AC, single pole, one way, IP 20 rating, super glossy finish complete all as specified and directed. Make: Anchor Europa or equivalent in Havells( Brand Crabtree)/Legrand

S&F switch modular type 16 Amps, 230 V AC, single pole, one way, IP 20 rating, super glossy finish complete all as specified and directed. Make: Anchor Europa or equivalent in Havells( Brand Crabtree)/Legrand

S&F socket modular type 10 Amps, 2 module, 230 V AC, with safety shutter having super glossy finish complete all as specified and directed. Make: Anchor Europa or equivalent in Havells( Brand Crabtree)/Legrand

S&F socket modular type 20/10 Amps, 2 module, 230 V AC, with safety shutter having super glossy finish complete all as specified and directed. Make: Anchor Europa or equivalent in Havells( Brand Crabtree)/Legrand

S&F cover plate with base frame having metal insert of 3 module, pure white, super glossy finish complete all as specified and directed. Make: Anchor Europa or equivalent in Havells( Brand Crabtree)/Legrand

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

S&F LED batten, 2 Ft surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption < 10W luminaire lumen >1000 lms, luminous efficiency > 100 lumens /watt, LED make : Nichia/Cree/Everlite/Eclison/Osram Ltd with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 ºC, driver efficency >85%, power factor >0.95, THD <10% as per IEC 61000-3-2, colour temp - 6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with operating voltage range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification and connecting the same in electric source with and using PVC sheathed and insulated 3 core copper conductor cable of size 0.75 Sqmm and fixing arrangement for fixing the light fitting complete all as specified and directed.

supply and fixing air ventilating fan 300 mm sweep Metallic body, AC, single phase, 230 volts, complete with louvers shutters and including PVC insulated 3 core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete including cutting the square / round hole of required size in wall, finishing the same for distrubed surfaces to match with the adjoining surfaces all as specified and directed. Make : Havells/Bajaj//Orient/Anchor

S & F of water heater storage type 25 Ltrs, Electrically operated, 5 star rating with ABS/Steel body and stainless steel inner tank duly insulated with PUF insulation and heating element of 2 KW complete with all accessories such as safety valve, thermostate, NRV, PVC connection etc complete all as specified and directed. Make : Bajaj/Racold/Usha/Venus

M/S PRATAP ENTERPRISES

M/S SURYA ASSOCIATES